journal article·2024-11

Brief overview of the impact of thermal stress on the reliability of through silicon via: Analysis, characterization, and enhancement

Shuiquan Tang, Jieshi Chen, Yi Bo Hu, Chun Yu, Hao Lu, Shuye Zhang, Kai Xiong

Publisher page

Abstract

Three-dimensional (3D) integration is considered an effective approach to extend and expand Moore`s Law. Among them, Through-Silicon Via (TSV) technology provides mechanical support, heat conduction, and electrical connections for vertically stacked chips. The multilayer interface structure of TSV and the significant differences in the coefficient of thermal expansion (CTE) between layers can lead to complex thermal stress in TSV structures under heating conditions, which can degrade the performance of Three-Dimensional Integrated Circuits (3D ICs). This article systematically summarizes the current research status of copper pillar extrusion protrusions, Cu/Si interface integrity damage, and carrier mobility changes caused by thermal stress, focusing on the failure mechanisms and models of each aspect, elucidating the influencing factors and potential destructive failures. It then outlines and compares the advantages and disadvantages of micro-Raman spectroscopy, bending beam technology, and synchrotron X-ray microdiffraction technology in characterizing thermal stress in TSV structures. Characterizing thermal stress is beneficial for determining stress distribution and reliability risks of TSV. Finally, based on the analysis of the reliability impacts of the three major aspects mentioned above, measures to reduce the reliability impacts of thermal stress from the perspectives of heat dissipation, structure, materials, and processes in recent years are summarized. This article aims to deepen researchers` understanding of the main failure modes caused by thermal stress on TSV structures and provide theoretical guidance for building stable and reliable TSV structures.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Fifty Years of moore's Law10.1109/TSM.2010.2096437 ↗
2. Understanding EUV Lithography: the technology that enables extension of Moore's Law10.1117/2.2201807.03 ↗
3. Challenges and recent prospectives of 3D heterogeneous integration
4. Extreme ultraviolet lithography and three dimensional integrated circuit—a review10.1063/1.4863412 ↗
5. Overview and outlook of through‐silicon via (TSV) and 3D integrations10.1108/13565361111127304 ↗
6. Three-dimensional integrated circuit (3D IC) key technology: through-silicon via (TSV)10.1186/s11671-017-1831-4 ↗
7. Heat dissipation assessment of through silicon via (TSV)-based 3D IC packaging for CMOS image sensing10.1016/j.microrel.2015.12.028 ↗
8. Optimization of Cu protrusion of wafer-to-wafer hybrid bonding for HBM packages application10.1016/j.mssp.2022.107063 ↗
9. An optimized 3D-stacked memory architecture by exploiting excessive, high-density TSV bandwidth
10. Three-dimensional switchbox multiplexing in emerging 3D-FPGAs to reduce chip footprint and improve TSV usage10.1016/j.vlsi.2015.01.007 ↗
11. A modified MEMS-casting based TSV filling method with universal nozzle piece that uses surface trenches as nozzles
12. Development and evaluation of 3-D SiP with vertically interconnected through silicon vias (TSV)
13. Microsystems using three-dimensional integration and TSV technologies: fundamentals and applications10.1016/j.mee.2019.03.009 ↗
14. A short review of through-silicon via (TSV) interconnects: metrology and analysis10.3390/app13148301 ↗
15. High aspect ratio silicon etch: a review10.1063/1.3474652 ↗
16. A review on the fabrication and reliability of three-dimensional integration technologies for microelectronic packaging: through-Si-via and solder bumping process10.3390/met11101664 ↗
17. Copper deep via filling with selective accelerator deactivation by polyethyleneimine10.1149/2.036312jes ↗
18. Cu bottom-up filling for through silicon vias with growing surface established by the modulation of leveler and suppressor10.1149/2.037312jes ↗
19. Superconformal nickel deposition in through silicon vias: experiment and prediction10.1149/2.0911807jes ↗
20. An overview of through-silicon-via technology and manufacturing challenges10.1016/j.mee.2014.10.019 ↗
21. Plasticity mechanism for copper extrusion in through-silicon vias for three-dimensional interconnects10.1063/1.4833020 ↗
22. Cu protrusion of different through-silicon via shapes under annealing process10.1007/s11665-021-05775-4 ↗
23. A study of the global and local Cu protrusion in Cu-filled through silicon vias under heat treatment
24. A study of thermo-mechanical stress and its impact on through-silicon vias10.1088/0960-1317/18/7/075018 ↗
25. Effects of SiO2 film thickness and operating temperature on thermally-induced failures in through-silicon-via structures10.1016/j.microrel.2018.02.006 ↗
26. Effect of silicon anisotropy on interfacial fracture for three dimensional through-silicon-via (TSV) under thermal loading10.1016/j.engfracmech.2019.01.030 ↗
27. A 90-nm logic technology featuring strained-silicon10.1109/TED.2004.836648 ↗
28. Uniaxial-process-induced strained-Si: extending the CMOS roadmap10.1109/TED.2006.872088 ↗
29. Comparison between high-field piezoresistance coefficients of Si metal-oxide-semiconductor field-effect transistors and bulk Si under uniaxial and biaxial stress10.1063/1.2936890 ↗
30. Effect of thermal mechanical behaviors of Cu on stress distribution in Cu-filled through-silicon vias under heat treatment10.1007/s11664-017-5885-y ↗
31. Study on the relationship between Cu protrusion behavior and stresses evolution in the through-silicon via characterized by in-situ μ-Raman spectroscopy10.1016/j.microrel.2020.113949 ↗
32. Interfacial transfer and phase evolution between Cu and Sn solder doped with Cu, Ag and Ni: experimental and theoretical investigations10.1007/s00339-020-03846-2 ↗
33. Effects of solder thickness on interface behavior and nanoindentation characteristics in Cu/Sn/Cu microbumps10.1007/s40194-022-01261-0 ↗
34. Influence of annealing conditions on the mechanical and microstructural behavior of electroplated Cu-TSV10.1088/0960-1317/20/4/045032 ↗
35. Effect of copper TSV annealing on via protrusion for TSV wafer fabrication10.1007/s11664-012-2117-3 ↗
36. Study on Cu protrusion of through-silicon via10.1109/TCPMT.2013.2252955 ↗
37. Interface-related reliability challenges in 3-D interconnect systems with through-silicon vias10.1007/s11837-011-0179-y ↗
38. Interfacial effects during thermal cycling of Cu-filled through-silicon vias (TSV)10.1007/s11664-011-1726-6 ↗
39. Optimization and characterization of the metal cap layout above through-silicon via to improve copper dishing and protrusion effect for the application of 3-D integrated circuits10.1109/TCPMT.2018.2858286 ↗
40. Modeling copper plastic deformation and liner viscoelastic flow effects on performance and reliability in through silicon via (TSV) fabrication processes10.1109/TDMR.2019.2940718 ↗
41. Study of stresses and plasticity in through-silicon via structures for 3D interconnects by X-ray micro-beam diffraction10.1109/TDMR.2014.2310705 ↗
42. Effect of substrate surface on electromigration-induced sliding at hetero-interfaces10.1088/0022-3727/46/15/155303 ↗
43. Influence of electric current on diffusionally accommodated sliding at hetero-interfaces10.1016/j.actamat.2010.12.011 ↗
44. Study of the effect and mechanism of a cap layer in controlling the statistical variation of via extrusion
45. The effective control of Cu through-silicon via extrusion for three-dimensional integrated circuits by a metallic cap layer10.1016/j.scriptamat.2019.01.029 ↗
46. Evaluation of Cu-TSV barrier materials as a solution to copper protrusion10.1007/s11664-019-07894-0 ↗
47. Statistical distribution of through-silicon via Cu pumping10.1109/TDMR.2017.2738154 ↗
48. Synchrotron X-ray microdiffraction investigation of scaling effects on reliability for through-silicon vias for 3-D integration10.1109/TDMR.2019.2933794 ↗
49. Processing effect on via extrusion for TSVs in three-dimensional interconnects: a comparative study10.1109/TDMR.2016.2591945 ↗
50. Heating rate dependence of the mechanisms of copper pumping in through-silicon vias10.1007/s11664-018-6805-5 ↗
51. Impact of post-plating anneal and through-silicon via dimensions on Cu pumping
52. Cu pumping in TSVs: effect of pre-CMP thermal budget10.1016/j.microrel.2011.06.003 ↗
53. Elimination of the axial deformation problem of Cu-TSV in 3D integration10.1063/1.3527128 ↗
54. Protrusion of through-silicon-via (TSV) copper with double annealing processes10.1007/s11664-022-09503-z ↗
55. A detailed failure analysis examination of the effect of thermal cycling on Cu TSV reliability10.1109/TED.2013.2291297 ↗
56. Through silicon via fabrication with low-κ dielectric liner and its implications on parasitic capacitance and leakage current10.7567/JJAP.51.04DB03 ↗
57. An experimental study on the TSV reliability: electromigration (EM) and time dependant dielectric breakdown (TDDB)
58. TSV stress-aware full-chip mechanical reliability analysis and optimization for 3D IC10.1145/2494536 ↗
59. Failure analysis of through-silicon vias in free-standing wafer under thermal-shock test10.1016/j.microrel.2012.06.140 ↗
60. Analysis on annealing-induced stress of blind-via TSV using FEM10.1007/s11465-017-0457-7 ↗
61. Performanace and reliability analysis of 3D-integration structures employing through Silicon via (TSV)
62. Failure mechanisms and optimum design for electroplated copper Through-Silicon Vias (TSV)
63. Impact of near-surface thermal stresses on interfacial reliability of through-silicon vias for 3-D interconnects10.1109/TDMR.2010.2068572 ↗
64. The experimental analysis and the mechanical model for the debonding failure of TSV-Cu/Si interface10.1016/j.microrel.2018.08.005 ↗
65. Thermomechanical failure analysis of through-silicon via interface using a shear-lag model with cohesive zone10.1109/TDMR.2013.2261300 ↗
66. Characterizing interfacial sliding of through-silicon-via by nano-indentation10.1109/TDMR.2017.2681580 ↗
67. Energy release rate investigation for through silicon vias (TSVs) in 3D IC integration
68. Energy release rate estimation for through silicon vias in 3-D IC integration10.1109/TCPMT.2013.2283503 ↗
69. An ion beam layer removal method of determining the residual stress in the as-fabricated TSV-Cu/TiW/SiO2/Si interface on a nanoscale10.1016/j.microrel.2020.113826 ↗
70. Reliability evaluation of copper (Cu) through-silicon vias (TSV) barrier and dielectric liner by electrical characterization and physical failure analysis (PFA)
71. Interlevel dielectric failures in copper/low-k structures10.1109/TDMR.2004.831989 ↗
72. New insights into fracture of Si in Cu-filled through silicon via during and after thermal annealing10.1016/j.engfracmech.2020.107281 ↗
73. Effects of copper migration on the reliability of through-silicon via (TSV)10.1109/TDMR.2018.2880286 ↗
74. Impact of Cu diffusion from Cu through-silicon via (TSV) on device reliability in 3-D LSIs evaluated by transient capacitance measurement
75. Ultra-thin dielectric breakdown in devices and circuits: a brief review10.1016/j.microrel.2014.10.019 ↗
76. Failure mechanism of copper through-silicon vias under biased thermal stress10.1016/j.tsf.2013.05.039 ↗
77. Effect of temperature cycling on the leakage mechanism of TSV liner10.1016/j.microrel.2022.114889 ↗
78. Reliability challenges for barrier/liner system in high aspect ratio through silicon vias10.1016/j.microrel.2014.07.077 ↗
79. Dielectric liner reliability in via-middle through silicon vias with 3 Micron diameter10.1016/j.mee.2016.01.033 ↗
80. Stress-driven 3D-IC placement with TSV keep-out zone and regularity study
81. Piezoresistance effect in germanium and silicon10.1103/PhysRev.94.42 ↗
82. A holistic analysis of circuit performance variations in 3-D ICs with thermal and TSV-induced stress considerations10.1109/TVLSI.2014.2335154 ↗
83. TSV stress aware timing analysis with applications to 3D-IC layout optimization
84. Impact of mechanical stress on the full chip timing for through-silicon-via-based 3-D ICs10.1109/TCAD.2013.2237770 ↗
85. Effect of thermal stresses on carrier mobility and keep-out zone around through-silicon vias for 3-D integration10.1109/TDMR.2012.2194784 ↗
86. Investigation on Cu TSV-induced KOZ in silicon chips: simulations and experiments10.1109/TED.2013.2263298 ↗
87. Thermo-mechanical reliability of 3-D ICs containing through silicon vias
88. TSV stress-aware full-chip mechanical reliability analysis and optimization for 3D IC10.1145/2494536 ↗
89. On the mechanical stresses of Cu through-silicon via (TSV) samples fabricated by SK Hynix vs. SEMATECH – enabling robust and reliable 3-D interconnect/integrated circuit (IC) technology10.1016/j.proeng.2015.09.242 ↗
90. Characterization of thermal stresses in through-silicon vias for three-dimensional interconnects by bending beam technique10.1063/1.3678020 ↗
91. Non-destructive micro-Raman analysis of Si near Cu through silicon via10.1007/s13391-017-6349-5 ↗
92. Thermo-mechanical characterization of copper through-silicon vias (Cu-TSVs) using micro-Raman spectroscopy and atomic force microscopy10.1016/j.mee.2015.02.004 ↗
93. Stress/strain characterization in electronic packaging by micro-Raman spectroscopy: a review10.1016/j.microrel.2021.114045 ↗
94. Temperature-dependent thermal stress determination for through-silicon-vias (TSVs) by combining bending beam technique with finite element analysis
95. In-depth Raman spectroscopy analysis of various parameters affecting the mechanical stress near the surface and bulk of Cu-TSVs
96. Dimension and liner dependent thermomechanical strain characterization of through-silicon vias using synchrotron x-ray diffraction
97. Investigation of thermo-mechanical stresses and reliability of 3D die-stack structures by synchrotron x-ray micro-diffraction
98. Measurement of stresses in Cu and Si around through-silicon via by synchrotron X-ray microdiffraction for 3-dimensional integrated circuits10.1016/j.microrel.2011.10.016 ↗
99. A dedicated superbend x-ray microdiffraction beamline for materials, geo-, and environmental sciences at the advanced light source10.1063/1.3096295 ↗
100. Fast thermal analysis on GPU for 3D ICs with integrated microchannel cooling10.1109/TVLSI.2012.2211050 ↗