Molecular dynamics simulation of nano-polishing of single crystal silicon on non-continuous surface
Source abstract
Abstract
Abstract A molecular dynamic model of diamond abrasive polishing single crystal silicon is established. The effects of pores on the material removal process and the mechanism of pore wall material removal are studied from the aspects of displacement, polishing force, and phase transformation. The simulation results show that the removal method of material at pore walls is mainly shear and extrusion. The deformation of the pore walls in the entry areas of pores is an elastoplastic mixed deformation, and the deformation of the pore walls in the exit areas of pores is plastic deformation. Increasing the polishing depth increases plastic removal of material at pores. The existence of pores makes the tangential and normal forces decrease to a certain extent during the entire polishing process. The fluctuation of the normal polishing force is greater than that of the tangential polishing force. The lack of material at the pores is the main reason for the decrease of the normal polishing force. As the polishing depth increases, the tangential force increases significantly, and the normal force increases less. During the polishing process, phase transformation atoms with coordination number of 5 and phase transformation atoms with coordination number of 6 are main types of phase transformation atoms. High-pressure phase transformation is the main form of phase transformation. Due to the lack of atoms at the pores, the phase transformation of the pore walls in the entry areas of pores will be extended longitudinally. In the process of increasing the polishing depth, the number of main phase transformation atoms increased, and the degree of phase transformation in the pore area deepened.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Pore structure, porosity and compressive strength of highly porous reaction-bonded silicon nitride ceramics with various grain morphologies10.1007/s10853-019-04078-3 ↗
2. High interfacial thermal resistance induced low thermal conductivity in porous SiC-SiO2 composites with hierarchical porosity10.1016/j.jeurceramsoc.2019.10.056 ↗
3. Electrospun carbon nanofibers with multi-aperture/opening porous hierarchical structure for efficient CO2 adsorption
4. Tailoring porous silicon for biomedical applications: from drug delivery to cancer immunotherapy10.1002/adma.201703740 ↗
5. Molecular dynamics simulations of the effects of nanopores on mechanical behavior in the Mg2Sn system10.1016/j.commatsci.2019.01.043 ↗
6. Porosity and geometry control ductile to brittle deformation in indentation of porous solids10.1016/j.ijsolstr.2016.03.031 ↗
7. Micromechanical simulation of the pore size effect on the structural stability of brittle porous materials with bicontinuous morphology10.1039/C9CP01582E ↗
8. Size effects in finish machining of porous powdered metal for engineered surface quality10.1016/j.precisioneng.2015.12.004 ↗
9. Porous tungsten machining under cryogenic conditions10.1016/j.ijrmhm.2012.04.009 ↗
10. Material removal mechanism and surface integrity in ultraprecision cutting of porous titanium10.1016/j.precisioneng.2018.01.014 ↗
11. Study on the tribological properties of porous titanium sliding against tungsten carbide YG610.3390/met7010028 ↗
12. Feasibility investigation of direct laser cutting process of metal foam with high pore density10.1007/s00170-018-1796-1 ↗
13. Improving ductility of nanoporous metallic glasses10.1016/j.commatsci.2019.05.042 ↗
14. Molecular dynamics modelling of brittle–ductile cutting mode transition: case study on silicon carbide10.1016/j.ijmachtools.2014.10.007 ↗
15. Molecular dynamics investigations on polishing of a silicon wafer with a diamond abrasive10.1007/s00339-010-5570-y ↗
16. A molecular dynamics investigation into nanoscale scratching mechanism of polycrystalline silicon carbide10.1016/j.commatsci.2018.02.038 ↗
17. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
18. Revealing the deformation mechanisms of 6H-silicon carbide under nano-cutting10.1016/j.commatsci.2017.05.048 ↗
19. Numerical study of three-body diamond abrasive polishing single crystal Si under graphene lubrication by molecular dynamics simulation10.1016/j.commatsci.2019.109214 ↗
20. Atomistic simulation of influence of laser nano-structured diamond abrasive on the polishing behavior of silicon10.1016/j.mssp.2019.104706 ↗
21. Ultraprecision surface flattening of porous silicon by diamond turning10.1016/j.precisioneng.2017.02.015 ↗
22. Effects of tool rake angle and tool nose radius on surface quality of ultraprecision diamond-turned porous silicon10.1016/j.jmapro.2018.12.003 ↗
23. Dynamics simulation of photonic crystal fiber end face polishing10.1177/1687814017711810 ↗
24. Edge trimming of carbon fiber-reinforced plastic composites using rotary ultrasonic machining: effects of tool orientations10.1007/s00170-018-2355-5 ↗
25. Modeling solid-state chemistry: interatomic potentials for multicomponent systems10.1103/PhysRevB.39.5566 ↗
26. Comparison of tool–chip stress distributions in nano-machining of monocrystalline silicon and copper10.1016/j.ijmecsci.2013.09.024 ↗