Single crystal silicon wafer polishing by pretreating pad adsorbing SiO2 grains and abrasive-free slurries
Source abstract
Abstract
Single crystal silicon wafers are widely applied in the field of Integrated Circuits (ICs). However, in order to pursue high surface quality and efficient material removal rate (MRR) on polishing single crystal silicon, a large amount of abrasives is consumed, which increases the processing cost and burdens the environment on discharge. A novel abrasive-free method of polishing single crystal silicon wafers was proposed and explored to solve the above problems. A polishing pad pretreated by colloidal silica was employed. The MRRs of the polished silicon wafers with potassium carbonate, potassium silicate and potassium hydroxide slurries before and after pretreating pads were measured and compared. The polishing pad pretreated by colloidal silica can improve the processing efficiency, stability and quality of single crystal silicon wafers in the abrasive-free slurries containing potassium carbonate, potassium hydroxide or potassium silicate. The outstanding MRR of silicon wafer was obtained using abrasive-free slurries containing potassium carbonate and potassium silicate. The material removal mechanisms of polishing single crystal silicon wafers with pretreating pad adsorbing SiO 2 grains and abrasive-free slurries were investigated by XPS analysis of silicon wafer surfaces and EDS and SEM analysis of the pad surfaces.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Material removal mechanism in chemical mechanical polishing: theory and modeling10.1109/66.920723 ↗
2. Progress in material removal mechanisms of surface polishing with ultra precision10.1007/BF03184299 ↗
3. Grinding of silicon wafers: a review from historical perspectives10.1016/j.ijmachtools.2008.05.009 ↗
4. The possibility of multi-layer nanofabrication via atomic force microscope-based pulse electrochemical nanopatterning10.1088/1361-6528/aa6954 ↗
5. Study on the effect of ceria concentration on the silicon oxide removal rate in chemical mechanical planarization
6. Electrochemical behavior and polishing properties of silicon wafer in alkaline slurry with abrasive CeO210.1016/S1003-6326(08)60032-1 ↗
7. Chemical effect on the material removal rate in the CMP of silicon wafers
8. Research on Si (100) crystal substrate CMP based on FA/O alkaline slurry10.1016/j.apsusc.2017.05.128 ↗
9. Nanomanufacturing of silicon surface with a single atomic layer precision via mechanochemical reactions
10. Investigation on the final polishing slurry and technique of silicon substrate in ULSI10.1016/S0167-9317(02)00908-5 ↗
11. Influence of colloidal silica dispersion on the decrease of roughness in silicon chemical mechanical polishing10.1049/mnl.2015.0592 ↗
12. Influence of Zn (II) ion on abrasive-free polishing of hard disk substrate10.1016/j.tsf.2014.04.069 ↗
13. Characteristics of abrasive-free micelle slurry for copper CMP10.1149/1.1594731 ↗
14. Chemical mechanical planarization of copper using abrasive-free solutions of oxalic acid and hydrogen peroxide10.1016/j.matchemphys.2006.11.015 ↗
15. Comparison of dicarboxylic acids as complexing agents for abrasive-free chemical mechanical planarization of copper10.1016/j.mee.2006.08.011 ↗
16. Investigation of abrasive-free slurry for polysilicon buffing chemical mechanical planarization10.1016/j.mssp.2021.105755 ↗
17. Effect of hydroxyethyl cellulose concentration on surface qualities of silicon wafer after touch polishing process10.1149/1.3314249 ↗
18. The effect of the interface reaction mode on chemical mechanical polishing10.1016/j.cirpj.2020.08.005 ↗
19. Humidity dependence of tribochemical wear of monocrystalline silicon10.1021/acsami.5b03043 ↗
20. Effect of abrasive particle size on tribochemical wear of monocrystalline silicon10.1016/j.triboint.2016.12.050 ↗
21. A novel chemical mechanical polishing slurry for yttrium aluminum garnet crystal10.1016/j.apsusc.2019.143601 ↗