Solder joint reliability performance study and shear characterization of low-Ag SAC lead-free solders for handheld application
Source abstract
Abstract
As handheld electronic products move toward smaller and thinner form factor, the demand of high reliability under stringent field usage also increasing. Drop test, based on the JEDEC JESD22-B111A, accompanied with temperature cycling (TC) test, based on JEDEC JESD22-A104F, are two of the most critical board-level reliability tests for handheld makers. In terms of solder joint reliability (SJR), total 7 candidates of LF35-liked lead-free solder alloys are investigated for its drop performance, and TC reliability evaluation. Among 7 solders, leg 4 and 5 exhibit both decent drop and TC behavior, which are likely owing to the silver (Ag) precipitation hardening and bismuth (Bi) solid solution hardening effect respectively. In addition, the shearing mechanical characterization of 7 solder alloys are being studied. Shear strength of leg 4 and 5 shows higher strength value than others. In terms of failure analysis under drop test, three main fracture modes are observed, including via cracking at PCB side, solder/intermetallic compound (IMC) cracking at package side, and Cu trace broken at package side. Furthermore, in terms of failure modes of TC test, solder/IMC cracking at package side are the main fracture modes. In summary, this study provides an overall reliability performance mapping for 7 solders, and list out a table comprising of shear strength, void% analysis, TC reliability, and drop reliability performance for each LF35 solders which lays out potential future solder alloy to meet higher handheld phone drop reliability margin.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. 2003 · 1
2. Influence of sn grain size and orientation on the thermomechanical response and reliability of pb-free solder joints10.1109/TCAPT.2008.916835 ↗
3. The effects of aging temperature on SAC solder joint material behavior and reliability
4. The effects of SAC alloy composition on aging resistance and reliability
5. Characterization and comparison of five SAC-based solder pastes for Pb-free reflow soldering
6. Thermal cycling fatigue analysis of SAC387 solder joints
7. Effective solder for improved thermo-mechanical reliability of solder joints in a ball grid array (BGA) soldered on printed circuit board (PCB)10.1007/s11664-020-08525-9 ↗
8. Reliability of the aging lead free solder joint
9. The effects of aging on the cyclic stress-strain behavior and hysteresis loop evolution of lead free solders
10. ‘Evolution of Pb-free solders’, recent progress in soldering materials
11. https://www.investing.com/commodities/silver.
12. Pandher · 2009
13. Comparative study of solder strength characterization for BGA packages
14. Investigating the microstructural and mechanical properties of pure lead-free soldering materials (SAC305 & SAC405)10.1515/pmp-2018-0006 ↗
15. Microstructure and mechanical properties of lead-free solders and solder joints used in microelectronic applications10.1147/rd.494.0607 ↗
16. Microstructural stability of Sn–1Ag–0.5Cu–xAl (x=1, 1.5, and 2wt.%) solder alloys and the effects of high-temperature aging on their mechanical properties10.1016/j.matchar.2013.01.015 ↗
17. Improved drop reliability performance with lead free solders of low Ag content and their failure modes
18. Evaluation of high compliant low Ag solder alloys on OSP as a drop solution for the 2nd level Pb-free interconnection
19. Drop performance research of silver content on the SnAgCu based lead-free solder of joint level
20. Drop shock reliability of lead-free alloys - effect of micro-additives
21. Ag₃Sn compounds coarsening behaviors in micro-joints10.3390/ma11122509 ↗
22. Study on coarsening of Ag3Sn intermetallic compound in the Fe-modified Sn–1Ag–0.5Cu solder alloys10.1016/j.jallcom.2014.10.042 ↗
23. Time-lapse imaging of Ag3Sn thermal coarsening in Sn-3Ag-0.5Cu solder joints10.1007/s11664-020-08498-9 ↗
24. Lead (Pb)-Free solders for high reliability and high-performance applications
25. Investigation of reflow effect and empirical lifetime modeling on the board level solder joint reliability
26. Design of experiments for board-level solder joint reliability of PBGA package under various manufacturing and multiple environmental loading conditions10.1109/TEPM.2008.2005905 ↗
27. Effect of printed circuit board design parameters on solder joint reliability for memory packages
28. Single factor study of solder joint reliability for MCP packages
29. Drop reliability study of PBGA assemblies with SAC305, SAC105 and SAC105-Ni solder ball on Cu-OSP and ENIG surface finish
30. Study of five substrate pad finishes for the co-design of solder joint reliability under board-level drop and temperature cycling test conditions
31. Risk assessment of hybrid low temperature solder on surface mount technology and board level reliability for BGA packages
32. A comprehensive study of solder joint reliability dependent on temperature cycling profiles and material selections with emphasis on an improved solder fatigue lifetime model
33. The effect of micro-alloying and surface finishes on the thermal cycling reliability of doped SAC solder alloys10.3390/ma15196759 ↗
34. Thermo-mechanical reworkable epoxy underfill in board-level package: material characteristics and reliability criteria
35. Reliability evaluation and selection of underfill adhesives
36. Effect of unfilled underfill on board level reliability
37. Underfill encapsulants and edgebond adhesives for enhance of board level reliability
38. Analysis of edge and corner bonded PSvfBGA reliability under thermal cycling conditions by experimental and finite element methods10.1016/j.microrel.2012.06.089 ↗
39. Partial underfill impact study on solder joint reliability in smartphone application
40. IPC-A-610, Acceptability of Electronics Assemblies.
41. 2006
42. IPC-9701A, Performance Test Methods and Qualifications Requirements for Surface Mount Solder Attachments.
43. 2023
44. Board level drop test method of components for handheld electronic products
45. 1992
46. Weibull analysis of reliability data with few or no failures10.1080/00224065.1985.11978953 ↗
47. A parameter estimation of Weibull distribution for reliability assessment with limited failure data10.1109/IFOST.2007.4798514 ↗
48. A study on the'Substation reliability assessment using Weibull distribution
49. An example on estimating Weibull scale (eta) and shape (beta) parameters from sample failure data
50. Gan · 2023 · 21
51. 2003
52. Surface Mount Technology: Common Problems and Solutions For Efficient SMT Assembly”, https://www.jhdpcb.com/blog/efficient-smt-assembly/([Online]).
53. Process optimization for CCGA surface mount assembly based on Physics of failure
54. Accelerated thermal cycling and failure mechanisms for BGA and CSP assemblies10.1115/1.1289627 ↗
55. Shock performance study of solder joints in wafer level packages
56. Design for board trace reliability of WLCSP under drop test
57. Review of the impact of intermetallic layers on the brittleness of tin-lead and lead-free solder joints
58. The effect of copper trace routing on the drop test reliability of BGA modules
59. Design for board trace reliability of WLCSP under drop test
60. Wafer level chip scale packaging (WLCSP): an overview10.1109/6040.846634 ↗
61. Gan · 2023 · 95
62. Statistical aspect on the measuring of intermetallic compound thickness of lead free solders