The effect of contact types on SiC polishing process
Source abstract
Abstract
To better understand the effects of different contact types on polishing characteristics of SiC wafer, the different contact types during polishing are simplified as the self-rotation of diamond abrasives. Through molecular dynamics simulation, three different material removal modes are proposed and graphite structure after the wear of diamond was displayed. It is found that the material removal mode of 3C–SiC changes from cutting removal to adhesion removal via compression removal, and finally returns to cutting removal, with the increase of the abrasive linear velocity. The wear of diamond abrasive is the most serious when there is no self-rotation, and graphite will form after diamond is worn. When the abrasive only rolls forward, the wear of diamond abrasive is the least, and the material removal rate is also the least. The self-rotation of diamond abrasives can significantly reduce the structural damage of the workpiece and the increment of system temperature and potential energy. Also, the self-rotation of abrasives can reduce the tangential force, which leads to the decrease of friction coefficient. Based on the above results, it is proved that the self-rotation of abrasive particles in the polishing process cannot be ignored.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. The current understanding on the diamond machining of silicon carbide10.1088/0022-3727/47/24/243001 ↗
2. Dependency of the structure of a water layer sandwiched by silicon carbide on shear speed and temperature10.1088/1361-648X/abce6d ↗
3. Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide10.1016/j.commatsci.2011.07.052 ↗
4. Review on SiC MOSFETs high-voltage device reliability focusing on threshold voltage instability10.1109/TED.2019.2938262 ↗
5. A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide10.1016/j.jeurceramsoc.2012.04.016 ↗
6. Mechanisms of growth and defect properties of epitaxial SiC10.1063/1.4890974 ↗
7. Genesis and evolution of extended defects: the role of evolving interface instabilities in cubic SiC10.1063/1.5132300 ↗
8. A study of deformation behavior and phase transformation in 4H-SiC during nanoindentation process via molecular dynamics simulation10.1016/j.ceramint.2018.10.261 ↗
9. Brittle–ductile transition during diamond turning of single crystal silicon carbide10.1016/j.ijmachtools.2012.09.001 ↗
10. Damage-free machining of monocrystalline silicon carbide10.1016/j.cirp.2013.03.098 ↗
11. Investigation of nanocutting characteristics of off-Axis 4H-SiC substrate by molecular dynamics10.3390/app8122380 ↗
12. Effect of inclusion on 4H-SiC during nano-scratching from an atomistic perspective10.1088/1361-648X/ac18f2 ↗
13. Removal behavior of micropipe in 4H-SiC during micromachining10.1016/j.jmapro.2021.06.020 ↗
14. Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting10.1186/1556-276X-6-589 ↗
15. Molecular dynamics simulation of SiC removal mechanism in a fixed abrasive polishing process10.1016/j.ceramint.2019.04.180 ↗
16. Investigation on the material removal and surface generation of a single crystal SiC wafer by ultrasonic chemical mechanical polishing combined with ultrasonic lapping10.3390/ma11102022 ↗
17. The polishing effect of SiC substrates in femtosecond laser irradiation assisted chemical mechanical polishing (CMP)
18. AFM observation of initial oxidation stage of 4H-SiC (0001) in electrochemical mechanical polishing10.1016/j.procir.2017.12.129 ↗
19. XTEM observation of 4H-SiC (0001) surfaces processed by plasma assisted polishing10.4028/www.scientific.net/AMR.497.156 ↗
20. Atomic scale deformation in silicon monocrystals induced by two-body and three-body contact sliding10.1016/S0301-679X(98)00064-4 ↗
21. Abrasive rolling effects on material removal and surface finish in chemical mechanical polishing analyzed by molecular dynamics simulation10.1063/1.3575177 ↗
22. Molecular dynamics simulation of self-rotation effects on ultra-precision polishing of single-crystal copper10.1063/1.4824625 ↗
23. Material removal and wear mechanism in abrasive polishing of SiO2/SiC using molecular dynamics10.1016/j.ceramint.2020.05.263 ↗
24. A study of ultraprecision mechanical polishing of single-crystal silicon with laser nano-structured diamond abrasive by molecular dynamics simulation10.1016/j.ijmecsci.2019.04.027 ↗
25. The influence of different cutting speeds on the cutting force and strain–stress behaviors of single crystal copper during nano-scale orthogonal cutting10.1016/j.jmatprotec.2007.11.259 ↗
26. A numerical study of residual stress induced in machined silicon surfaces by molecular dynamics simulation10.1007/s00339-013-7977-8 ↗
27. Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide10.1103/PhysRevB.71.035211 ↗
28. Science and art of ductile grinding of brittle solids10.1016/j.ijmachtools.2020.103675 ↗
29. Micromechanics of machining and wear in hard and brittle materials10.1111/jace.17502 ↗
30. Transformation of diamond to graphite under heat treatment at low pressure10.1080/01411594.2013.807429 ↗
31. Kinetics of the graphitization of dispersed diamonds at “low” temperatures10.1063/1.1289791 ↗
32. Amorphization and dislocation evolution mechanisms of single crystalline 6H-SiC10.1016/j.actamat.2019.10.037 ↗
33. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
34. On the existence of Si–C double bonded graphene-like layers10.1016/j.cplett.2009.08.028 ↗
35. The effect of rough surface on nanoscale high speed grinding by a molecular dynamics simulation10.1016/j.commatsci.2014.10.069 ↗
36. Study of the temperature and stress in nanoscale ductile mode cutting of silicon using molecular dynamics simulation10.1016/j.jmatprotec.2007.04.028 ↗
37. Evolution of nano-cracks in single-crystal silicon during ultraprecision mechanical polishing10.1016/j.jmapro.2020.08.005 ↗
38. Influences of grain size, alloy composition, and temperature on mechanical characteristics of Si100-xGex alloys during indentation process10.1016/j.mssp.2020.105568 ↗
39. Phase transformation and subsurface damage formation in the ultrafine machining process of a diamond substrate through atomistic simulation
40. An investigation of tool and hard particle interaction in nanoscale cutting of copper beryllium10.1016/j.commatsci.2018.01.011 ↗