Pressure effects in RF and DC sputtered Sb2Te3 thin films and its applications into solar cells
Source abstract
Abstract
Abstract In this work we developed the synthesis and characterization of Sb2Te3 thin films, which were grown by RF as well as DC sputtering as a function of the deposition pressure (Pd), 5–15 mTorr. Sb2Te3 films were characterized through X-Ray Diffraction, Energy Dispersive Spectrometry (EDS), Scanning Electron Microscopy (SEM) and electrical resistivity measurements. As a part, contact layer, of the CdTe-based Solar Cell, Current-Voltage (I–V) as well as External Quantum Efficiency (EQE) measurements were carried out. Our results indicate that the radio-frequency sputtered Sb2Te3 are polycrystalline with predominant rhombohedral crystalline structure, whereas the DC-sputtered films crystallized mainly in the monoclinical structure. Both set of samples showed a resistivity of the order of 10−4 Ω-cm. Concerning the CdTe-based solar cell, the incorporation of the Sb2Te3 as a back surface film in the back contact improves the solar cell efficiency up to 8.01%, 10 mTorr pressures into the growth chamber, as compared to the CdTe-based solar cell, 4.82% efficiency, without the Sb2Te3 layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Advanced Thermoelectric Materials and Devices · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Romeo · 2000
2. A study of the back contacts on CdTe/CdS solar cells
3. A highly efficient and stable CdTe/CdS thin film solar cell10.1016/S0927-0248(98)00204-9 ↗
4. Thermoelectric characterization of ion beam sputtered Sb2Te3 thin films10.1016/j.jallcom.2010.06.046 ↗
5. Single-source precursor-based deposition of Sb2Te3 films by MOCVD**10.1002/cvde.201207044 ↗
6. MOCVD Growth of Bi2Te3-Sb2Te3 Layers : Effect of Growth Parameters on the Electrical and Thermoelectrical Properties
7. Thermoelectric characterization of electrochemically deposited Bi2Te3 films accounting for the presence of conductive seed layers10.1149/2.101309jes ↗
8. Thermoelectric characteristics of Sb2Te3 thin films formed via surfactant-assisted electrodeposition10.1039/c3ta01631e ↗
9. Preparation and characterization of Sb2Te3 thin films by coevaporation
10. Influence of substrate temperature on structural and thermoelectric properties of antimony telluride thin films fabricated by RF and DC
11. Effects of annealing on thermoelectric properties of Sb2Te3 thin films prepared by radio frequency magnetron sputtering10.1007/s10854-012-0888-1 ↗
12. Improving CdS/CdTe thin film solar cell efficiency by optimizing the physical properties of CdS with the application of thermal and chemical treatments10.1016/j.tsf.2014.10.070 ↗
13. Enhanced thermoelectric properties of Sb2Te3 and Bi2Te3 films for flexible thermal sensors10.1016/j.jallcom.2018.09.324 ↗
14. Enhancing thermoelectric properties of Sb2Te3 flexible thin film through microstructure control and crystal preferential orientation engineering
15. N.R. Paudel, K.A. Wieland, A.V. Nawarange, D.A. Sanchez, K. Gardinier and A.D. Compaan. Studies of RF Sputtered Sb2Te3 Thin Films for Back Contacts to CdS/CdTe Solar Cells. 978-1-4244-9965-6/11/$26.00 ©2011 IEEE.10.1007/s10854-014-2366-4 ↗
16. Spectral response of CdS/CdTe solar cells obtained with different S/Cd ratios for the CdS chemical bath”10.1016/j.solmat.2006.02.020 ↗
17. Gorji