Application of bulk silicon carbide technology in high temperature MEMS sensors
Source abstract
Abstract
—SiC is widely used in power electronics and high-temperature devices due to its comprehensive physicochemical properties, including high thermal stability, mechanical strength, etc. In recent years, the advantages of SiC for MEMS have gradually attracted the attention of researchers. However, the development of bulk SiC technology in the field of MEMS sensors has not been reviewed, especially in the fabrication and performance of MEMS bulk SiC sensors. The purpose of this review is to summarize the development status of bulk SiC materials, processes and sensors. The existing pressure sensors, accelerometers and other sensors based on SiC are reviewed. And the possible technological innovations for bulk SiC MEMS sensors are further proposed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Horn · 2008
2. Kovacs · 1998
3. The resonant gate transistor10.1109/T-ED.1967.15912 ↗
4. A batch-fabricated silicon accelerometer10.1109/T-ED.1979.19795 ↗
5. A surface micromachined silicon accelerometer with on-chip detection circuitry10.1016/0924-4247(94)00815-9 ↗
6. MEMS: micro technology, mega impact10.1109/101.920875 ↗
7. Fujiyoshi · 2011 · 1010
8. SiC MEMS: opportunities and challenges for applications in harsh environments10.1016/S0257-8972(99)00374-6 ↗
9. Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications: a review10.1016/0038-1101(96)00045-7 ↗
10. Review of silicon carbide power devices and their applications10.1109/TIE.2017.2652401 ↗
11. Dinh · 2018
12. Zhao · 2019 · 675
13. Round · Electr. World · 1907 · 49 · 309
14. A review of silicon carbide development in MEMS applications
15. SiC sensors: a review10.1088/0022-3727/40/20/S17 ↗
16. Silicon carbide as a new MEMS technology10.1016/S0924-4247(99)00335-0 ↗
17. Single-source chemical vapor deposition of 3C-SiC films in a LPCVD reactor10.1149/1.1646141 ↗
18. Polycrystalline 3C-SiC thin films deposited by dual precursor LPCVD for MEMS applications10.1016/j.sna.2004.09.009 ↗
19. Strain and wafer curvature of 3C-SiC films on silicon: influence of the growth conditions10.1002/pssa.200674130 ↗
20. Control of 3C-SiC/Si wafer bending by the “checker-board” carbonization method10.1002/pssa.200460415 ↗
21. Femtosecond pulsed laser micromachining of single crystalline 3C–SiC structures based on a laser-induced defect-activation process10.1088/0960-1317/13/5/320 ↗
22. Laser micro machining of 3C–SiC single crystals10.1016/j.mee.2006.01.064 ↗
23. Wijesundara · 2011
24. A. D. Kurtz, T. A. Nunn, R. A. Weber, Fabrication of Dielectrically Isolated Fine Line Semiconductor Transducers and Apparatus, U.S. Patent 4672354, Jun, 9, 1987..
25. Doping of 6H–SiC by selective diffusion of boron10.1063/1.1329328 ↗
26. High temperature ohmic contact to a type 6H—SiC using nickel10.1063/1.358936 ↗
27. TEM study of Ni and Ni2Si ohmic contacts to SiC10.1016/S0925-9635(97)00069-1 ↗
28. Low resistance Ti Ohmic contacts to 4H-SiC by reducing barrier heights without high temperature annealing10.1063/1.4730435 ↗
29. Carrier transport mechanism of Al contacts on n-type 4H-SiC10.1016/j.matlet.2018.05.119 ↗
30. Wu · 2016
31. Temperature characteristics of 4H-SiC substrate and thin-film resistor applied in MEMS piezoresistive sensors10.1109/JSEN.2023.3330486 ↗
32. Recent progress in ohmic contacts to silicon carbide for high-temperature applications10.1007/s11664-015-4107-8 ↗
33. Titanium and aluminum-titanium ohmic contacts to p-type SiC10.1016/S0038-1101(97)00168-8 ↗
34. Mechanism of ohmic behavior of Al/Ti contacts to p-type 4H-SiC after annealing10.1063/1.1707215 ↗
35. A critical review of theory and progress in Ohmic contacts to p-type SiC10.1016/j.jcrysgro.2019.125353 ↗
36. Optimal design of SiC piezoresistive pressure sensor considering material anisotropy10.1063/1.5120083 ↗
37. Two-step femtosecond laser etching for bulk micromachining of 4H–SiC membrane applied in pressure sensing10.1016/j.ceramint.2022.01.100 ↗
38. Simulation analysis and fabrication of a silicon carbide-based piezoresistive accelerometer10.1088/1742-6596/2246/1/012007 ↗
39. Microresonators with Q-factors over a million from highly stressed epitaxial silicon carbide on silicon10.1063/1.4866268 ↗
40. Spatial mapping of multimode Brownian motions in high-frequency silicon carbide microdisk resonators10.1038/ncomms6158 ↗
41. Zhang · 2013 · 1016
42. Advanced 4H-SiC p-i-n diode as highly sensitive high-temperature sensor up to 460 °C10.1109/TED.2017.2711271 ↗
43. 4H-SiC p-i-n diode as highly linear temperature sensor10.1109/TED.2015.2496913 ↗
44. High-performance temperature sensor based on 4H-SiC Schottky diodes10.1109/LED.2015.2436213 ↗
45. Divanadium pentoxide/4H-silicon carbide: a Schottky contact for highly linear temperature sensors10.1016/j.proeng.2016.11.326 ↗
46. Simulation based studies on performance of SiC temperature sensors10.1016/j.matpr.2022.10.077 ↗
47. Quantitative analysis of piezoresistive characteristic based on a P-type 4H-SiC epitaxial layer10.3390/mi10100629 ↗
48. Piezoresistive effect in p-type 3C-SiC at high temperatures characterized using Joule heating
49. The piezoresistive effect of SiC for MEMS sensors at high temperatures: a review10.1109/JMEMS.2015.2470132 ↗
50. Design-dependent gauge factors of highly doped n-type 4H-SiC piezoresistors10.1088/0960-1317/22/8/085034 ↗
51. Characterization of highly doped n- and p-type 6H-SiC piezoresistors10.1109/16.662776 ↗
52. Design optimization and fabrication of a novel structural SOI piezoresistive pressure sensor with high accuracy10.3390/s18020439 ↗
53. Structural and electronic properties of cubic, 2H, 4H, and 6H SiC10.1103/PhysRevB.49.4485 ↗
54. Experimental investigation of piezoresistive effect in p-type 4H–SiC10.1109/LED.2017.2700402 ↗
55. Characterization of the piezoresistance in highly doped p-type 3C-SiC at cryogenic temperatures10.1039/C8RA05797D ↗
56. Piezoresistive properties of single crystalline, polycrystalline, and nanocrystalline n-type 3C-SiC10.1063/1.1775052 ↗
57. Characterization of monolithic n-type 6H-SiC piezoresistive sensing elements10.1109/16.285013 ↗
58. Pushing the limits of piezoresistive effect by optomechanical coupling in 3C-SiC/Si heterostructure10.1021/acsami.7b12128 ↗
59. Photoresponse of a highly-rectifying 3C-SiC/Si heterostructure under UV and visible illuminations10.1109/LED.2018.2850757 ↗
60. High-selectivity etching of polycrystalline 3C-SiC films using HBr-based transformer coupled plasma10.1063/1.1560561 ↗
61. Demonstration of p-type 3C–SiC grown on 150mm Si (100) substrates by atomic-layer epitaxy at 1000°C10.1016/j.jcrysgro.2011.06.041 ↗
62. Growth mechanism for alternating supply epitaxy: the unique pathway to achieve uniform silicon carbide films on multiple large-diameter silicon substrates10.1039/C5RA24797G ↗
63. Inductively-coupled plasma-enhanced chemical vapour deposition of hydrogenated amorphous silicon carbide thin films for MEMS10.1016/j.sna.2016.05.042 ↗
64. Reactive ion etching of silicon carbide in SF6 gas: detection of CF, CF2, and SiF2 etch products10.1063/1.1395520 ↗
65. Deep reactive ion etching of silicon carbide10.1116/1.1418401 ↗
66. Deep etching of silicon carbide for micromachining applications: etch rates and etch mechanisms10.1116/1.1387459 ↗
67. Reactive ion etching of SiC using C2F6/O2 inductively coupled plasma10.1007/s11664-002-0208-2 ↗
68. Surface roughness of silicon carbide etched in a C2F6/O2 inductively coupled plasma10.1116/1.1448509 ↗
69. High rate etching of 6H–SiC in SF6-based magnetically-enhanced inductively coupled plasmas
70. A study on the reactive ion etching of SiC single crystals using inductively coupled plasma of SF6-based gas mixtures10.1007/BF03027370 ↗
71. Etching of 4H-SiC using a NF3 inductively coupled plasma10.1007/s11664-004-0158-y ↗
72. Microtrenching-free two-step reactive ion etching of 4H-SiC using NF3/HBr/O2 and Cl2/O2
73. A study on the deep etching and ohmic contact process of 6H-SiC high-temperature pressure sensor
74. Profile evolution of high aspect ratio silicon carbide trenches by inductive coupled plasma etching10.1109/JMEMS.2016.2621131 ↗
75. SiC wafer bonding and deep reactive ion etching towards high-aspect ratio SiC MEMS fabrication10.1149/08605.0105ecst ↗
76. Etching of SiC in low power inductively-coupled plasma10.1134/S1063739719010074 ↗
77. A dry etching method for 4H-SiC via using photoresist mask10.1016/j.jcrysgro.2019.125351 ↗
78. High-temperature etching of SiC in SF6/O2 inductively coupled plasma
79. Mackowiak · 2020 · 1
80. Investigation of deep dry etching of 4H SIC material for MEMS applications using DOE modelling
81. Design and fabrication of bulk micromachined 4H-SiC piezoresistive pressure chips based on femtosecond laser technology
82. Femtosecond pulsed laser microfabrication of SiC MEMS microgripper10.2351/1.2567678 ↗
83. Bulk micromachining of SiC substrate for MEMS sensor applications10.1016/j.mee.2013.01.046 ↗
84. Application of femtosecond laser micromachining in silicon carbide deep etching for fabricating sensitive diaphragm of high temperature pressure sensor10.1016/j.sna.2020.112017 ↗
85. Mass fabrication of 4H-SiC high temperature pressure sensors by femtosecond laser etching
86. Femtosecond laser micromachining in combination with ICP etching for 4H–SiC pressure sensor membranes10.1016/j.ceramint.2020.10.220 ↗
87. Water-assisted femtosecond laser drilling of 4H-SiC to eliminate cracks and surface material shedding10.1007/s00170-020-06262-1 ↗
88. Development of laser-micromachined 4H-SiC MEMS piezoresistive pressure sensors for corrosive environments10.1109/TED.2022.3148702 ↗
89. Piezoresistive 4H-SiC pressure sensor with diaphragm realized by femtosecond laser10.1109/JSEN.2022.3174046 ↗
90. Application of femtosecond laser etching in the fabrication of bulk SiC accelerometer10.1016/j.jmrt.2022.02.012 ↗
91. Fabrication of 4H–SiC microvias using a femtosecond laser assisted by a protective layer10.1016/j.optmat.2021.111695 ↗
92. Non‐damage deep etching of SiC by hybrid laser‐high temperature chemical processing10.1111/ijac.14061 ↗
93. SiC Wafer Bonding by Modified Suface Activated Bonding Method
94. Mechanisms and mechanical properties of the interface between SiC and SiC by direct bonding
95. Direct wafer bonding of SiC-SiC by SAB for monolithic integration of SiC MEMS and electronics
96. Fabrication of bonded SiC structure with cavity based on direct bonding process for MEMS device applications10.1007/s00542-015-2710-5 ↗
97. Hermeticity analysis on SiC cavity structure for all-SiC piezoresistive pressure sensor10.3390/s21020379 ↗
98. Fabrication of SiC sealing cavity structure for all-SiC piezoresistive pressure sensor applications10.3390/ma14010128 ↗
99. Interface characterization and analysis of 4H-SiC direct bonding structure based on plasma processing
100. Low temperature hydrophilic SiC wafer level direct bonding for ultrahigh-voltage device applications10.3390/mi12121575 ↗