journal article·2024-09

Synthesis, characterization, and synergistic effects of CuS/MnO2 nanocomposite electrodes for high-performance supercapacitors

Sreenivasa Kumar Godlaveeti, Sai Kumar Arla, Aboud A.A. Bahajjaj, Jong Su Kim, Sang Woo Joo, Ramamanohar Reddy Nagireddy

Publisher page

Abstract

Metal oxides, metal sulfides, and their derivatives exhibit impressive electrochemical capabilities, offering potential for the creation of novel electrodes with superior performance in supercapacitors. In this study, we introduce a novel binary composite consisting of copper sulfide and manganese oxide (CuS/MnO 2). This composite is designed with specific CuS and MnO 2 ratios (80 % and 20 %, respectively) to explore their electrochemical behavior and optimize the performance of these nanostructures. According to morphological and structural analysis, it was observed that the synthesis process yielded high-purity nanoparticles and nanorods of CuS and MnO 2. Notably, no byproducts were detected, indicating a successful synthesis process. Through a rapid pseudocapacitive charge storage mechanism, the electrochemical investigations reveal that all electrodes in a three-electrode setup tested in 3 M KOH electrolyte solution and the novel CuS/MnO 2 electrode exhibit typical capacitive behavior in the potential of 0.0–0.5 V, with good reversibility and charge storage properties (specific capacitance: 451 F g −1, low resistance: 1.21 Ω, cyclic stability: 98.33 % at 4 A g −1 continuously 2000 cycles). Surprisingly, the CuS/MnO 2 nanocomposite (NC) exposed high power density is about 1997 W kg −1 and a maximum energy density of 28.19 W h kg −1exceptionally is achieved. The significance of additional transition metal oxide-based electrodes in achieving noticeably better performance is demonstrated by these results.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Synthesis of nanostructured metal sulfides via a hydrothermal method and their use as an electrode material for supercapacitors10.1039/C8NJ04358B ↗
2. Hydrogen energy storage integrated battery and supercapacitor based hybrid power system: a statistical analysis towards future research directions10.1016/j.ijhydene.2022.09.099 ↗
3. Nanosheet-assembled porous MnCo2O4.5 microflowers as electrode material for hybrid supercapacitors and lithium-ion batteries10.1016/j.jcis.2022.07.105 ↗
4. Porous MgCo2O4 nanoflakes serve as electrode materials for hybrid supercapacitors with excellent performance10.1016/j.jcis.2022.06.098 ↗
5. Metal-organic frameworks as highly efficient electrodes for long cycling stability supercapacitors10.1016/j.ijhydene.2021.03.003 ↗
6. TiO2 nanorods decorated on RGO sheet for an excellent energy storage performance10.1016/j.ijhydene.2022.03.071 ↗
7. A comprehensive review on supercapacitor applications and developments10.3390/en15030674 ↗
8. Porous CuCo2O4/CuO microspheres and nanosheets as cathode materials for advanced hybrid supercapacitors10.1016/j.est.2023.107875 ↗
9. Porous CuCo2O4 microtubes as a promising battery-type electrode material for high-performance hybrid supercapacitors10.1016/j.jmat.2021.03.011 ↗
10. Facile hydrothermal synthesis of ternary CeO2-SnO2/rGO nanocomposite for supercapacitor application10.1142/S1793604720510054 ↗
11. Efficient electrochemical performance of the RGO/SrO nanorods prepared by the hydrothermal method10.1007/s00339-023-06610-4 ↗
12. Different phase and morphology of the MnO2 on various substrates and electrolytes for electrochemical performance10.1007/s10876-023-02421-y ↗
13. Facile ZnO-based nanomaterial and its fabrication as a supercapacitor electrode: synthesis, characterization and electrochemical studies10.1039/D1RA04341B ↗
14. Different phase and morphology effect of manganese oxide on electrochemical performance for supercapacitor application10.1007/s10876-020-01833-4 ↗
15. Electrochemical performance comparison study of ternary RGO/β-Ni(OH)2-CeO2 nanocomposite prepared from hydrothermal and solid-state methods for supercapacitors10.1088/2043-6262/abebd5 ↗
16. Recent studies on polymeric materials for supercapacitor development10.1016/j.est.2022.104149 ↗
17. Revealing the reason for the unsuccessful fabrication of Li3Zr2Si2PO12 by solid state reaction10.1016/j.cjsc.2023.100108 ↗
18. Trajectory-battery integrated design and its application to orbital maneuvers with electric pump-fed engines10.1016/j.asr.2022.05.014 ↗
19. Facile synthesis of nanosphere like rare-earth/transition metal dual-doped TiO2 nanostructure for application as supercapacitor electrodes material10.1007/s10853-022-07390-7 ↗
20. Highly efficient tri-phase TiO2–Y2O3–V2O5 nanocomposite: structural, optical, photocatalyst, and antibacterial studies10.1007/s40097-021-00430-9 ↗
21. Superior electrochemical performance of neodymium oxide-based Nd2CeMO3 (M = Er, Sm, V) nanostructures for supercapacitor application10.1016/j.jelechem.2022.116614 ↗
22. PbS nanoparticles anchored 1D- CdSe nanowires: core-shell design towards energy storage supercapacitor application10.1016/j.jallcom.2022.164323 ↗
23. First report on a FeS-based 2 V operating flexible solid-state symmetric supercapacitor device10.1039/C7SE00165G ↗
24. Pseudocapacitive behavior of unidirectional CdS nanoforest in 3D architecture through solution chemistry10.1016/j.cplett.2016.07.008 ↗
25. Effect of cold-spray parameters on surface roughness, thickness and adhesion of copper-based composite coating on aluminum alloy 6061 T6 substrate10.3390/pr11030959 ↗
26. Conversion of dielectric surface effect into volume effect for high output energy10.1002/adma.202302954 ↗
27. Excellent-moisture-resistance fluorinated polyimide composite film and self-powered acoustic sensing10.1021/acsami.3c05154 ↗
28. A novel aluminum–graphite dual-ion battery10.1002/aenm.201670064 ↗
29. Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage10.1038/s41557-018-0045-4 ↗
30. High-performance of the ZnO/NiS nanocomposite electrode materials for supercapacitor10.1016/j.colsurfa.2023.132749 ↗
31. Synthesis of CNTs on ZnO/NiS composite as an advanced electrode material for high-performance supercapacitors10.1016/j.est.2020.101199 ↗
32. Enhanced photocatalytic performance of NiS/ZnO nanocomposite for the remediation of PNP and RhB dye10.1016/j.jece.2022.107459 ↗
33. A practical perspective for chromatic orthogonality for implementing in photolithography10.1038/s41598-023-27869-w ↗
34. One-pot preparation of CoS/CuS nanocomposite-sensitized TiO2 nanorod arrays with enhanced photoelectrochemical performance10.1149/1945-7111/ac7ae0 ↗
35. Photo-sensitive CuS/NiO heterostructure electrocatalysts for energy-saving hydrogen evolution reaction at all pH conditions10.1016/j.ijhydene.2023.06.014 ↗
36. Flower petal-like CuS-CuO/G-C3N4 nanocomposite for high efficiency supercapacitors10.3390/coatings12121834 ↗
37. A novel high performance flexible supercapacitor based on porous carbonized cotton/ZnO nanoparticle/CuS micro-sphere10.1016/j.colsurfa.2019.124025 ↗
38. Development of CuO/CuS/MnO2 ternary nanocomposite for visible light-induced photocatalytic degradation of methylene blue10.1007/s41204-022-00266-w ↗
39. Fabrication and characterization of high photosensitivity CuS/porous silicon heterojunction photodetector10.1016/j.ijleo.2020.165339 ↗
40. Tunable construction of CuS nanosheets@flower-like ZnCo-layered double hydroxide nanostructures for hybrid supercapacitors10.1039/D3IM00027C ↗
41. Hydrothermal synthesis of Se-doped CuS quantum dots with respect to the DW/EN solvent ratio and application as a counter electrode for quantum dot-sensitized solar cells10.1007/s13538-022-01215-3 ↗
42. Recent advances in 2D/nanostructured metal sulfide-based gas sensors: mechanisms, applications, and perspectives10.1039/D0TA08190F ↗
43. Copper sulfide nanostructures: synthesis and biological applications10.1039/D1RA08414C ↗
44. CuS-based nanostructures as catalysts for organic pollutants photodegradation10.3390/catal12101135 ↗
45. CuS/GO composite for high performance Lithium ion storage
46. Microwave-hydrothermal synthesis of copper sulphide nanorods embedded on graphene sheets as an efficient electrocatalyst for excellent hydrogen evolution reaction10.1016/j.fuel.2021.120143 ↗
47. Comparative study between pure and manganese doped copper sulphide (CuS) nanoparticles10.1088/2632-959X/abdc0d ↗
48. Enhanced supercapacitor performance and electromagnetic interference shielding effectiveness of CuS quantum dots grown on reduced graphene oxide sheets10.1021/acsomega.0c05034 ↗
49. Boosting the electrochemical performance of ZnO nanomaterials through a conductive CuS matrix for aqueous supercapacitors10.1039/D2NJ05744A ↗
50. In situ anchoring CuS nanoparticles on vertical aligned graphene nanosheets supported on carbon cloth for high-performance supercapacitors10.1016/j.jelechem.2022.117033 ↗
51. High electrochemical performance of rGO anchored CuS nanospheres for supercapacitor applications10.1016/j.est.2020.102001 ↗
52. Flexible asymmetric solid-state supercapacitors by highly efficient 3D nanostructured α-MnO2 and h-CuS electrodes10.1021/acsami.8b03690 ↗
53. Hierarchical, porous CuS microspheres integrated with carbon nanotubes for high-performance supercapacitors10.1038/srep16584 ↗
54. The electrochemical energy storage and photocatalytic performances analysis of rare earth metal (Tb and Y) doped SnO2@CuS composites10.1016/j.apt.2022.103442 ↗
55. Exploring the functional properties of CuCo2O4/CuS nanocomposite as improved material for supercapacitor electrode10.1016/j.jmrt.2020.12.083 ↗
56. Binder-free CuS/ZnS/sodium alginate/rGO nanocomposite hydrogel electrodes for enhanced performance supercapacitors10.1016/j.ijbiomac.2020.06.169 ↗
57. Preparation and characterization studies of La doped CuS nanospheres by microwave irradiation for high performance supercapacitors10.1016/j.physb.2019.08.028 ↗
58. Two-step synthesis of CuS/C@PANI nanocomposite as advanced electrode materials for supercapacitor applications10.3390/nano10061034 ↗
59. Dual S-scheme heterojunction ZnO–V2O5–WO3 nanocomposite with enhanced photocatalytic and antimicrobial activity10.1016/j.matchemphys.2021.124372 ↗
60. Tunability of physical properties of NiO by the introduction of rare earth metal (Y, Ho) dual doping for natural sunlight-driven photocatalysis10.1007/s10854-023-10095-5 ↗
61. Core-shell CeO2@C60 hybrid serves as a dual-functional catalyst: photocatalyst for organic pollutant degradation and electrocatalyst for oxygen evolution reaction10.1016/j.ceramint.2022.11.008 ↗
62. Heteroatom modification of heterostructured CuS/Mn3O4 with rich defects for solid-state supercapacitors
63. Fabrication of manganese oxide decorated copper oxide (MnO2/CuO) nanocomposite electrodes for energy storage supercapacitor devices
64. Design of p-CuS/n-CdFe2O4 heterojunction passivated with carbon nanofiber (CNF) for impressive performance in supercapacitor and photoelectrochemical water splitting
65. One-step hydrothermal synthesis of CuS@MnS on Ni foam for high performance supercapacitor electrode material10.1016/j.electacta.2019.03.041 ↗
66. Hydro/solvothermally grown ZnS/MnO2-metal organic framework-based hydrogel for all solid-state flexible supercapacitor10.1016/j.est.2023.109729 ↗
67. Effect of Ce doping in MnO2 nanosheet over Ni foam for supercapacitor application10.1007/s10008-024-05908-4 ↗
68. Investigating the electrochemical performance of MnSe-supported SrZrO3 perovskite oxide nanocomposite as an electrode material for supercapacitor10.1016/j.ceramint.2024.04.013 ↗
69. Scalable synthesis of MOF-derived Nd2O3@C and V2O5@C nanohybrid: efficient electrocatalyst for OER in alkaline medium10.1016/j.fuel.2023.129485 ↗