The effects on durability and mechanical properties of multiple nano and micro additive OPC mortar exposed to combined chloride and sulfate attack
Source abstract
Abstract
Abstract This study aims to improve the resistance of Portland Cement mortar to a combined chloride and sulfate attacks by the partial replacement of cement with nano and micro Pozzolan Material. The durability of the OPC mortar mixes investigated using Pozzolans, Fly Ash (FA), Metakaoline (MK), Slag with nano additives namely, Nano silica (NS), Nano titania (NT) and Nano alumina (NA) separately and in combined form. After proper curing, they treated with aggressive chemicals 5%NaCl, 5% Na2SO4 and 5% NaCl–5%Na2SO4 and tested their compressive strength at shorter and longer duration (7–180 d). The results are compared among binary, ternary blend of OPC and also compound effect of all nano additives. Durability evaluation by adopting tests: electrical resistance, chloride permeability, mass changes before and after chemical treatment and the results are presented. The composites containing nano additives enhanced the durability, corrosion resistance and improved the micro structure. The morphological changes studied using SEM supported the pore structure improvement. The deterioration period lengthened in the hybrid composites especially the samples incorporated with 50% MK + combination of all nano materials at 5% each, showed better chloride impermeability, high sulfate resistance with minimum corrosion current.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Guidelines in compressive strength assessment of concrete modified with silica fume due to magnesium sulfate attack10.1016/j.conbuildmat.2012.04.075 ↗
2. Influence of titanium dioxide nanoparticles on the sulfate attack upon ordinary Portland cement and slag-blended mortars10.3390/ma11030356 ↗
3. Investigation of the influence of blast-furnace slag on the resistance of concrete against organic acid or sulphate attack by means of accelerated degradation tests10.1016/j.cemconres.2011.09.009 ↗
4. Sulfate attack research—whither now?10.1016/S0008-8846(01)00510-5 ↗
5. Mechanism of expansion of mortars immersed in sodium sulfate solutions10.1016/j.cemconres.2012.10.001 ↗
6. The confused world of sulfate attack on concrete10.1016/j.cemconres.2004.04.004 ↗
7. Marchand · 2003
8. Damage mechanisms of two-stage concrete exposed to chemical andphysical sulfate attack10.1016/j.conbuildmat.2017.01.112 ↗
9. Sulfate resistance of limestone cement concrete exposed to combined chloride and sulfate environment at low temperature10.1016/j.cemconcomp.2012.05.006 ↗
10. Microstructure of composite cements containing blast-furnace slag and silica nano-particles subjected to elevated thermally treatment temperature10.1016/j.conbuildmat.2015.05.042 ↗
11. Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag10.1016/j.conbuildmat.2011.11.013 ↗
12. Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag10.1016/j.cemconcomp.2012.02.005 ↗
13. Investigations on the development of powder concrete with nano- SiO2 particles10.1007/BF02823370 ↗
14. Effects of colloidal nanoSiO2 on fly ash hydration10.1016/j.cemconcomp.2012.06.013 ↗
15. The influence of nano-silica on the hydration of ordinary Portland cement10.1007/s10853-011-5881-1 ↗
16. Microstructural and microanalytical studies of sulfate attack. IV. Reactions of a slag cement paste with sodium and magnesium sulfate solutions10.1016/0008-8846(96)00089-0 ↗
17. Microstructural origins of cement paste degradation by external sulfate attack10.1016/j.conbuildmat.2015.07.186 ↗
18. Chemo-mechanical analysis of concrete cracking and degradation due to external sulfate attack: a meso-scale model10.1016/j.cemconcomp.2010.12.001 ↗
19. The effect of chloride on performance of cement mortars subjected to sulfate exposure at low temperature
20. Interaction between sulfate and chloride solution attack of concretes with and without fly ash10.1016/j.cemconres.2007.02.016 ↗
21. Alexander · 2012
22. ASTM C109/C109M-16a · 2016
23. Ground granulated blast furnace slag effect on the durability of ternary cementitious system exposed to combined attack of chloride and sulfate10.1016/j.conbuildmat.2017.10.062 ↗
24. Deterioration of mortars exposed to sulfate attack under electrical field Const10.1016/j.conbuildmat.2016.05.004 ↗
25. ASTM B963 · 2013
26. Effect of heat curing treatment on the drying shrinkage behavior and microstructure characteristics of mortar incorporating different content ground granulated blast-furnace slag10.1016/j.conbuildmat.2018.07.079 ↗
27. ASTM C1218 C1218M-15, Standard Test Method for Water-Soluble Chloride in Mortar and Concrete.
28. ASTM C1152 C1152M-04 · 2012
29. Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements10.1016/j.cemconcomp.2007.04.009 ↗
30. Combined effects of mineral admixtures and curing conditions on the Sorptivity coefficient of concrete10.1016/S0008-8846(03)00112-1 ↗
31. The influence of compaction pores on sorptivity and carbonation of concrete10.1016/j.conbuildmat.2006.02.010 ↗
32. Structure and properties of mortar and concrete with rice husk ash as partial replacement of ordinary Portland cement – a review10.1016/j.ijsbe.2017.07.004 ↗
33. Modification of cement-based materials with nanoparticles10.1016/j.cemconcomp.2012.06.012 ↗
34. Effect of nano-SiO2, nano-Al2O3and nano-Fe2O3 powders on compressive strengths andcapillary water absorption of cement mortar containing fly ash: a comparative study10.1016/j.enbuild.2012.12.014 ↗
35. Metakaolinite/TiO2 composite: photoactive admixture for building materials based on Portland cement binder10.1016/j.conbuildmat.2012.02.086 ↗
36. Characteristics of a thermally activated alumino-silicate pozzolanic material and its use in concrete10.1016/0008-8846(95)00167-0 ↗
37. The effect of metakaolin on the corrosion behavior of cement mortars10.1016/j.cemconcomp.2004.02.041 ↗
38. Effect of slag on the rheology of fresh self-compacted concrete10.1016/j.conbuildmat.2009.02.029 ↗
39. Compressive strength and corrosion evaluation of concretes containing pozzolana and perlite immersed in aggressive environments10.1016/j.conbuildmat.2018.05.190 ↗
40. Asian. Developing green cement paste using binary and ternary cementitious blends of low pozzolanic sewage sludge ash and colloidal nanosilica
41. Use of mineral admixtures to improve the resistance of limestone cement concrete against thaumasite form of sulfate attack10.1016/j.cemconcomp.2013.01.007 ↗
42. Effects of raised temperature of sulfate solutions on the sulfateresistance of mortars with and without silica fume10.1016/S0008-8846(98)00251-8 ↗
43. Influence of carbon nanofiber clustering in cement pastes exposed to sulfate attack10.1016/j.conbuildmat.2018.01.108 ↗
44. Compressive strength and corrosion evaluation of concretes containing pozzolana and perlite immersed in aggressive environments10.1016/j.conbuildmat.2018.05.190 ↗
45. Constr. Sulfate attack and reinforcement corrosion in plain and blended cements exposed to sulfate environments10.1016/0950-0618(95)00007-3 ↗
46. Effect of cement type on the corrosion of reinforcing steel bars exposed to acidic media using electrochemical techniques10.1016/j.cemconres.2004.10.015 ↗
47. Environmental effects on concrete using Ordinary and Pozzolana Portland cement10.1016/j.conbuildmat.2010.06.027 ↗
48. Sodium silicate-based, alkali-activated slag mortars Part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
49. Ground granulated blast furnace slag effect on the durability of ternary cementitious system exposed to combined attack of chloride and sulfate10.1016/j.conbuildmat.2017.10.062 ↗
50. Study on the resistance to seawater corrosion of the cementitious systems containing ordinary Portland cement or/and calcium aluminate cement10.1016/j.conbuildmat.2017.09.175 ↗
51. Investigation of relation between porosity, pore structure and chloride diffusion of fly ash and blended cement pastes10.1016/0008-8846(86)90049-9 ↗
52. Influence of metakaolin as supplementary cementing material on strength and durability of concretes10.1016/j.conbuildmat.2011.12.050 ↗
53. Engineering properties and durability of mortars containing new nano rice husk ash (RHA)
54. Electrical resistivity as microstructural parameter for the modelling of service life of reinforced concrete structures
55. Resistance of plain and blended cement mortars exposed to severe sulfate attacks10.1016/j.conbuildmat.2010.11.106 ↗
56. Concrete: aneco material that needs to be improved10.1016/j.jeurceramsoc.2011.11.012 ↗
57. Influence of nano-SiO2 addition on properties of hardened Cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
58. ASTM C1202 · 2017
59. Single and combined effects of nano-SiO2, nano-Al2O3 and nano-TiO2 on the mechanical, rheological and durability properties of self-compacting mortar containing fly ash10.1016/j.conbuildmat.2015.03.006 ↗
60. Silica concrete protection against corrosion of embedded steel10.1016/0008-8846(91)90013-8 ↗