journal article·2025-02

Experimental study of chemical mechanical polishing of polycrystalline diamond based on photo-Fenton reaction

Ziyuan Luo, Jiabin Lu, Qiusheng Yan, Weiming Cai, Weilin Huang

Publisher page

Abstract

Polycrystalline diamond (PCD) is widely used in cutting tools, optical devices, and heat dissipation tools due to its exceptional hardness, wear resistance, and thermal conductivity. However, these excellent properties also make polishing the PCD surface a challenge. Traditional polishing methods struggle to achieve both high material removal efficiency and high-quality surface finishes simultaneously. This paper proposes a chemical mechanical polishing (CMP) method for PCD based on the photo-Fenton reaction. The method utilizes the reaction between H₂O₂ and Fe₃O₄ under ultraviolet (UV) light to generate highly oxidative hydroxyl radicals (·OH), effectively oxidizing the PCD surface to reduce the difficulty of processing. The concentration of ·OH and Fe 2⁺/Fe³⁺ in different reaction solutions was measured using spectrophotometry. Results indicate that the concentration of ·OH is highest in the photo-Fenton solution, and UV light promotes the conversion of Fe³⁺ to Fe 2⁺, sustaining the ongoing photo-Fenton reaction. Through single-factor polishing experiments, the effects of various processing parameters on the CMP performance of PCD were investigated. The results show that the material removal rate of PCD increases with increasing concentrations of H₂O₂, abrasive particle size, polishing pressure, and polishing disc speed. In contrast, the removal rate first increases and then decreases with increasing UV light intensity and Fe₃O₄ concentration. Additionally, the surface roughness (Ra) of PCD decreases initially and then increases with increasing UV light intensity, abrasive particle size, polishing pressure, and polishing disc speed, while it decreases with increasing Fe₃O₄ and H₂O₂ concentrations. Under the conditions of 100 mW/cm 2 UV light intensity, 2 wt% Fe₃O₄, 10 wt% H₂O₂, 5 wt% abrasive concentration, 0.5 μm abrasive particle size, 0.89 MPa polishing pressure, and a polishing disc speed of 60 r/min, the material removal rate of PCD reaches 698.7 nm/h, and the surface roughness Ra is 3.78 nm. The photo-Fenton reaction-based CMP method proposed in this paper provides a new approach to polishing hard-to-process materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Engineering a bandgap-regulable intermediate-band material based on diamond10.1016/j.carbon.2022.01.048 ↗
2. Diamond for high-power, high-frequency, and terahertz plasma wave electronics10.3390/nano14050460 ↗
3. Investigation of the cooling enhancement of a single crystal diamond heat sink with embedded microfluidic channels10.1016/j.diamond.2022.109470 ↗
4. Review on advances in microcrystalline, nanocrystalline and ultrananocrystalline diamond films-based micro/nano-electromechanical systems technologies10.1007/s10853-020-05699-9 ↗
5. Roughness control in the processing of 2-inch polycrystalline diamond films on 4H-SiC wafers10.1016/j.mssp.2024.108824 ↗
6. Polishing of polycrystalline diamond using synergies between chemical and mechanical inputs: a review of mechanisms and processes10.1016/j.carbon.2022.04.028 ↗
7. High-precision mechanical polishing method for diamond substrate using micron-sized diamond abrasive grains10.1016/j.diamond.2019.107644 ↗
8. Diamond nanoscale surface processing and tribochemical wear mechanism10.1016/j.diamond.2019.02.012 ↗
9. A novel slurry for chemical mechanical polishing of single crystal diamond10.1016/j.apsusc.2021.150431 ↗
10. Tribological behavior of single-crystal diamond in a UV photocatalytic-Fenton composite reaction environment
11. Photo-thermal synergy for boosting photo-Fenton activity with rGO-ZnFe2O4: novel photo-activation process and mechanism toward environment remediation10.1016/j.apcatb.2021.120198 ↗
12. Effect of photo-fenton reaction on chemical mechanical polishing of 6H-SiC
13. A novel visible-light catalyzed assisted single crystal diamond chemical mechanical polishing slurry and polishing mechanism
14. Tribological behavior of polycrystalline diamond based on photo-Fenton reaction10.1016/j.diamond.2023.110430 ↗
15. Chemical-mechanical synergetic effect of single crystal SiC polishing using Fe3O4@MIL-100(Fe) magnetic photo-Fenton catalyst10.1016/j.diamond.2024.111545 ↗
16. Accelerated C-face polishing of silicon carbide by alkaline polishing slurries with Fe3O4 catalysts10.1016/j.jece.2021.106863 ↗
17. Application of the Fenton reaction in silicon carbide polishing and its oxidative active center10.1016/j.ceramint.2024.06.255 ↗
18. Synthesis of a novel heterogeneous fenton catalyst and promote the degradation of methylene blue by fast regeneration of Fe2+10.1016/j.colsurfa.2018.04.009 ↗
19. Promoted electron transfer in Fe2+/Fe3+ co-doped BiVO4/Ag3PO4 S-scheme heterojunction for efficient photo-Fenton oxidation of antibiotics, Sep10.1016/j.seppur.2023.123116 ↗
20. A novel solar photo-Fenton system with self-synthesizing H2O2: enhanced photo-induced catalytic performances and mechanism insights10.1016/j.apsusc.2020.145650 ↗
21. Ultraviolet-irradiated precision polishing of diamond and its related materials10.1016/j.diamond.2013.07.001 ↗
22. Chemical kinetics mechanism for chemical mechanical polishing diamond and its related hard-inert materials10.1007/s00170-017-1336-4 ↗
23. Characterization of Fenton reaction-based material removal on single crystal diamond surface10.1016/j.diamond.2022.109320 ↗
24. The photochemical decomposition of hydrogen peroxide. Quantum yields, tracer and fractionation effects10.1021/ja01143a052 ↗
25. Effect of grain boundary on polycrystalline diamond polishing by high-speed dynamic friction10.1016/j.diamond.2021.108461 ↗
26. Numerical analysis of the strength of polycrystalline diamond as a function of microstructure10.1016/j.ijrmhm.2015.06.004 ↗
27. Polishing and lapping temperatures10.1115/1.2832453 ↗