journal article·2022-11

Effect of slurry particles on PVA brush contamination during post-CMP cleaning

Samrina Sahir, Hwi-Won Cho, Palwasha Jalalzai, Suprakash Samanta, Satomi Hamada, Tae-Gon Kim, Jin-Goo Park

Publisher page

Abstract

PVA (polyvinyl acetal) brush scrubbing is a widely used post-CMP cleaning process due to its low cost and high cleaning efficiency. However, during these processes, the PVA brush gets contaminated with abrasive particles that result in wafer cross-contamination and reduced cleaning efficiency. This study investigated the effects of abrasive types such as silica and ceria, the slurry pH, and the scrubbing process parameters on brush contamination. Ceria slurries showed significantly more contamination of brushes compared to silica slurries. The brush contamination increased with a decrease in pH from 7 to 4 due to increased electrostatic attractive forces between the ceria particles and the brush surfaces, although very low brush contamination was observed by the ceria slurries at pH 10 due to a strong electrostatic repulsion. Conversely, very low brush contamination was observed for the silica slurries at all pH values due to the reduced interaction between the particles and the brush surface (electrostatic repulsion). Furthermore, there was no significant effect of gap distance and brush rotation speed on brush contamination. The abrasive concentration and the contamination process time showed a linear relationship as the contamination was significantly increased by increasing the abrasive concentration in slurry and process time. These results indicate that brush contamination is more sensitive to the abrasive nature and concentration, the slurry pH, and the process time than to other parameters.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Particle technology in chemical mechanical planarization10.14356/kona.2007010 ↗
2. Moore's law: past, present, and future10.1109/6.591665 ↗
3. Perspective-electrochemical assessment of slurry formulations for chemical mechanical planarization of metals: trends, benefits and challenges10.1149/2.0231804jss ↗
4. Enhanced open innovation: CMP innovation to open new paradigm10.1149/2.0161905jss ↗
5. Chemical mechanical planarization: slurry chemistry, materials, and mechanisms10.1021/cr900170z ↗
6. Mechanisms for nanoparticle removal in brush scrubber cleaning10.1016/j.apsusc.2010.10.115 ↗
7. Post cleaning for FEOL CMP with silica and ceria slurries10.1149/2.0101710jss ↗
8. Mikhaylichenko · 2017
9. Assessment of post-CMP cleaning mechanisms using statistically-designed experiments10.1016/S0040-6090(98)01038-4 ↗
10. Chemical mechanical planarization for microelectronics applications10.1016/j.mser.2004.06.002 ↗
11. Particle adhesion and removal mechanisms during brush scrubber cleaning10.1116/1.1815319 ↗
12. Yang · 2017
13. Yang · 2016
14. Lee · 2017
15. The role of interactions between abrasive particles and the substrate surface in chemical-mechanical planarization of Si-face 6H-SiC
16. Study on PVA brush loading and conditioning during shallow trench isolation post-CMP cleaning process10.1149/2162-8777/ac5166 ↗
17. Comparative evaluation of organic contamination sources from roller and pencil type PVA brushes during the post-CMP cleaning process10.1016/j.polymertesting.2020.106669 ↗
18. Effect of brush treatment and brush contact sequence on cross-contaminated defects during CMP in-situ cleaning10.9725/kstle.2015.31.6.239 ↗
19. A breakthrough method for the effective conditioning of PVA brush used for post-CMP process10.1149/2.0111906jss ↗
20. Ultrasound-induced break-in method for an incoming polyvinyl acetal (PVA) brush used during the post-CMP cleaning process10.1016/j.polymertesting.2019.105962 ↗
21. Study of the cross-contamination effect on post-CMP in situ cleaning process10.1016/j.mee.2015.03.033 ↗
22. The effect of PVA brush scrubbing on post-CMP cleaning process for damascene Cu interconnection10.4028/www.scientific.net/SSP.145-146.367 ↗
23. Structural effect of PVA brush nodule on particle removal efficiency during brush scrubber cleaning10.1007/s12541-012-0058-7 ↗
24. Morphology and the isoelectric point of nanosized aqueous ceria sols10.1016/j.matchemphys.2014.08.063 ↗
25. Kim · 2018
26. Reduction of scratch on brush scrubbing in post-CMP cleaning by analyzing contact kinetics on ultra low-k dielectric10.1149/1.3123779 ↗
27. Contamination mechanism of ceria particles on the oxide surface after the CMP process10.1149/2162-8777/abcf13 ↗
28. Investigation of the effect of different cleaning forces on Ce-O-Si bonding during oxide post-CMP cleaning10.1016/j.apsusc.2021.149035 ↗
29. The behavior of zeta potential of silica suspensions10.4236/njgc.2014.42004 ↗
30. Role of the surface chemistry of ceria surfaces on silicate adsorption10.1021/am500816y ↗
31. Fundamental study of the removal mechanisms of nano-sized particles using brush scrubber cleaning10.1116/1.2052713 ↗
32. Particle adhesion and removal mechanisms in post-CMP cleaning processes10.1109/TSM.2002.804872 ↗
33. Brush deformation effects on poly vinyl acetal brush scrubbing10.1149/2.0191804jss ↗
34. Contact area distribution during PVA brush scrubbing10.1149/09202.0183ecst ↗
35. Effect of various cleaning solutions and brush scrubber kinematics on the frictional attributes of post copper CMP cleaning process10.4028/www.scientific.net/SSP.145-146.363 ↗
36. Efficient fabrication of ultrasmooth and defect-free quartz glass surface by hydrodynamic effect polishing combined with ion beam figuring10.1364/OE.22.013951 ↗