journal article·2023-03

Low-resistivity ruthenium metal thin films grown via atomic layer deposition using dicarbonyl-bis(5-methyl-2,4-hexanediketonato)ruthenium(II) and oxygen

Eun Chong Ko, Jae Yeon Kim, Hakseung Rhee, Kyung Min Kim, Jeong Hwan Han

Publisher page

Abstract

Herein, low-resistivity Ru metal films were fabricated via atomic layer deposition (ALD) using dicarbonyl-bis(5-methyl-2,4-hexanediketonato)Ru(II) and O 2 as the Ru precursor and co-reactant, respectively. ALD-grown Ru showed excellent growth characteristics, with high growth per cycle (0.89–1.44 Å/cycle), short incubation period (<3 cycles), and good conformality at deposition temperatures of 240–300 °C. Polycrystalline Ru films with a dense grain structure were obtained, and the crystallinity and grain size of the Ru metal films increased with increasing deposition temperature. The Ru films contained negligible carbon impurities at all investigated deposition temperatures; however, oxygen-impurity contents of 16, 8, and 3 at% were observed at 240, 270, and 300 °C, respectively. Interestingly, despite the presence of significant oxygen impurities, the as-prepared ALD-grown Ru metal films showed a very low resistivity of 13.6–16.5 μΩ cm. Post-deposition annealing at 400–700 °C enhanced the electrical resistivity of the film (to as low as ∼10.4 μΩ cm), owing to the increased grain size, dense and smooth surface morphology, and negligible oxygen-impurity content. Modeling of the electron scattering mechanism of the ALD-grown Ru films revealed that the grain size of the films substantially influences the film resistivity, whereas the oxygen impurity in the Ru film had a relatively insignificant effect.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. The search for the most conductive metal for narrow interconnect lines10.1063/1.5133671 ↗
2. Advanced BEOL materials , processes , and integration to reduce line resistance of damascene Cu , Co , and subtractive Ru interconnects
3. Interconnect trend for single digit nodes
4. Krishnan · 2016
5. Integration of dual metal gate CMOS with TaSiN (NMOS) and Ru (PMOS) gate electrodes on HfO2 gate dielectric
6. First demonstration of ruthenium and molybdenum word lines integrated into 40nm pitch 3D-NAND memory devices
7. Interconnect metals beyond copper: Reliability challenges and opportunities
8. Ruthenium interconnect resistivity and reliability at 48 nm pitch
9. Ru as an alternative material for advanced contacts, 2020
10. High-aspect-ratio ruthenium lines for buried power rail
11. Chemical vapor deposition of Ru thin films with an enhanced morphology, thermal stability, and electrical properties using a RuO4 precursor10.1021/cm802485r ↗
12. Al-doped TiO2 films with ultralow leakage currents for next generation DRAM capacitors10.1002/adma.200701085 ↗
13. Future of dynamic random-access memory as main memory10.1557/mrs.2018.95 ↗
14. Aaltonen · 2005
15. Copper electromigration; prediction of scaling limits
16. Atomic layer deposition of ruthenium with TiN interface for sub-10 nm advanced interconnects beyond copper10.1021/acsami.6b07181 ↗
17. Resistance scaling of Cu interconnect and alternate metal (Co, Ru) benchmark toward sub 10nm dimension
18. The potential of ruthenium and cobalt as next-generation
19. Ruthenium bottom electrode prepared by electroplating for a high density DRAM capacitor10.1149/1.1637900 ↗
20. Chemical vapor deposition of Ru thin films with an enhanced morphology, thermal stability, and electrical properties using a RuO4 precursor10.1021/cm802485r ↗
21. Ruthenium thin films grown by atomic layer deposition10.1002/cvde.200290007 ↗
22. Hwang · 2014
23. From the bottom-up: toward area-selective atomic layer deposition with high selectivity10.1021/acs.chemmater.8b03454 ↗
24. Area-selective atomic layer deposition of ruthenium using a novel Ru precursor and H2O as a reactant10.1021/acs.chemmater.0c04496 ↗
25. Atomic layer deposition of ruthenium thin films for copper glue layer10.1149/1.1640633 ↗
26. Atomic layer deposition of ruthenium thin films from Ru(thd)3 and oxygen10.1002/cvde.200306288 ↗
27. Atomic layer deposition of ruthenium and ruthenium oxide thin films from a zero-valent (1,5-Hexadiene)(1-isopropyl-4-methylbenzene)ruthenium complex and O210.1021/cm5035485 ↗
28. Atomic layer deposition of ruthenium and ruthenium oxide using a zero-oxidation state precursor10.1021/acs.chemmater.6b04251 ↗
29. Atomic layer deposition of a ruthenium thin film using a precursor with enhanced reactivity10.1039/D0TC05682K ↗
30. Atomic layer deposition of Ru thin films using a new beta-diketonate Ru precursor and NH3 plasma as a reactant10.1166/jnn.2015.11452 ↗
31. Plasma-free atomic layer deposition of Ru thin films using H2 molecules as a nonoxidizing reactant
32. Thermal atomic layer deposition of metallic Ru using H2O as a reactant10.1016/j.apsusc.2019.05.242 ↗
33. Effects of annealing on the properties of atomic layer deposited Ru thin films deposited by NH3 and H2 as reactant10.1016/j.tsf.2016.05.048 ↗
34. Atomic layer deposition of Ru thin films using 2,4-(Dimethylpentadienyl)(ethylcyclopentadienyl)Ru by a liquid injection system10.1149/1.2403081 ↗
35. Resistivity size effect in epitaxial Ru(0001) layers10.1063/1.5046430 ↗
36. Influence of phonon, geometry, impurity, and grain size on Copper line resistivity10.1063/1.2355435 ↗
37. The mean free path of electrons in metals10.1080/00018730110102187 ↗
38. Electrical-resistivity model for polycrystalline films: the case of arbitrary reflection at external surfaces10.1103/PhysRevB.1.1382 ↗