Diamond Schottky barrier diodes with floating metal rings for high breakdown voltage
Source abstract
Abstract
Abstract Investigation of influence of floating metal rings (FMRs) edge termination technique on the breakdown voltages of diamond Schottky barrier diodes (SBDs) has been carried out. Unintentionally doped P- drift layer was grown on HPHT boron doped diamond substrate by microwave plasma CVD system and treated by ultraviolet ozone. Then, Ti/Ni/Au electrode was deposited on the back side of the substrate to form ohmic contact. Zr/Ni/Au Schottky electrodes with different FMRs parameters, such as ring spacing (RS), ring width (RW) and ring number (RN), were deposited on the P- layer. The I–V measurement results show that breakdown voltages increase firstly and then decease with increasing of RS. The increases of RW and RN are beneficial to improve breakdown voltages. Moreover, FMRs structure can effectively improve breakdown voltages without deteriorating forward current density and rectification ratio of diamond SBDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Semiconductor materials and devices · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. High carrier mobility in single-crystal plasma-deposited diamond10.1126/science.1074374 ↗
2. Electronic properties of CVD diamond10.1088/0268-1242/18/3/301 ↗
3. New unipolar switching power device figures of merit10.1109/LED.2004.826533 ↗
4. High-voltage single-crystal diamond diodes10.1109/TED.2004.826867 ↗
5. Exceptionally high voltage Schottky diamond diodes and low boron doping10.1088/0268-1242/18/3/309 ↗
6. Electric field breakdown of lateral Schottky diodes of diamond, Japanese10.1143/JJAP.46.L196 ↗
7. Characterization of leakage current on diamond Schottky barrier diodes using thermionic-field emission modeling10.1016/j.diamond.2006.08.030 ↗
8. The guard-ring termination for the high-voltage sic Schottky barrier diodes10.1109/55.388724 ↗
9. Fabrication of a field plate structure for diamond Schottky barrier diodes10.1016/j.diamond.2008.10.021 ↗
10. Optimisation of junction termination extension for the development of a 2000 V planar 4H-SiC diode10.1016/S0925-9635(02)00283-2 ↗
11. Floating metal rings (FMR), a novel high-voltage blocking technique10.1109/EDL.1985.26244 ↗
12. Seung-Chul Lee, Jin-Cherl Her, Soo-Seong Kim, Min-Woo Ha, Kwang-Seok Seo, Yearn-Ik Choi, Min-Koo Han, A new vertical GaN Schottky barrier diode with floating metal ring for high breakdown voltage, in: Proceedings of the 16th International Symposium Power Semicond. Devices IC’s, 2004, pp. 319–322. 〈https://doi.org/10.1109/WCT.2004.240037〉.10.1109/WCT.2004.240037 ↗
13. M.-W.H. Seung-Chul Lee, High breakdown voltage GaN Schottky barrier diode employing floating metal rings on AlGaN/GaN hetero-junction, 2005 IEEE 17th International Symposium Power Semicond. Devices ICs, 2005, pp. 247–250. 〈https://doi.org/10.1109/ISPSD.2005.1487997〉.10.1109/ISPSD.2005.1487997 ↗
14. Electric field distribution using floating metal guard rings edge-termination for Schottky diodes10.1016/j.diamond.2018.01.016 ↗
15. Analysis of diamond pseudo-vertical Schottky barrier diode through patterning tungsten growth method10.1063/1.5020317 ↗
16. Normally-off hydrogen-terminated diamond field-effect transistor with Al2O3 dielectric layer formed by thermal oxidation of Al10.1016/j.diamond.2017.11.016 ↗
17. Low-leakage p-type diamond Schottky diodes prepared using vacuum ultraviolet light/ozone treatment10.1063/1.3153986 ↗
18. Ozone-treated channel diamond field-effect transistors10.1016/S0925-9635(03)00277-2 ↗
19. Ohmic contacts to semiconducting diamond using a Ti/Pt/Au trilayer metallization scheme10.1016/S0925-9635(96)00566-3 ↗
20. Diamond MIP structure Schottky diode with different drift layer thickness10.1016/j.diamond.2016.11.005 ↗
21. Sze · 1981
22. M. Bhatnagar, H. Nakanishi, S. Bothra, P.K. McLarty, B.J. Baliga, Edge terminations for SiC high voltage Schottky rectifiers, in: Proceedings of the 1993 Proceedings 5th International Symposium Power Semicond. Devices ICs, 1993, pp. 89–94. 〈https://doi.org/10.1109/ISPSD.1993.297115〉.10.1109/ISPSD.1993.297115 ↗
23. Leakage current in Ti/4H-SiC Schottky barrier diode10.1016/j.physb.2005.12.096 ↗
24. Influence of surface roughness on breakdown voltage of 4H-SiC SBD with FLR structure10.4028/www.scientific.net/MSF.615-617.643 ↗
25. Extraction of Schottky diode parameters from forward current–voltage characteristics10.1063/1.97359 ↗