Development of Highly stable ceria slurry in acetic acid-ammonium acetate buffer Media for effective chemical mechanical polishing of silicon dioxide
Source abstract
Abstract
Shallow trench isolation (STI), as a key technology for device isolation, is commonly planarized with ceria slurry in chemical mechanical polishing (CMP). Due to the ceria particles are easily agglomerated, the stability of ceria slurry is still a key issue at present. In order to obtain excellent polishing performance for dielectric, it is necessary to prepare the ceria slurry with stable dispersion. This paper is to propose a new dispersant based on acetic acid that can improve the stability of ceria slurry. By comparing the dispersibility of acetic acid with that of a formulated acetic acid-ammonium acetate buffer solution, the buffer solution was chosen as more effective dispersant. The addition of buffer solution was more beneficial for the stability of the slurry. After 7 days, the zeta potential of ceria decreased from 46.47 mV to 35.01 mV (decreased about 24.6%) with the addition of acetic acid, whereas it decreased from 51.22 mV to 42.19 mV (decreased about 17.6%) with the addition of buffer solution. Furthermore, during the CMP process, the removal rate of TEOS was improved (from 621.59 nm/min to 694.77 nm/min) along with surface roughness (Ra, from 0.37 nm to 0.07 nm). The mechanism was characterized using X-ray photoelectron spectroscopy (XPS), UV–vis spectrometer (UV–Vis), and molecular dynamic simulation. The buffer solution increased the concentration of acetate ions in the slurry, which not only enhanced the adsorption between acetate ions and ceria but also promoted the generation of Ce 3+ and oxygen vacancy. Furthermore, the free electrons of Ce 3+ facilitated the breaking of the Si– O –Si bonds through electron transfer, increasing the removal rate of silicon dioxide.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Li
2. Chemical mechanical planarization for microelectronics applications10.1016/j.mser.2004.06.002 ↗
3. Cleaning solutions for removal of ∼30 nm ceria particles from proline and citric acid containing slurries deposited on silicon dioxide and silicon nitride surfaces10.1149/2162-8777/ab8ffa ↗
4. Role of slurry additives on chemical mechanical planarization of silicon dioxide film in colloidal silica based slurry10.1149/2162-8777/ac3e44 ↗
5. Mechanism of Co liner as enhancement layer for Cu interconnect gap-fill10.1149/2.009312jes ↗
6. The effect of Ceria abrasive size on dishing and step height reduction of silicon oxide film in STI–CMP10.1016/j.surfcoat.2005.08.047 ↗
7. A novel green chemical mechanical polishing for potassium dihydrogen phosphate using corn oil slurry
8. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
9. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
10. A novel slurry for chemical mechanical polishing of single crystal diamond10.1016/j.apsusc.2021.150431 ↗
11. Novel rotary chemical mechanical polishing on an integral impeller10.1016/j.jmapro.2021.04.010 ↗
12. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
13. Mechanism of polishing of SiO2 films by Ceria particles10.1016/S0022-3093(01)00364-7 ↗
14. Chemical processes in glass polishing10.1016/0022-3093(90)90200-6 ↗
15. Effect of slurry particles on PVA brush contamination during post-CMP cleaning10.1016/j.mssp.2022.107043 ↗
16. Effect of ammonium halide salts on wet chemical nanoscale etching and polishing of InGaAs surfaces for advanced CMOS devices10.1016/j.mssp.2023.107469 ↗
17. On chemo-mechanical polishing (CMP) of silicon nitride (Si3N4) workmaterial with various abrasives10.1016/S0043-1648(98)00245-2 ↗
18. Use of anionic surfactants for selective polishing of silicon dioxide over silicon nitride films using colloidal silica-based slurries10.1016/j.apsusc.2013.07.057 ↗
19. Polishing behaviors of ceria abrasives on silicon dioxide and silicon nitride CMP10.1016/j.powtec.2010.09.025 ↗
20. Increase in the adsorption density of anionic molecules on ceria for defect-free STI CMP10.1149/1.3251009 ↗
21. Surfactant effect on oxide-to-nitride removal selectivity of nano-abrasive ceria slurry for chemical mechanical polishing10.1143/JJAP.42.5420 ↗
22. Multiselectivity chemical mechanical polishing for NAND flash memories beyond 32 nm10.1149/1.3368675 ↗
23. Chemical-mechanical dispersing behavior of a nanoceria abrasive10.1016/S1002-0721(10)60310-9 ↗
24. Adsorption behavior of anionic polyelectrolyte for chemical mechanical polishing (CMP)10.1016/j.jcis.2007.11.004 ↗
25. Influence of anionic polyelectrolyte addition on ceria dispersion behavior for quartz chemical mechanical polishing10.1016/j.colsurfa.2012.07.009 ↗
26. Preparation of surface modified ceria nanoparticles as abrasives for the application of chemical mechanical polishing (CMP)10.1149/2162-8777/ab7098 ↗
27. Research on preparation of ceria polishing slurry with high dispersion stability and its polishing performance
28. Effect of citric acid on the dispersion stability and polishing performance of ceria abrasive
29. Atomic-level wear behavior of sliding between silica (010) surfaces10.1016/j.apsusc.2017.07.055 ↗
30. Improving the dispersion stability and chemical mechanical polishing performance of ceria slurries10.1149/2162-8777/accaa5 ↗
31. Study of dispersion mechanisms of modified SiC powder: electrostatic repulsion and steric hindrance mechanism10.1039/C9NJ02131K ↗
32. Structural, optical and magnetic properties of Fe-doped Ceria samples probed using X-ray photoelectron spectroscopy10.1007/s10854-018-9060-x ↗
33. Meso-silica/Erbium-doped ceria binary particles as functionalized abrasives for photochemical mechanical polishing (PCMP)10.1016/j.apsusc.2021.149353 ↗
34. Ceria and Ceria-based nanomaterials for photocatalytic, antioxidant and antimicrobial activities10.1016/j.jre.2022.09.003 ↗
35. Role of the oxidation state of cerium on the ceria surfaces for silicate adsorption10.1016/j.apsusc.2016.06.193 ↗
36. Facile synthesis of nanoceria by a molten hydroxide method and its photocatalytic properties10.1016/j.jre.2019.11.007 ↗
37. Role of oxygen vacancies in photocatalytic water oxidation on ceria oxide: experiment and DFT studies10.1016/j.apcatb.2017.10.049 ↗
38. Effect of Ceria on carbon deposition resistance of Ni/Ceria catalyst supported on SiC porous ceramic for ethanol steam reforming10.1016/j.jre.2022.09.006 ↗
39. Performance characterization of cerium oxide abrasives for chemical-mechanical polishing of glass, mach
40. Abrasive and additive interactions in high selectivity STI CMP slurries10.1016/j.mee.2013.10.004 ↗
41. Role of different additives on silicon dioxide film removal rate during chemical mechanical polishing using ceria-based dispersions10.1149/1.3457387 ↗
42. Effect of corrosion inhibitor BTA on silica particles and their adsorption on copper surface in copper interconnection CMP10.1149/2162-8777/ac627c ↗
43. Surface chemistry of nanometric ceria particles in aqueous dispersions10.1006/jcis.1993.1417 ↗
44. Effect of pH and ionic strength on chemical mechanical polishing of tantalum10.1149/1.1391010 ↗