Preparation and characterization of a high-efficiency photoelectric detector composed of hexagonal Al2O3/TiO2/TiN/Au nanoporous array
Source abstract
Abstract
The light sensitivity of a novel TiO 2 /TiN-nanotubes-based photodetector is improved by coating it with Au nanoparticles. Using a porous aluminum oxide template (PAOT), TiO 2 /TiN nanotubes were produced. A two-step anodization procedure was used to produce the PAOT using the Ni-imprinting method. Atomic layer deposition and magnetron sputtering were used to deposit the TiO 2 /TiN layers. X-ray diffraction, scanning electron microscopy, and reflection/absorption optical spectroscopy were used to characterize the PAOT, PAOT/TiO 2/TiN, and PAOT/TiO 2/TiN/Au. With a pore diameter of 320 nm and an interpore distance of 61 nm, the PAOT exhibits a high-ordered hexagonal nanoporous array. Following the deposition of TiN on the PAOT/TiO 2, the bandgap of PAOT/TiO 2 reduced from 3.1 to 2.2 eV, indicating increased visible light absorption. The photoresponsivity values for PAOT/TiO 2/TiN and PAOT/TiO 2/TiN/Au photodetectors are almost the same (453 mA W −1) at 390 nm. Without and with Au coating, the photoresponsivity values at 636 nm are 392 and 438 mA W −1, suggesting a considerable increase in the Vis/NIR range. Moreover, the detectivity values for the photodetector are enhanced after Au coating, in which the detectivity value for photodetectors are 8.74 × 10 9 and 8.75 × 10 12 Jones at 636 nm before and after Au coating, respectively. While the detectivity values are 8.86 × 10 12 Jones for both photodetectors at 390 nm. As a result of the hot electrons from the TiN and Au layers, the constructed photodetector has a very high photoelectrical response, making it extremely promising as a broadband photodetector.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Ga2O3 and related materials · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Improved photoresponse of UV photodetectors by the incorporation of plasmonic nanoparticles on GaN through the resonant coupling of localized surface plasmon resonance10.1007/s40820-020-00437-x ↗
2. New concept ultraviolet photodetectors10.1016/j.mattod.2015.06.001 ↗
3. 2D lead dihalides for high-performance ultraviolet photodetectors and their detection mechanism investigation10.1002/smll.201702024 ↗
4. Photon counting based on solar-blind ultraviolet intensified complementary metal-oxide-semiconductor (ICMOS) for corona detection10.1109/JPHOT.2018.2876514 ↗
5. High-performance flexible ultraviolet photodetectors based on AZO/ZnO/PVK/PEDOT:PSS heterostructures integrated on human hair10.1021/acsami.9b07423 ↗
6. Photon-triggered nanowire transistors10.1038/nnano.2017.153 ↗
7. Giant UV photoresponse of a GaN nanowire photodetector through effective Pt nanoparticle coupling10.1039/C7TC00594F ↗
8. Nanoporous TiN/TiO2/alumina membrane for photoelectrochemical hydrogen production from sewage water10.3390/nano11102617 ↗
9. Plasmonic hybridization between two metallic nanorods10.1016/j.ijleo.2018.07.135 ↗
10. Tunability and sensing properties of plasmonic/1D photonic crystal10.1038/srep41983 ↗
11. Preparation and characterization of polyaniline and Ag/polyaniline composite nanoporous particles and their antimicrobial activities10.1007/s10924-017-0937-1 ↗
12. Ultrahigh responsivity UV photodetector based on Cu nanostructure/ZnO QD hybrid architectures10.1002/smll.201901606 ↗
13. Quasi-coherent thermal emitter based on refractory plasmonic materials10.1364/OME.5.002721 ↗
14. Estimation of transition metal nitride surface plasmon refractometer sensitivity
15. Optical, water splitting and wettability of titanium nitride/titanium oxynitride bilayer films for hydrogen generation and solar cells applications10.1016/j.mssp.2019.104704 ↗
16. Experimental and theoretical studies of hybrid multifunctional TiO2/TiN/TiO210.1016/j.ceramint.2019.06.145 ↗
17. Mesoporous TiN microspheres with hierarchical chambers and enhanced visible light-driven hydrogen evolution10.1002/cssc.201300221 ↗
18. Nafion-stabilised platinum nanoparticles supported on titaniumnitride: an efficient and durable electrocatalyst for phosphoric acidbased polymer electrolyte fuel cells10.1016/j.electacta.2013.07.140 ↗
19. TiO2/TiOxNY hollow mushrooms-like nanocomposite photoanode for hydrogen electrogeneration10.1007/s10934-019-00792-0 ↗
20. Minimal layer graphene/TiO2 nanotube membranes used for enhancement of UV photodetectors10.1016/j.matlet.2018.02.033 ↗
21. Fabrication and characterization of micro/nanoporous Cr film for sensing applications10.1016/j.micromeso.2014.07.022 ↗
22. Morphological and optical properties of ultra-thin nanostructured Cu films deposited by RF sputtering on Nanoporous anodic alumina substrate10.1049/mnl.2015.0563 ↗
23. Nanoporous chromium thin film for active detection of toxic heavy metals traces using surface-enhanced Raman spectroscopy10.1088/2053-1591/ab6b62 ↗
24. Fabrication of silver decorated anodic aluminum oxide substrate and its optical properties on surface-enhanced Raman scattering and thin film interference10.1021/la901521j ↗
25. A sensor of m-toluidine/m-cresol polymer film for detection of lead ions by potentiometric methods10.1166/sl.2016.3656 ↗
26. A sensor of m -cresol nanopolymer/Pt-electrode film for detection of lead ions by potentiometric methods10.1002/adv.21788 ↗
27. The structure and photoelectrochemical activity of Cr-doped PbS thin films grown by chemical bath deposition10.1039/C9RA11042A ↗
28. Graphite/rolled graphene oxide/carbon nanotube photoelectrode for water splitting of exhaust car solution10.1002/er.5501 ↗
29. Controlling the plasmonic properties of ultrathin TiN films at the atomic level10.1021/acsphotonics.7b01553 ↗
30. Tuning the plasmonic response of TiN nanoparticles synthesised by the transferred arc plasma technique10.1039/C7NR09309H ↗
31. Plasmonic TiN boosting nitrogen-doped TiO2 for ultrahigh efficient photoelectrochemical oxygen evolution10.1016/j.apcatb.2019.01.044 ↗
32. Rabia
33. Preparation and characterization of polyaniline and Ag/polyaniline composite nanoporous particles and their antimicrobial activities10.1007/s10924-017-0937-1 ↗
34. Effect of annealing temperature on the photoactivity of ITO/VO 2 (M)/Au film electrodes for water splitting10.1166/jnn.2020.17681 ↗
35. Controlled synthesis of CdS nanoflowers thin films for H2 electro-generation10.1016/j.mssp.2020.105307 ↗
36. Recent advances in solution-processed inorganic nanofilm photodetectors
37. TiCl4 surface-treated SnO2 photoanodes for self-powered UV photodetectors and dye-sensitized solar cells10.1080/10667857.2016.1267935 ↗
38. Interaction of oxygen with TiN (001): N↔O exchange and oxidation process10.1063/1.2743418 ↗
39. Stability of adsorbed water on TiO2-TiN interfaces. A first-principles and ab initio thermodynamics investigation10.1021/acs.jpcc.8b03520 ↗
40. Self-Powered broadband photodetector using plasmonic titanium nitride10.1021/acsami.6b00249 ↗
41. Broadband photodetector based on carbon nanotube thin film/single layer graphene Schottky junction
42. Fabrication of UV photodetector on TiO 2/diamond film10.1038/srep14420 ↗
43. Synthesis and characterization of biogenic iron oxides of different nanomorphologies from pomegranate peels for efficient solar hydrogen production10.1016/j.jmrt.2020.02.052 ↗
44. Conjuncted photo-thermoelectric effect in ZnO–graphene nanocomposite foam for self-powered simultaneous temperature and light sensing10.1038/s41598-020-68790-w ↗
45. Polarization enhanced charge transfer: dual-band GaN-based plasmonic photodetector
46. Efficient photoselectrochemical hydrogen production utilizing of APbI 3 (A = Na, Cs, and Li) perovskites nanorods
47. Graphite/rolled graphene oxide/carbon nanotube photoelectrode for water splitting of exhaust car solution10.1002/er.5501 ↗
48. Optimization of the active layer P3HT:PCBM for organic solar cell
49. Light intensity effects on photocatalytic water splitting with a titania catalyst10.1016/j.ijhydene.2013.02.147 ↗
50. Photocatalytic properties of PbS/graphene oxide/polyaniline electrode for hydrogen generation10.1038/s41598-017-14582-8 ↗
51. Broadband hot-electron collection for solar water splitting with plasmonic titanium nitride10.1002/adom.201601031 ↗
52. A localized surface plasmon resonance and light confinement-enhanced near-infrared light photodetector10.1002/lpor.201500179 ↗
53. Novel UV–visible photodetector in photovoltaic mode with fast response and ultrahigh photosensitivity employing Se/TiO2 nanotubes heterojunction10.1002/smll.201602448 ↗
54. Scalable-production, self-powered TiO2 nanowell-organic hybrid UV photodetectors with tunable performances10.1021/acsami.6b11012 ↗
55. Large scale, highly efficient and self-powered UV photodetectors enabled by all-solid-state n-TiO2 nanowell/p-NiO mesoporous nanosheet heterojunctions10.1039/C6TC03830A ↗
56. A highly responsive self-driven UV photodetector using GaN nanoflowers10.1002/aelm.201700036 ↗
57. Demonstration of high-responsivity epitaxial β-Ga2O3/GaN metal-heterojunction-metal broadband UV-A/UV-C detector10.7567/APEX.11.064101 ↗
58. All-MXene-based integrated membrane electrode constructed using Ti3C2Tx as an intercalating agent for high-performance desalination10.1021/acs.est.9b05759 ↗
59. Low-dimensional plasmonic photodetectors: recent progresses and future opportunities10.1002/adom.201900884 ↗
60. Yang · 2014
61. Giant improvement of the performance of ZnO nanowire photodetectors by Au nanoparticles10.1021/jp108320j ↗
62. High-detectivity multilayer MoS2 phototransistors with spectral response from ultraviolet to infrared10.1002/adma.201201909 ↗
63. Size controlled copper (I) oxide nanoparticles influence sensitivity of glucose biosensor10.3390/s17091944 ↗
64. Self-powered ZnS nanotubes/Ag nanowires MSM UV photodetector with high on/off ratio and fast response speed10.1038/s41598-017-05176-5 ↗
65. An efficient fast response and high-gain solar-blind flexible ultraviolet photodetector employing hybrid geometry10.1063/1.4876450 ↗
66. Plasmonic visible-NIR photodetector based on hot electrons extracted from nanostructured titanium nitride10.1063/1.5101009 ↗
67. Phase-junction Ag/TiO2 nanocomposite as photocathode for H2 generation10.1016/j.jmst.2020.12.052 ↗
68. Effect of plasmonic au nanoparticles on the photoactivity of polyaniline/indium tin oxide electrodes for water splitting10.1002/ep.13171 ↗