journal article·2024-01

MEMS-based piezoresistive and capacitive microphones: A review on materials and methods

Ashish Kumar, Arathy Varghese, Dheeraj Kalra, Anshuman Raunak, Jaiverdhan, Mahanth Prasad, Vijay Janyani, R.P. Yadav

Publisher page

Abstract

Microelectromechanical systems (MEMS)-based piezoresistive and capacitive microphones have gained significant attention due to their miniaturization, high performance, and diverse applications. This review paper provides a comprehensive overview of the materials and methods employed in these microphone technologies. We discussed various transduction mechanisms, including electrostatic, piezoresistive, and piezoelectric, along with their working principles and advantages. Additionally, we explored the utilization of surface acoustic wave (SAW) and bulk acoustic wave (BAW) resonators in microphone design. Performance characteristics such as sensitivity, noise floor, linearity, dynamic range, and bandwidth are analyzed, highlighting the key factors influencing microphone performance. Furthermore, we delve into the application areas of these microphones, ranging from aircraft design and satellite launching to biomedical fields and audio engineering. Lastly, we discuss the materials used for MEMS microphones, focusing on substrate materials, etchant materials, and the specific requirements for piezoresistive and capacitive materials based microphones. Further, this review paper explores the emerging trends of graphene-based microphones, MEMS/NEMS hybrid devices, and the integration of artificial intelligence and signal processing techniques, as well as the potential applications in biomedical and healthcare fields, providing a comprehensive overview of the materials and methods employed in MEMS-based capacitive and piezoresistive microphones.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · Advanced MEMS and NEMS Technologies · Innovative Energy Harvesting Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. A piezoelectric micro-electromechanical microphone for implantable hearing aid applications10.1007/s00542-014-2134-7 ↗
2. A technical review and evaluation of implantable sensors for hearing devices10.1186/s12938-018-0454-z ↗
3. Bay · 1997
4. A new measurement microphone based on MEMS technology10.1109/JMEMS.2003.820260 ↗
5. Eargle · 2012
6. J Bernstein, M Weinberg, E McLaughlin, J Powers, F Tito, Advanced micromachined condenser hydrophone, in: Tech. Digest 1994 Solid-State Sensor and Actuator Workshop (Hilton Head, SC, 1994), 1994, pp. 73–7.10.31438/trf.hh1994.17 ↗
7. Hydrogel microphones for stealthy underwater listening10.1038/ncomms12316 ↗
8. An invisible acoustic sensor based on parity-time symmetry10.1038/ncomms6905 ↗
9. CMOS-MEMS membrane for audio-frequency acoustic actuation10.1016/S0924-4247(01)00728-2 ↗
10. A review of silicon microphones10.1016/0924-4247(94)00790-X ↗
11. Liu · 2012
12. Rossi · 1988
13. High-q single crystal silicon HARPSS capacitive beam resonators with self-aligned sub-100-nm transduction gaps10.1109/JMEMS.2003.811726 ↗
14. Fully monolithic CMOS nickel micromechanical resonator oscillator
15. Piezoresistance effect in germanium and silicon10.1103/PhysRev.94.42 ↗
16. A silicon subminiature microphone based on piezoresistive polysilicon strain gauges10.1016/0924-4247(92)80043-3 ↗
17. A MEMS microphone for aeroacoustics measurements
18. Cady · 1964 · 1
19. Structural study of aluminium nitride thin film grown by radio frequency sputtering technique
20. Deposition and Optimization of Zinc Oxide Thin Film Using Its Nano-colloidal Solution for Various Sensing Applications
21. Piezoelectric-on-silicon lateral bulk acoustic wave micromechanical resonators10.1109/JMEMS.2007.906758 ↗
22. Thin-film piezoelectric-on-silicon resonators for high-frequency reference oscillator applications10.1109/TUFFC.2008.976 ↗
23. Design, fabrication and reliability study of piezoelectric ZnO based structure for development of MEMS acoustic sensor10.1007/s00542-019-04524-x ↗
24. Fabrication and simulation of piezoelectric aluminium nitride based micro electro mechanical system acoustic sensor10.1166/jno.2019.2637 ↗
25. Piezoelectric characterization of individual zinc oxide nanobelt probed by piezoresponse force microscope10.1021/nl035198a ↗
26. Mehmet Ozdogan, Shahrzad Towfighian, A MEMS microphone using repulsive force sensors, in: ASME International Design Engineering Technical Conferences, 2016.10.1115/DETC2016-60171 ↗
27. Error and performance analysis of MEMS-based inertial sensors with a low-cost GPS receiver10.3390/s8042240 ↗
28. Use of sputtered zinc oxide film on aluminium foil substrate to produce a flexible and low profile ultrasonic transducer10.1016/j.ultras.2016.02.008 ↗
29. Polymeric piezoelectric transducers for hydrophone applications10.14429/dsj.57.1723 ↗
30. Directional Optimization of MEMS Piezoelectric Hydrophone for Underwater Application
31. Design , Fabrication , and Measurement of High-Sensitivity Piezoelectric Microelectromechanical Systems Accelerometers10.1109/JMEMS.2003.811749 ↗
32. In-plane MEMS-based nano-g accelerometer with sub-wavelength optical resonant sensor10.1016/j.sna.2008.03.017 ↗
33. Accelerometer-Based Acoustic Control: Enabling Auscultation on a Black Hawk Helicopter10.1109/TMECH.2016.2603444 ↗
34. Fabrication of SU-8 embedded microchannels with circular cross-section10.1016/j.ijmachtools.2004.02.021 ↗
35. Highly sensitive and multifunctional tactile sensor using free-standing ZnO/PVDF thin film with graphene electrodes for pressure and temperature monitoring10.1038/srep07887 ↗
36. MEMS sensor fusion: Acoustic emission and strain10.1016/j.sna.2016.05.014 ↗
37. MEMS-based acoustic sensors for fluid mechanics and aeroacoustics10.1121/1.4988150 ↗
38. Design and fabrication of microtunnel and Si-diaphragm for ZnO based MEMS acoustic sensor for high SPL and low frequency application10.1007/s00542-014-2291-8 ↗
39. Development of a micromachined piezoelectric microphone for aeroacoustics applications10.1121/1.2785040 ↗
40. Fabrication and sensitivity analysis of guided beam piezoelectric energy harvester10.1109/TED.2018.2869690 ↗
41. Wide-bandwidth MEMS-scale piezoelectric energy harvester wide-bandwidth MEMS-scale piezoelectric energy harvester
42. A MEMS acoustic energy harvester10.1088/0960-1317/16/9/S02 ↗
43. Secondary pressure calibration of measurement microphones10.1088/0026-1394/51/3/129 ↗
44. Resonance-enhanced piezoelectric microphone array for broadband or prefiltered acoustic sensing10.1109/JMEMS.2012.2216505 ↗
45. Consistent DOA estimation of heavily noisy gunshot signals using a microphone array10.1049/iet-rsn.2016.0015 ↗
46. Development of a FPW allergy biosensor for human IgE detection by MEMS and cystamine-based SAM technologies10.1016/j.snb.2008.01.048 ↗
47. Micro-electromechanical film bulk acoustic sensor for plasma and whole blood coagulation monitoring10.1016/j.bios.2016.12.063 ↗
48. An AlN MEMS piezoelectric microphone for aeroacoustic applications10.1109/JMEMS.2011.2176921 ↗
49. Surface acoustic wave vibration sensors for measuring aircraft flutter
50. Fabrication of graphene–ZnO heterostructure-based flexible and thin platform-based UV detector10.1007/s10854-021-07578-8 ↗
51. Influence of post-annealing treatment on the structure properties of ZnO films10.1016/j.apsusc.2004.07.056 ↗
52. Effect of annealing temperature on structural, optical and electrical properties of zinc oxide (ZnO) thin films deposited by spray pyrolysis technique10.1016/j.ijleo.2015.08.267 ↗
53. Fabrication and annealing temperature optimization for a piezoelectric ZnO based MEMS acoustic sensor10.1007/s11664-019-07383-4 ↗
54. Yoshio Satoh, Osamu Ikata, Tsutomu Miyashita, Hideki Ohmori, RF SAW Filters, in: International Symposium on Acoustic Wave Devices for Future Mobile Communication Systems, 2001, pp. 125–132.
55. Passive wireless SAW - MEMS pressure sensor/microphone
56. High precision pressure sensors based on SAW devices in the GHz range10.1016/j.sna.2012.09.012 ↗
57. Modelling and optimization of PVDF based surface acoustic wave MEMS microphone
58. Modeling, fabrication, and structural characterization of thin film ZnO based film bulk acoustic resonator
59. Overview of acoustic-wave microsensors
60. Design, analysis and finite element modeling of solidly mounted film bulk acoustic resonator for gas sensing applications10.1007/s11664-019-07843-x ↗
61. Design and optimization of a BAW microphone sensor10.3390/mi13060893 ↗
62. Magnetron deposition of AlN and ScAlN for mass-production for BAW devices and MEMS
63. Recent development and futuristic applications of MEMS based piezoelectric microphones10.1016/j.sna.2022.113887 ↗
64. Williams · 2011
65. Optimization and fabrication of MEMS based piezoelectric acoustic sensor for wide frequency range and high SPL acoustic application10.1016/j.micrna.2023.207592 ↗
66. Stress analysis of circular membrane-type MEMS microphones with piezoelectric read-out10.1016/j.sna.2022.114003 ↗
67. Design, modeling and simulation of square diaphragm based, piezoelectric (AlN) MEMS acoustic sensor for high SPL measurements10.1007/978-3-319-97604-4_112 ↗
68. A surface-micromachined MEMS acoustic sensor with X-shape bottom electrode anchor
69. Piezoelectric microphone built on circular diaphragm10.1016/j.sna.2008.02.001 ↗
70. ZnO on Si integrated acoustic sensor10.1016/0250-6874(83)85044-6 ↗
71. Physical noise sources
72. Thomas Van de Ven, John Louis, Dean Palfreyman, Fred Mendoca, Computational aeroacoustic analysis of a 1/4 scale G550 nose landing gear and comparison to NASA and UFL wind tunnel data, in: 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference), 2009, p. 3359.10.2514/6.2009-3359 ↗
73. Kleiner · 2011
74. A micromachined dual-backplate capacitive microphone for aeroacoustic measurements10.1109/JMEMS.2007.909234 ↗
75. Design and fabrication of si-diaphragm, ZnO piezoelectric film-based MEMS acoustic sensor using SOI wafers10.1109/TSM.2013.2238956 ↗
76. Goldstein · 1976 · 305
77. Federal Aviation Regulation Part, Noise Standards: Aircraft Type and Airworthiness Certification, Technical report, 2005.
78. Allen · 2002
79. Preliminary analysis of acoustic measurements from the NASA-gulfstream airframe noise flight test
80. Airplane noise: A pervasive disturbance in Pennsylvania parks, USA10.1016/j.jsv.2003.09.014 ↗
81. Nagy · 1971
82. Nagy · 1965
83. Advances in microsensors and wearable bioelectronics for digital stethoscopes in health monitoring and disease diagnosis10.1002/adhm.202101400 ↗
84. The electronic stethoscope10.1186/s12938-015-0056-y ↗
85. Continuous health monitoring with resonant-microphone-array-based wearable stethoscope10.1109/JSEN.2019.2900713 ↗
86. Passive wireless MEMS microphones for biomedical applications10.1115/1.2049330 ↗
87. Cell-based acoustic sensors for biomedical applications
88. Air-borne and tissue-borne sensitivities of bioacoustic sensors used on the skin surface10.1109/TBME.2008.2008165 ↗
89. Vizas · 2018
90. A super-lyophobic PDMS micro-tunnel as a novel microfluidic platform for oxidized Galinstan®
91. Brown · 2010
92. A graphical representation of the piezoresistance coefficients in silicon10.1109/T-ED.1982.20659 ↗
93. Piezoresistive semiconductor microphone10.1121/1.1908846 ↗
94. An IC piezoresistive pressure sensor for biomedical instrumentation
95. A small-size silicon microphone for measurements in turbulent gas flows10.1016/0924-4247(94)00824-8 ↗
96. Low pressure acoustic sensors for airborne sound with piezoresistive monocrystalline silicon and electrochemically etched diaphragms10.1016/0924-4247(94)00881-H ↗
97. Mark Sheplak, Kenneth S. Breuer, Martin A. Schmidt, A wafer-bonded, silicon-nitride membrane microphone with dielectrically-isolated, single-crystal silicon piezoresistors, in: Technical Digest, Solid-State Sensor and Actuator Workshop, 1998, pp. 23–26.10.31438/trf.hh1998.6 ↗
98. David P Arnold, Sridhar Gururaj, Sunil Bhardwaj, Toshikazu Nishida, Mark Sheplak, A piezoresistive microphone for aeroacoustic measurements, in: Proceedings of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, 2001, pp. 281–288.10.1115/IMECE2001/MEMS-23841 ↗
99. Piezoresistive microphone with integrated amplifier realized using metal-induced laterally crystallized polycrystalline silicon10.1088/0960-1317/14/10/009 ↗
100. A MEMS multi-sensor chip for gas flow sensing10.1016/j.sna.2004.12.022 ↗