The effect of annealing treatment on the structural and optical properties of nanostructured CuxO films obtained by 3D printing
Source abstract
Abstract
This work studies the effect of post-growth annealing on the structural and optical properties of copper oxide films. Thin films were obtained by 3D printing on glass substrates using ink based on a suspension of CuO nanoparticles. To optimize their structural characteristics and optical quality, the samples were subjected to thermal annealing for 30 min in an argon environment at different temperatures from 250 °C to 500 °C. The obtained samples were studied by scanning electron microscopy, X-ray diffraction, energy dispersive X-Ray, Raman, optical and photoelectric spectroscopy. Based on the obtained results, the main structural and substructural characteristics of the films were established, such as lattice parameters, unit cell volume, texture, sizes of coherent scattering regions, and the level of microdeformation, as well as their dependence on the annealing temperature. In addition, the nature of optical absorption, band gap energies for various types of electronic transitions, and the optical quality of the studied nanostructured copper oxide films were determined. It was shown that CuO films annealed at 350 °C have the best crystalline and optical quality. It was established that at an annealing temperature above 400 °C, a phase transition from the tenorite phase to the cuprite phase is observed. At the same time, a change in the films' substructural characteristics is already observed at Ta = 400 °C. Optimal thermal annealing conditions of CuxO films for effective control of their phase composition have been established.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Laser-Ablation Synthesis of Nanoparticles
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Semiconductor thin films directly from minerals-study of structural, optical, and transport characteristics of Cu2O thin films from malachite mineral and synthetic CuO10.1016/j.tsf.2012.01.041 ↗
2. Synthesis of Cu2O from CuO thin films: optical and electrical properties10.1063/1.4919323 ↗
3. Density functional theory analysis of dopants in cupric oxide10.1063/1.4719059 ↗
4. Growth, characterization, and photovoltaic application of copper oxide thin films10.1016/j.tsf.2022.139381 ↗
5. Thermal oxidation impact on the optoelectronic and hydrogen sensing properties of p-type copper oxide thin films10.1016/j.materresbull.2021.111646 ↗
6. Improvement of CuO thin film properties for high mobility p-channel TFT applications
7. Nanoparticles of CuO thin films for room temperature NO2 gas detection: annealing time effect10.1016/j.matpr.2020.12.588 ↗
8. Improved properties of spray pyrolysed CuO nanocrystalline thin films10.1007/s10854-016-6043-7 ↗
9. Inkjet printing and low temperature sintering of CuO and CdS as functional electronic layers and Schottky diodes10.1039/c1jm11237f ↗
10. Low-thermal-budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks: potential for flexible printed electronics10.1021/acsami.5b12156 ↗
11. Fully inkjet-printed CuO sensor on flexible polymer substrate for alcohol vapours and humidity sensing at room temperature10.3390/s19143068 ↗
12. A brief review on 3D bioprinted skin substitutes10.1016/j.promfg.2020.05.115 ↗
13. Synthesis, characterization, thermal conductivity and sensitivity of CuO nanofluids10.1016/j.applthermaleng.2016.04.051 ↗
14. Synthesis and characterization of copper ink and direct printing of copper patterns by inkjet printing for electronic devices10.1016/j.cap.2020.04.003 ↗
15. Solution-processed p-type copper oxide thin-film transistors fabricated by using a one-step vacuum annealing technique10.1039/C5TC02384J ↗
16. Physical properties of copper oxide thin films prepared by sol–gel spin–coating method
17. Nanocrystalline solids10.1107/S0021889890011013 ↗
18. Swanson · 1953 · 2
19. UNITCELL : a nonlinear least-squares program for cell-parameter refinement and implementing regression and deletion diagnostics10.1107/S0021889896011673 ↗
20. Effect of annealing temperature on structural, optical and photocatalytic properties of CuO nanoparticles10.13171/mjc751911261230la ↗
21. Microstress, strain, band gap tuning and photocatalytic properties of thermally annealed and Cu-doped ZnO nanoparticles10.1007/s00339-016-0121-9 ↗
22. Morphological, structural, microstructural, chemical properties of nanostructured Cu2ZnSnS4 flexible thin films obtained by inkjet printing of polyol-mediated nanocrystals10.1016/j.jallcom.2020.155883 ↗
23. Growth kinetics and stoichiometry of ZnS films10.1016/j.solidstatesciences.2011.01.017 ↗
24. O. Dobrozhan, O. Diachenko, M. Kolesnyk, A. Stepanenko, S. Vorobiov, P. Baláž, S. Plotnikov, A.S. Opanasuyk, Morphological, structural and optical properties of Mg-doped ZnO nanocrystals synthesized using polyol process, Mater. Sci. Semicond. Process. https://doi.org/10.1016/j.mssp.2019.104595.10.1016/j.mssp.2019.104595 ↗
25. Electrical, structural and optical properties of Cd1-xZnxTe thick polycrystalline films10.1016/j.vacuum.2018.01.010 ↗
26. Influence of thermal annealing on microstructural, morphological, optical properties and surface electronic structure of copper oxide thin films10.1016/j.matchemphys.2014.06.047 ↗
27. Cuprous oxide thin films obtained by spray-pyrolysis technique10.1007/s10854-017-7980-5 ↗
28. The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures10.1038/s41598-022-14281-z ↗
29. Oxygen-diffusion-induced phase boundary migration in copper oxide thin films10.1103/PhysRevB.39.12367 ↗
30. Oxidation and reduction of copper oxide thin films10.1063/1.347417 ↗
31. Indirect phase transformation of CuO to Cu2O on a nanowire surface10.1021/acs.langmuir.6b00915 ↗
32. Characterisation of Cu2O, Cu4O3 , and CuO mixed phase thin films produced by microwave-activated reactive sputtering10.1016/j.vacuum.2017.08.005 ↗
33. Flower-shaped CuO nanostructures: synthesis, characterization and antimicrobial activity10.1016/j.jmst.2013.04.020 ↗
34. In situ Raman spectroscopy of copper and copper oxide surfaces during electrochemical oxygen evolution reaction: identification of CuIII oxides as catalytically active species10.1021/acscatal.6b00205 ↗
35. Vibrational properties of CuO and Cu4O3 from first-principles calculations, and Raman and infrared spectroscopy10.1021/jp303096m ↗
36. Sol-gel fabricated CuO thin film: characterization for device application10.21272/jnep.13(5).05018 ↗
37. A simple wet-chemical synthesis and characterization of CuO nanorods10.1007/s00339-002-1514-5 ↗
38. Pulsed laser deposited Cu2O/CuO films as efficient photocatalyst10.1016/j.tsf.2022.139080 ↗
39. Spectroscopic and electrical analysis of spray deposited copper oxide thin films
40. Cu2O/CuO heterojunction catalysts through atmospheric pressure plasma induced defect passivation10.1016/j.apsusc.2020.148571 ↗
41. Oxide film formation and oxygen adsorption on copper in aqueous media as probed by surface-enhanced Raman spectroscopy10.1021/jp983787c ↗
42. Surface-enhanced Raman spectroscopic observation of two kinds of adsorbed OH− ions at copper electrode10.1016/S0013-4686(00)00434-5 ↗
43. Copper(I) oxide nanocrystals – one step synthesis, characterization, formation mechanism, and photocatalytic properties10.1002/ejic.201201382 ↗
44. Phase transition of Cu2O to CuO nanocrystals by selective laser heating10.1016/j.mssp.2016.01.021 ↗
45. Electrochemically activated copper electrodes10.1149/1.2746805 ↗
46. Correlation of intrinsic point defects and the Raman modes of cuprous oxide10.1103/PhysRevB.90.045203 ↗
47. Temperature dependence of the band gap of high optical quality CdS:Dy thin films based on exciton spectra10.1088/2053-1591/aae298 ↗
48. Electronic structures of Cu2O, Cu4O3, and CuO: a joint experimental and theoretical study10.1103/PhysRevB.94.245418 ↗
49. Band structure and phase stability of the copper oxides Cu2O, CuO, and Cu4O310.1103/PhysRevB.87.115111 ↗
50. Structural and optical properties of CuO thin films synthesized using spray pyrolysis method10.3390/coatings11111392 ↗
51. A novel approach for the evaluation of band gap energy in semiconductors10.1023/A:1015033901163 ↗
52. Rock-salt CdZnO as a transparent conductive oxide10.1063/1.5048771 ↗
53. Semiconductor band gap localization via Gaussian function10.1088/0268-1242/27/10/105016 ↗
54. RF sputter-deposited nanostructured CuO films for micro-supercapacitors
55. Synchronic coupling of Cu2O(p)/CuO(n) semiconductors leading to Norfloxacin degradation under visible light: kinetics, mechanism and film surface properties10.1016/j.jcat.2017.06.036 ↗