journal article·2022-09

Biaxial strain tuned electronic structure, lattice thermal conductivity and thermoelectric properties of MgI2 monolayer

Wang-Li Tao, Jun-Qing Lan, Cui-E Hu, Xiang-Rong Chen, Hua-Yun Geng

Publisher page

Abstract

We systematically investigate the effect of strain engineering on the thermodynamic stability, electronic structure, Seebeck coefficient and other properties of two-dimensional (2D) MgI 2 monolayer on the basis of first-principles. The increasing stress causes the maximum phonon frequency of the MgI 2 monolayer to decrease gradually. With the increase of tensile strain, although the indirect-band structure remains the same from the Perdew-Burke-Eruzerhof (PBE) and Heyd-Scuseria-Ernzerhof (HSE06) levels with considering the spin-orbital coupling, the peaks of conduction band and valence band are closer of the MgI 2 monolayer. In the process of tensile strain from 2% to 4%, the number of band valleys increases, and the multiple valley pockets caused by such strain increase the Seebeck coefficient. It is found that the Seebeck coefficient increased from 140.86 μV/K without strain to 231.58 μV/K under 4% tensile strain. It also makes the power factor reach its peak at 4% strain of the MgI 2 monolayer. However, the lattice thermal conductivity of the MgI 2 monolayer is 0.89 W/mK at 300 K in the case of no strain, and it decreases linearly with the increase of tensile strain. The results showed that the ZT value increased gradually with the increasing tensile strain, and it reaches 1.39 at 300 K for the MgI 2 monolayer under the 9% tensile strain. Greatly stimulated further theoretical and experimental research on strain engineering and wish to improve thermoelectric conversion efficiency of two-dimensional (2D) materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 2D Materials and Applications · Advanced Thermoelectric Materials and Devices · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Wearable thermoelectrics for personalized thermoregulation10.1126/sciadv.aaw0536 ↗
2. Thermoelectrics of nanowires10.1021/acs.chemrev.8b00627 ↗
3. Complex electronic structure and compositing effect in high performance thermoelectric BiCuSeO10.1038/s41467-019-10476-7 ↗
4. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
5. Thermoelectric cooling and power generation10.1126/science.285.5428.703 ↗
6. Thermoelectric properties of two-dimensional transition metal dichalcogenides10.1039/C7TC01088E ↗
7. Recent advances in thermoelectric materials10.1016/j.pmatsci.2016.07.002 ↗
8. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
9. Ultrahigh thermoelectric performance by electron and phonon critical scattering in Cu2Se1-xIx10.1002/adma.201302660 ↗
10. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe10.1126/science.aad3749 ↗
11. Copper ion liquid-like thermoelectrics10.1038/nmat3273 ↗
12. Prediction of enhanced thermoelectric performance in two-dimensional black phosphorus nanosheets10.1016/j.vacuum.2020.109790 ↗
13. On the tuning of electrical and thermal transport in thermoelectrics: an integrated theory–experiment perspective10.1038/npjcompumats.2015.15 ↗
14. Thinking like a chemist: intuition in thermoelectric materials10.1002/anie.201508381 ↗
15. Structural, electronic, vibrational, mechanical and thermoelectric properties of 2D and bulk BaX (X=O, S, Se and Te) series under DFT and BTE framework10.1016/j.physe.2020.114523 ↗
16. Strain-dependent electronic and magnetic properties of MoS2 monolayer, bilayer, nanoribbons and nanotubes10.1039/c2cp42181j ↗
17. Transport properties and thermoelectric properties of two-dimensional PtS2 monolayer: first-principle study10.1016/j.physe.2021.114744 ↗
18. Biaxial strain tuned thermoelectric properties in monolayer PtSe210.1039/C6TC03074B ↗
19. Strain-induced enhancement of thermoelectric performance of TiS2 monolayer based on first-principles phonon and electron band structures
20. New directions for low-dimensional thermoelectric materials10.1002/adma.200600527 ↗
21. Enhancement of the thermoelectric properties in nanoscale and nanostructured materials10.1039/C0JM02755C ↗
22. Enhanced thermoelectric properties of penta-graphene by strain effects process10.1088/2053-1591/aa9132 ↗
23. Black phosphorus field-effect transistors10.1038/nnano.2014.35 ↗
24. Anisotropic thermoelectric materials: pentagonal PtM2 (M = S, Se, Te)10.1021/acsami.0c19460 ↗
25. Ultrafast growth of large-area monolayer MoS2 film via gold foil assistant CVD for a highly sensitive photodetector10.1088/1361-6528/aa7473 ↗
26. Emerging two-dimensional monoelemental materials (Xenes) for biomedical applications10.1039/C8CS00823J ↗
27. Buckled two-dimensional Xene sheets10.1038/nmat4802 ↗
28. Recent progress in the fabrication, properties, and devices of heterostructures based on 2D materials10.1007/s40820-019-0245-5 ↗
29. GeI2 monolayer: a model thermoelectric material from 300 to 600 K10.1080/14786435.2019.1699670 ↗
30. Low-temperature thermoelectric behavior and impressive optoelectronic properties of two-dimensional XI2 (X = Sn, Si): a first principle study10.1016/j.commatsci.2020.109977 ↗
31. High thermoelectric efficiency in monolayer PbI2 from 300 K to 900 K10.1039/C8QI01297K ↗
32. 2D MgF2 nanosheet as a promising candidate for thermoelectric material10.1016/j.matpr.2020.10.643 ↗
33. Reducing Mg anode overpotential via ion conductive surface layer formation by iodine additive10.1002/aenm.201802041 ↗
34. Enhanced thermoelectric performance of phosphorene by strain-induced band convergence10.1103/PhysRevB.90.085433 ↗
35. Strain-modulated electronic and thermal transport properties of two-dimensional O-silica10.1088/0957-4484/27/26/265706 ↗
36. Compressive strain induced enhancement in thermoelectric -power-factor in monolayer MoS2 nanosheet10.1088/1361-648X/aa6cbc ↗
37. Thermoelectric performance of monolayer InSe improved by convergence of multivalley bands
38. Designing chemical analogs to PbTe with intrinsic high band degeneracy and low lattice thermal conductivity10.1038/s41467-019-08542-1 ↗
39. Advanced materials for high-temperature thermal transport10.1002/adfm.201904815 ↗
40. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
41. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
42. Norm-conserving and ultrasoft pseudopotentials for first-row and transition elements10.1088/0953-8984/6/40/015 ↗
43. Density functional theory of atoms and molecules
44. Density-functional theory of the band gap10.1103/PhysRevB.32.3883 ↗
45. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
46. Phonons and related crystal properties from density-functional perturbation theory10.1103/RevModPhys.73.515 ↗
47. First principles phonon calculations in materials science10.1016/j.scriptamat.2015.07.021 ↗
48. Intrinsic lattice thermal conductivity of semiconductors from first principles10.1063/1.2822891 ↗
49. BoltzTraP2, a program for interpolating band structures and calculating semi-classical transport coefficients10.1016/j.cpc.2018.05.010 ↗
50. A class of monolayer metal halogenides MX2: electronic structures and band alignments10.1063/1.4945366 ↗
51. Dynamical theory of crystal lattices10.1119/1.1934059 ↗
52. Crystal instabilities at finite strain10.1103/PhysRevLett.71.4182 ↗
53. Charting the complete elastic properties of inorganic crystalline compounds10.1038/sdata.2015.9 ↗
54. Electro-mechanical anisotropy of phosphorene10.1039/C5NR00355E ↗
55. Elastic properties of hydrogenated graphene10.1103/PhysRevB.82.235414 ↗
56. Novel two-dimensional silicon dioxide with in-plane negative Poisson's ratio10.1021/acs.nanolett.6b03921 ↗
57. Mechanical and thermal transport properties of monolayer PbI2 via first-principles investigations10.1080/14786435.2019.1580818 ↗
58. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
59. Phonon thermal transport in strained and unstrained graphene from first principles10.1103/PhysRevB.89.155426 ↗
60. Thermal conductivity of monolayer MoS2, MoSe2, and WS2: interplay of mass effect, interatomic bonding and anharmonicity10.1039/C5RA19747C ↗
61. Phonon transport in single-layer transition metal dichalcogenides: a first-principles study10.1063/1.4896685 ↗
62. Thermoelectric response of bulk and monolayer MoSe2 and WSe210.1021/cm504244b ↗
63. Phonon transport properties of two-dimensional group-IV materials from ab initio calculations10.1103/PhysRevB.94.245420 ↗
64. Ab initio thermal transport in compound semiconductors10.1103/PhysRevB.87.165201 ↗
65. Three-phonon phase space and lattice thermal conductivity in semiconductors10.1088/0953-8984/20/16/165209 ↗
66. Thermal conductivity of compound semiconductors: interplay of mass density and acoustic-optical phonon frequency gap10.1063/1.4893185 ↗
67. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
68. Superhigh flexibility and out-of-plane piezoelectricity together with strong anharmonic phonon scattering induced extremely low lattice thermal conductivity in hexagonal buckled CdX (X = S, Se) monolayers10.1088/1361-648X/ab8d73 ↗
69. Superhigh flexibility and out-of-plane piezoelectricity together with strong anharmonic phonon scattering induced extremely low lattice thermal conductivity in hexagonal buckled CdX (X = S, Se) monolayers10.1088/1361-648X/ab8d73 ↗
70. Dresselhaus · 1997 · 12
71. Exceptional thermoelectric properties of layered GeAs210.1021/acs.chemmater.7b03279 ↗
72. Titanium trisulfide monolayer as a potential thermoelectric material: a first-principles-based Boltzmann transport study10.1021/acsami.6b14134 ↗
73. Chemical intuition for high thermoelectric performance in monolayer black phosphorus, α-arsenene and aW-antimonene10.1039/C7TA09480A ↗
74. Penta-PdX2 (X = S, Se, Te) monolayers: promising anisotropic thermoelectric materials10.1039/C9TA02138H ↗
75. Thermoelectric properties of Janus MXY (M = Pd, Pt; X, Y = S, Se, Te) transition-metal dichalcogenide monolayers from first principles10.1063/1.5130741 ↗
76. Non-linear enhancement of thermoelectric performance of a TiSe2 monolayer due to tensile strain, from first-principles calculations10.1039/C9TC00183B ↗
77. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
78. The effects of oxidation on the electronic, thermal and mechanical properties of antimonene: first-principles study10.1016/j.cplett.2018.11.013 ↗
79. Phonon transport in Janus monolayer MoSSe: a first-principles study10.1039/C8CP00350E ↗
80. Electronic properties of polymorphic two-dimensional layered chromium disulphide10.1039/C9NR04449C ↗
81. Insights into CrS2 monolayer and n-CrS2/p-HfN2 interface for low-power digital and analog nanoelectronics10.1016/j.apsusc.2021.152211 ↗
82. Approximate calculation of the anisotropy of the relaxation time of the conduction electrons in the noble metals10.1103/PhysRev.121.1320 ↗
83. First-principles study of intrinsic phononic thermal transport in monolayer C3N10.1016/j.physe.2018.02.012 ↗
84. Effect of biaxial strain on thermal transport in WS2 monolayer from first principles calculations10.1016/j.physe.2020.114312 ↗