Effect of interlayer thickness on electrochemical properties and corrosion resistance of sputtered TiNxnm/Tixnm multilayer thin films
Source abstract
Abstract
Three multilayers [TiN xnm/Ti xnm /p-type Si (100)] (x = 2.5, 5, 10) were fabricated using a dc-magnetron sputtering to evaluate surface and interfacial effect on electrochemical properties for possible application in supercapacitor electrode materials. The (111) and (101) planes of TiN and Ti were observed at 36.50° and 40.19° respectively. TA, LA, and TO phonon modes were found at 254.12, 306.15, and 637.94 cm −1 , respectively. The defect state distribution of Ti, N, and O was investigated from PL. XPS confirmed the Ti at. % of TiN xnm/Ti xnm multilayers decreased from 43.07 to 12.04 and N at. % increased from 42.79 to 72.53 % as the x value decreased from 10 nm to 2.5 nm. The areal specific capacitance (C a ) and energy density (E) of the TiN xnm/Ti xnm multilayer electrode increased with decreasing multilayer thickness. E varied from 0.27 to 1.37 mWhcm −2 and the power density (P) from 5.04 to 25.4 mWcm −2 for the multilayers. The diffusion coefficient (D) and total accumulated charge (Q in) decreased from 6.48 × 10 −17 to 1.56 × 10 −18 cm 2/s and 1.82 to 1.64 C/cm 2, respectively, for TiN xnm/Ti xnm multilayers. The capacitive contribution was the highest in x = 10 (2.181 Av −1s). However, the diffusion-limited contribution was maximum in x = 5 (3.541 Av −1/2s 1/2). The cyclic stability maintained at 85.4 % capacitive retention over 1000 cycles and the expansive potential window (up to 0.8 V in 1 M H 2SO 4 ) makes the multilayer thin films ideal for supercapacitor electrodes. Among all the samples, the TiN 2.5nm/Ti 2.5nm exhibited the highest C a , E, and diffusion coefficient, originating from the smaller layer thickness, leading to more ohmic conductivity and facilitating the supercapacitive performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Advanced materials for energy storage10.1002/adma.200903328 ↗
2. Seed-induced NiCo2S4 nanosheets with integral ultrafine nanocrystals for efficient supercapacitors10.1016/j.vacuum.2020.109618 ↗
3. Highly conductive electrospun carbon nanofiber/MnO 2 coaxial nano-cables for high energy and power density supercapacitors10.1016/j.jpowsour.2012.02.048 ↗
4. Rational design of carbon shell endows TiN@C nanotube based fiber supercapacitors with significantly enhanced mechanical stability and electrochemical performance10.1016/j.nanoen.2016.11.052 ↗
5. Guiding the deposition flux in an ionized magnetron discharge10.1016/j.tsf.2006.07.183 ↗
6. A multifunctional TiN/Ni electrode for wearable supercapacitor and sensor with an insight into charge storage mechanism10.1016/j.apsusc.2021.149718 ↗
7. Period dependence of hardness and microstructure on nanometric Cr/CrN multilayers10.1016/j.surfcoat.2004.08.058 ↗
8. Sputtered titanium nitride films with finely tailored surface activity and porosity for high performance on-chip micro-supercapacitors10.1016/j.jpowsour.2020.229406 ↗
9. Electrochemical capacitance of polypyrrole-titanium nitride and polypyrrole-titania nanotube hybrids10.1039/c3nj01286g ↗
10. Coaxial PANI/TiN/PANI nanotube arrays for high-performance supercapacitor electrodes
11. Hierarchical TiN nanoparticles-assembled nanopillars for flexible supercapacitors with high volumetric capacitance10.1039/C8NR01485J ↗
12. Effect of oxidative surface treatments on charge storage at titanium nitride surfaces for supercapacitor applications10.1039/C6TA08308K ↗
13. Study on capacitance properties of the sputtered carbon doped titanium nitride electrode material for supercapacitor10.1016/j.vacuum.2022.110893 ↗
14. Investigation of interfacial and interdiffusion study of Ti2N MXene phase from TiN/Ti multilayers10.1016/j.tsf.2023.139969 ↗
15. Comparative assessment and experimental analysis of atomic coordination and mechanical properties of sputter deposited Ti-rich TiN, TiC, and TiCN thin films10.1016/j.jallcom.2024.175217 ↗
16. Defect chemistry and defect engineering of TiO2-based semiconductors for solar energy conversion10.1039/C4CS00469H ↗
17. Influence of substrate bias on the structure and properties of TiCN films deposited by radio-frequency magnetron sputtering10.1016/j.tsf.2016.08.047 ↗
18. Investigation over effect of different carbon content on various properties of titanium carbon nitride (TiCN) coating grown on Si (100) substrate by chemical vapor deposition (CVD) process
19. First-order Raman line intensity ratio in GaAs: a potential lattice perfection scale10.1088/0022-3719/16/6/019 ↗
20. Investigation of structural network and mechanical properties of Titanium silicon nitride (TiSiN) thin films10.1016/j.jallcom.2017.09.340 ↗
21. Sensitivity factors for XPS analysis of surface atoms10.1016/0368-2048(83)85087-7 ↗
22. Development and supercapacitor application of ionic liquid-incorporated gel polymer electrolyte films10.1016/j.jiec.2017.10.009 ↗
23. Novel three-dimensional electrodes: electrochemical properties of carbon nanotube ensembles10.1021/jp021201n ↗
24. Two-Dimensional double hydroxide nanoarchitecture with high areal and volumetric capacitance10.1021/acsomega.8b00596 ↗
25. High-performance supercapacitor electrode based on cobalt oxide-manganese dioxide-nickel oxide ternary 1D hybrid nanotubes10.1021/acsami.6b05933 ↗
26. Layered assembly of graphene oxide and Co–Al layered double hydroxide nanosheets as electrode materials for supercapacitors
27. Structural, optical, thermal and electrochemical properties of rGO/PEDOT:PSS/PVP composite for supercapacitor electrode application10.1007/s00339-022-05556-3 ↗
28. Linear and non-linear pseudocapacitances with or without diffusion control10.1016/j.pnsc.2021.10.011 ↗
29. Highly stable and efficient performance of binder-free symmetric supercapacitor fabricated with electroactive polymer synthesized via interfacial polymerization10.3390/ma12101626 ↗
30. Highly ordered mesoporous CuCo2O4 nanowires, a promising solution for high-performance supercapacitors10.1021/acs.chemmater.5b00706 ↗
31. Green synthesis and electrochemical characterization of rGO–CuO nanocomposites for supercapacitor applications10.1007/s11581-016-1923-7 ↗
32. Nitrogen doped graphene/CuCr2O4 nanocomposites for supercapacitors application: effect of nitrogen doping on coulombic efficiency10.1016/j.electacta.2019.135368 ↗
33. Ti2NTx MXene/rGO nanocomposites: optical tunning, functional bonding and electrochemical analysis for supercapacitor electrode application10.1016/j.apsusc.2024.160403 ↗
34. Electrochemical capacitance performance of titanium nitride nanoarray10.1016/j.mseb.2013.09.005 ↗
35. Role of nitrogen doping at the surface of titanium nitride thin films towards capacitive charge storage enhancement10.1016/j.jpowsour.2017.05.074 ↗
36. Electrochemical capacitance of titanium nitride modified lithium titanate nanotube array10.1016/j.jallcom.2017.05.179 ↗
37. Capacitive performance of molybdenum nitride/titanium nitride nanotube array for supercapacitor10.1016/j.mseb.2016.11.005 ↗
38. Enhanced electrochemical performance of polyaniline/carbon/titanium nitride nanowire array for flexible supercapacitor10.1016/j.jpowsour.2015.04.025 ↗
39. Tunable preparation of chrysanthemum-like titanium nitride as flexible electrode materials for ultrafast-charging/discharging and excellent stable supercapacitors10.1016/j.jpowsour.2018.06.033 ↗
40. Electrochemical double-layer capacitance of MoS2 nanowall films10.1149/1.2778851 ↗
41. Electrochemical characteristics and impedance spectroscopy studies of carbon-carbon supercapacitors10.1149/1.1543948 ↗
42. Electric double layer capacitors for ac filtering made from vertically oriented graphene nanosheets on aluminum10.1016/j.carbon.2016.09.080 ↗
43. One-step fabrication and capacitive behavior of electrochemical double layer capacitor electrodes using vertically-oriented graphene directly grown on metal10.1016/j.carbon.2012.05.014 ↗
44. Novel π-conjugated iron oxide/reduced graphene oxide nanocomposites for high performance electrochemical supercapacitors10.1039/C6RA25630A ↗
45. Biocompatible synthesis of rGO from ginger extract as a green reducing agent and its supercapacitor application10.1007/s12034-020-02318-w ↗
46. Use of Electrochemical Impedance Spectroscopy (EIS) to monitoring the corrosion of reinforced concrete10.1590/S1983-41952015000400007 ↗
47. Intercalation mechanism of lithium ions into graphite layers studied by nuclear magnetic resonance and impedance experiments10.1149/1.1345870 ↗
48. Electrochemical capacitors based on graphene oxide sheets using different aqueous electrolytes10.1021/jp2032687 ↗
49. Determination of chloride diffusivity in concrete by AC impedance spectroscopy10.1016/S0008-8846(99)00079-4 ↗
50. Electrochemical, bonding network and electrical properties of reduced graphene oxide-Fe2O3 nanocomposite for supercapacitor electrodes applications10.1016/j.jallcom.2019.04.004 ↗
51. Work-function-tuned TiN metal gate FDSOI transistors for subthreshold operation10.1109/TED.2010.2092779 ↗
52. Electrical and optical properties of TiN thin films10.1134/S0020168514010178 ↗
53. Defining the transfer coefficient in electrochemistry: an assessment (IUPAC Technical Report)10.1515/pac-2014-5026 ↗
54. SE fields
55. Understanding the Role of Complexation in the Charge-Transfer Kinetics of the Cu 2+ + e ↔ Cu 1+ Redox Reaction in Ethaline Deep Eutectic Solvent10.1149/2.1211915jes ↗