Nano-polishing characteristics in vibration-assisted CMP of single-crystal silicon carbide via molecular dynamics simulations
Source abstract
Abstract
Vibration-assisted CMP can effectively improve the quality and efficiency of nano-polishing, but the mechanism of the interaction between the substrate, solution and abrasive atoms has not been thoroughly investigated. In this paper, a single-crystal silicon carbide material was taken as an example. The characteristics of atomic oxidation, removal and damage on nano-polished silicon carbide substrate under the assistance of chemical solution and abrasive vibration were studied using ReaxFF molecular dynamics simulation. The simulation results show that the vibration behavior of abrasive reduces the tangential and normal force, and evenly distributes the mechanical force in X, Y and Z directions. Moreover, the anisotropy of the atomic motion trajectory is stronger, the displacement vector is larger, and the distribution of displacement values is more dispersed. In addition, the phenomenon of atomic hybridization on the silicon carbide substrate is more obvious, the number of dangling bonds is significantly increased, the surface of the substrate formed more oxidation bonds, the removal of atoms is also effectively increased. At the same time, it is found that the larger the amplitude, the larger the potential energy of the substrate, the more dangling bonds contained, the more oxidation bonds formed, the more atoms removed, the better the uniformity of the force component. As the normal force is effectively reduced, the damage degree of substrate subsurface is reduced. Increasing the frequency can effectively activate the internal structure of the crystal, reduce the damage caused by mechanical abrasion, and facilitate the oxidation and removal of substrate atoms. However, if the frequency is too high, the interaction time between the substrate and the abrasive decreases, and the substrate atomic displacement is prone to elastic recovery, which inhibits atomic detachment from the substrate. Furthermore, the stress concentration generated by the accumulation of defects inside the substrate is more severe, making it difficult to release the residual stress. This paper will provide a new way to optimize the vibration-assisted CMP process and achieve non-damage nano-polishing of crystal materials through the study of the micro-oxidation and removal behavior of the substrate atoms.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Investigation of polishing pads impregnated with Fe and Al2O3 particles for single-crystal silicon carbide wafers10.3390/app6030089 ↗
2. Preliminary study on highly efficient polishing of 4H-SiC by utilization of anodic oxidation10.4028/www.scientific.net/AMR.1017.509 ↗
3. Mechanism of chemical and mechanical mutual promotion in photocatalysis-assisted chemical mechanical polishing for single-crystal SiC10.1177/09544062221117953 ↗
4. A review on precision polishing technology of single-crystal SiC
5. Kelsey · 2017
6. Novel abrasive-impregnated pads and diamond plates for the grinding and lapping of single-crystal silicon carbide wafers10.3390/app11041783 ↗
7. Green-chemical-jump-thickening polishing for silicon carbide10.3390/mi13101752 ↗
8. Ultraprecision CMP for sapphire, GaN, and SiC for advanced optoelectronics materials10.1016/j.cap.2012.02.016 ↗
9. Surface plasmon enhanced blue-green photoluminescence from carbon-rich amorphous silicon carbide films10.1016/j.jallcom.2011.11.001 ↗
10. A review on precision polishing technology of single-crystal SiC. crystals10.3390/cryst12010101 ↗
11. Chemical mechanical polishing (CMP) of SiC wafer using photo-catalyst incorporated pad10.1149/2.0061709jss ↗
12. Investigation of anodic oxidation mechanism of 4H-SiC (0001) for electrochemical mechanical polishing10.1016/j.electacta.2018.03.184 ↗
13. Chemical roles on Cu-slurry interface during copper chemical mechanical planarization10.1016/j.apsusc.2013.12.150 ↗
14. Effect of H2O2 on the CMP of the copper pattern wafer in the alkaline slurry
15. Effect of graphene additions on polishing of silicon carbide wafer with functional PU/silica particles in CMP slurry10.1142/S1793604719500668 ↗
16. Surface modification and microstructuring of 4H-SiC (0001) by anodic oxidation with sodium chloride aqueous solution10.1021/acsami.8b19557 ↗
17. Investigation on material removal mechanisms in photocatalysis-assisted chemical mechanical polishing of 4H-SiC wafers10.1007/s12541-021-00494-1 ↗
18. Atomistic mechanisms of chemical mechanical polishing of diamond (100) in aqueous H2O2/pure H2O: molecular dynamics simulations using reactive force field (ReaxFF)10.1016/j.commatsci.2018.10.041 ↗
19. Mechanism of material removal during nanofinishing of aluminium in aqueous KOH: a reactive molecular dynamics simulation study10.1016/j.commatsci.2018.09.042 ↗
20. Sub-nanoscale polishing of single crystal diamond (100) and the chemical behavior of nanoparticles during the polishing process10.1016/j.diamond.2019.107528 ↗
21. Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF simulations10.1016/j.ijmecsci.2020.106096 ↗
22. Influence mechanism of defects on the subsurface damage and structural evolution of diamond in CMP process10.1016/j.apsusc.2021.150638 ↗
23. Atomistic mechanisms of Si chemical mechanical polishing in aqueous H2O2: ReaxFF reactive molecular dynamics simulations10.1016/j.commatsci.2017.02.005 ↗
24. Atomic insight into tribochemical wear mechanism of silicon at the Si/SiO2 interface in aqueous environment: molecular dynamics simulations using ReaxFF reactive force field10.1016/j.apsusc.2016.08.082 ↗
25. Tang · 2020
26. Investigation of the atomistic behavior in nanofinishing single-crystal aluminium nitride with hydroxyl radical •OH environment10.1016/j.commatsci.2022.111770 ↗
27. Material removal and interactions between an abrasive and a SiC substrate: a molecular dynamics simulation study10.1016/j.ceramint.2019.11.006 ↗
28. Atomic removal mechanism of nano polishing for single-crystal AlN substrate via molecular dynamics10.1016/j.mssp.2022.107294 ↗
29. Development of electrical enhanced photocatalysis polishing slurry for silicon carbide wafer
30. Sticking coefficient and Si/C ratio of silicon carbide growth species on reconstructed 4H-SiC(000) surface by ab-initio calculations10.1016/j.vacuum.2022.111414 ↗
31. Morphology characterization of argon-mediated epitaxial graphene on C-face SiC10.1063/1.3442903 ↗
32. Record maximum oscillation frequency in C-face epitaxial graphene transistors10.1021/nl303587r ↗
33. Oxidation of silicon carbide by O2 and H2O: a ReaxFF reactive molecular dynamics study Part I
34. Investigation of vibration-assisted nano-grinding of gallium nitride via molecular dynamics10.1016/j.mssp.2020.105372 ↗
35. Molecular dynamics simulations of scratching characteristics in vibration-assisted nano-scratch of single-crystal silicon10.1016/j.apsusc.2021.149451 ↗
36. Investigation of the passive layer on a solid-state sintered silicon carbide ceramic formed in sulfuric acid
37. Role of ionic strength in chemical mechanical polishing of silicon carbide using silica slurries10.1016/j.colsurfa.2014.01.038 ↗
38. Cooperative roles of chemical reactions and mechanical friction in chemical mechanical polishing of gallium nitride assisted by OH radicals: tight-binding quantum chemical molecular dynamics simulations10.1039/D0CP05826B ↗
39. A molecular dynamics investigation into nanoscale scratching mechanism of polycrystalline silicon carbide10.1016/j.commatsci.2018.02.038 ↗
40. Molecular dynamics simulation of SiC removal mechanism in a fixed abrasive polishing process10.1016/j.ceramint.2019.04.180 ↗
41. Research on cutting performance of GH4169 in ultrasonic elliptical vibration turning based on ABAQUS