journal article·2024-11

Modulation of ultrafast laser-induced modified structure inside silicon carbide for thin wafer dicing

Yubiao Zhou, Fu Liu, Shiyu Cao, Renchao Liang, Yi Zhang

Publisher page

Abstract

Effective modulation of the internal modification structure is critical for enhancing the quality and efficiency of ultrafast laser dicing in SiC wafer. This paper achieves modulation of the height and width of the modified layer by changing the pulse width and pulse interval. Based on dark-field imaging method, the morphology of the modified layer after laser scanning is non-destructively detected. Transformation of nonlinear absorption modes and heightened thermal effects lead to a stepwise increase in the width of the modified layer. The width of the modified layer with incubation effect is bigger than the width of the modified region with a single pulse of laser action. The height of the modified layer can be significantly increased by multi-focusing, the strength of plasma defocusing determines both the distance between focus points and the total number of focus points. The generation of transverse cracks is determined by the laser pulse width and modification overlap ratio, and transverse cracks are not produced when the laser pulse width is ≤ 2 ps. The sub-picosecond laser monofocal modification dicing process achieves high-quality dicing, the multi-focused laser modification dicing process with pulse widths in the tens of picoseconds range achieves high-efficiency dicing. This study provides a reference for thin SiC wafer dicing and ingot laser slicing.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Advanced Surface Polishing Techniques · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Femtosecond laser modification of silicon carbide substrates and its influence on CMP process10.1016/j.ceramint.2021.01.188 ↗
2. The effect of spot overlap ratio on femtosecond laser planarization processing of SiC ceramics10.1016/j.optlastec.2020.106270 ↗
3. Ultra-thin wafer technology and applications: a review10.1016/j.mssp.2019.104681 ↗
4. Multi beam full cut dicing of thin Si IC wafers
5. Laser slicing of 4H-SiC wafers based on picosecond laser-induced micro-explosion via multiphoton processes10.1016/j.optlastec.2022.108323 ↗
6. An investigation of recast behavior in laser ablation of 4H-silicon carbide wafer10.1016/j.mssp.2019.104701 ↗
7. Femtosecond laser single step, full depth cutting of thick silicon sheets with low surface roughness10.1016/j.optlastec.2020.106899 ↗
8. Laser cutting silicon-glass double layer wafer with laser induced thermal-crack propagation10.1016/j.optlaseng.2016.02.020 ↗
9. Dual-beam stealth laser dicing based on electrically tunable lens10.1016/j.precisioneng.2020.08.009 ↗
10. In-chip microstructures and photonic devices fabricated by nonlinear laser lithography deep inside silicon10.1038/s41566-017-0004-4 ↗
11. Development of a selective wet-chemical etchant for precise 3D sculpting of silicon enabled by infrared non-linear laser modification10.1016/j.optlastec.2024.111022 ↗
12. Veiko · 2010
13. Controllable laser thermal cleavage of sapphire wafers10.1016/j.optlaseng.2017.10.012 ↗
14. Stealth dicing of sapphire wafers with near infra-red femtosecond pulses10.1007/s00339-017-0927-0 ↗
15. Ultrafast pulsed laser stealth dicing of 4H-SiC wafer: structure evolution and defect generation10.1016/j.jmapro.2022.06.064 ↗
16. Review of laser microscale processing of silicon carbide10.2351/1.3562522 ↗
17. Femtosecond laser micromachining in transparent materials10.1038/nphoton.2008.47 ↗
18. Low surface damage laser processing of silicon by laser-induced plasma etching (LIPE)10.1016/j.apsusc.2022.153712 ↗
19. Precision layered stealth dicing of SiC wafers by ultrafast lasers10.3390/mi13071011 ↗
20. Process mechanism of ultrafast laser multi-focal-scribing for ultrafine and efficient stealth dicing of SiC wafers10.1007/s00339-022-06012-y ↗
21. Internal modified structure of silicon carbide prepared by ultrafast laser for wafer slicing10.1016/j.ceramint.2022.10.043 ↗
22. 4H-SiC wafer slicing by using femtosecond laser double-pulses10.1364/OME.7.002450 ↗
23. Dual laser beam asynchronous dicing of 4H-SiC wafer10.3390/mi12111331 ↗
24. Investigation on the processing quality of nanosecond laser stealth dicing for 4H-SiC wafer10.1149/2162-8777/acc135 ↗
25. High-aspect ratio nanochannel formation by single femtosecond laser pulses10.1364/OE.18.016840 ↗
26. Study on picosecond laser stealth dicing of 4H-SiC along [112‾0] and [11‾00] crystal orientations on Si-face and C-face10.1016/j.optlastec.2023.109300 ↗
27. Formation of periodic strained layers associated with nanovoids inside a silicon carbide single crystal induced by femtosecond laser irradiation10.1063/1.3211311 ↗
28. Femtosecond laser three-dimensional micro- and nanofabrication10.1063/1.4904320 ↗
29. Self-focusing: theory10.1016/0079-6727(75)90003-8 ↗
30. Dispersion of nonresonant third-order nonlinearities in Silicon Carbide10.1038/srep40924 ↗