Effect of precursors on ZnO nanoparticles to enhance the level-III ridge details of LFPs and anti-counterfeiting applications
Source abstract
Abstract
Comparative analysis for the combustion-based synthesis of zinc oxide nanoparticles (NPs) utilizing various precursors of zinc was reported. l-ascorbic acid extraction was used as a fuel for the combustion process. The sizes, morphologies, structural details and purity of samples were examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffractometry (XRD). XRD pattern matches with the standard JCPDS card of ZnO with good crystallite size. The average crystallite size of the NPs was confirmed the nano-regime. Variations in morphological structures and the energy band gap variation with the change in precursors was reported. Using a powder-dusting technique, on separate surfaces, level-III features of the fingerprints produced by these NPs without any background noise. The suggested powder composition was easy to make and effective for producing latent finger prints on a variety of dry and wet surfaces. In the area of counterfeit prevention, the fluorescent ink has several potential applications. Invisible security ink was developed for anti-counterfeiting applications based on the UV fluorescence feature of ZnO NPs. The fluorescent invisible security ink for screen printing was evaluated and proved to be stable on a variety of microporous papers. The new strategy adopted here lowers the cost of ink by using rare earth free ZnO NPs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Forensic Fingerprint Detection Methods · Mercury impact and mitigation studies · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Centella asiatica mediated solution combustion synthesis of a novel Pr3+ doped Lanthanum Oxyfluoride for display and visualization of latent fingerprints and anticounterfeiting applications
2. Effect of Li+ coodoping on the photoluminescence of novel green emitting BiOCl: Tb3+ nanophosphors for display, visualization of latent fingerprints and anticounterfeiting applications10.1016/j.jssc.2020.121418 ↗
3. Fabrication of flux supported SrTiO3:Eu3+ fluorescent powders: new prospective of dual mode, ink-free data security applications
4. New design of highly sensitive AIE based fluorescent imidazole derivatives: probing of sweat pores and anti-counterfeiting applications10.1016/j.msec.2019.03.089 ↗
5. Mini submersible pump assisted sonochemical reactors: large-scale synthesis of zinc oxide nanoparticles and nanoleaves for antibacterial and anti-counterfeiting applications10.1016/j.ultsonch.2018.12.020 ↗
6. Luminescent nanohybrid of ZnO quantum dot and cellulose nanocrystal as anti-counterfeiting ink10.1016/j.carbpol.2021.117864 ↗
7. Synthesis and performance of ZnO quantum dots water-based fuorescent ink for anti-counterfeiting applications
8. Surface functionalized inorganic phosphor by grafting organic antenna for long term preservation of latent fingerprints and data-security applications10.1016/j.jcis.2021.05.029 ↗
9. Pivotal role of fluxes in BaTiO3:Eu3+ nano probes for visualization of latent fingerprints on multifaceted substrates and anti-counterfeiting applications10.1016/j.microc.2018.10.020 ↗
10. Sonochemically assisted hollow/solid BaTiO3:Dy3+ microspheres and their applications in effective detection of latent fingerprints and lip prints
11. Versatile core-shell SiO2@SrTiO3:Eu3+, Li+ nanopowders as fluorescent label for the visualization of latent fingerprints and anti-counterfeiting applications10.1016/j.cej.2017.06.093 ↗
12. SiO2@LaOF:Eu3+ core-shell functional nanomaterials for sensitive visualization of latent fingerprints and WLED applications10.1016/j.jcis.2018.01.093 ↗
13. Ultrasound assisted Eu3+–doped strontium titanate nanophosphors: labeling agent useful for visualization of latent fingerprints10.1016/j.powtec.2021.02.006 ↗
14. A critical review of fundamentals and applications of electrochemical development and imaging of latent fingerprints10.1016/j.electacta.2021.138798 ↗
15. Commonly available, everyday materials as non-conventional powders for the visualization of latent fingerprints10.1016/j.forc.2021.100339 ↗
16. Nanoparticles as fingermark sensors10.1016/j.trac.2021.116378 ↗
17. Highly stable cesium lead bromide perovskite nanocrystals for ultrasensitive and selective latent fingerprint detection10.1016/j.aca.2021.338850 ↗
18. Enhancement in the photocatalytic and antimicrobial properties of ZnO nanoparticles by structural variations and energy bandgap tuning through Fe and Co co-doping10.1016/j.ceramint.2020.12.234 ↗
19. Optical properties of ZnO nanostructures10.1002/smll.200600134 ↗
20. Development of latent prints exposed to destructive crime scene conditions using wet powder suspensions, Egypt
21. Development of latent fingermarks on various surfaces using ZnO-SiO2 nanopowder10.1111/1556-4029.12890 ↗
22. Rapid visualization of fingerprints on various surfaces using ZnO superstructures prepared via simple combustion route
23. Synthesis and characterization of fluorescent N-CDs/ZnO NPs nanocomposite for latent fingerprint detection by using powder brushing method10.1016/j.arabjc.2019.01.004 ↗
24. Metal-containing nanoparticles and nano-structured particles in fingermark detection10.1016/j.forsciint.2008.04.027 ↗
25. All in one photoluminescent Janus Nanoparticles for Smart technologies: organic light emitting diodes, anticounterfeiting and optical sensors10.1016/j.eurpolymj.2023.111873 ↗
26. Dual-color photoluminescent functionalized nanoparticles for static- dynamic anticounterfeiting and encryption: first collaboration of Spiropyran and Coumarin10.1021/acsami.2c22532 ↗
27. Photoluminescent Janus Oxazolidine nanoparticles for development of organic light-emitting diodes, anticounterfeiting, information encryption and optical detection of scractch10.1016/j.jcis.2022.10.013 ↗
28. Photoluminescent and chromic nanoparticles for anticounterfeiting technologies: recent advances and future challenges10.1021/acsnano.0c07289 ↗
29. Application of nanoparticles for the enhancement of latent fingerprints10.1039/b618966k ↗
30. The development of latent fingerprints by zinc oxide and tin oxide nanoparticles prepared by precipitation method10.1063/1.5032584 ↗
31. Green Synthesis of Ba1− xSrxTiO3 ceramic nanopowders by sol-gel combustion method using lemon juice as a fuel: tailoring of Microstructure, ferroelectric, dielectric and electrical properties10.1016/j.optmat.2020.110664 ↗
32. McMurdie · Powder Diffr. · 1986 · 1 · 7610.1017/S0885715600011829 ↗
33. Zinc oxide nanoparticles for detection of latent fingermarks on nonporous surfaces
34. A novel chemical route to prepare ZnO nanoparticles10.1016/j.matlet.2005.12.046 ↗
35. Photoluminescence and time resolved photoluminescence properties in as grown ZnO thin films prepared by DC reactive sputtering for optoelectronic devices10.1016/j.mejo.2021.105153 ↗
36. Defect engineering of ZnO nanoparticles for bioimaging applications10.1021/acsami.9b01582 ↗
37. Visible light responsive photocatalytic activity significantly enhanced by active [VZn+V0+] defects in self assembled ZnO nanoparticles10.1021/acs.inorgchem.0c03327 ↗
38. Complex features of the photoluminescence from ZnO nanorods grown by vapor-phase transport method10.1016/j.mssp.2021.105783 ↗
39. Composition and excitation wavelength dependent photoluminescence color tuning in nanocomposite of PMMA and ZnO nanorods for PLED10.1016/j.jallcom.2021.160450 ↗
40. On the optical band gap of zinc oxide10.1063/1.367375 ↗
41. A comparative study on the influence of monovalent, divalent and trivalent doping on the structural, optical and photoluminescence properties of Zn0.96T0.04O (T: Li+, Ca2+ & Gd3+) nanoparticles10.1016/j.ceramint.2019.04.048 ↗
42. A comprehensive study on the impact of Gd substitution on structural, optical and magnetic properties of ZnO nanocrystals10.1016/j.jallcom.2021.159142 ↗
43. Nayak, Influence of dopant concentration on powder morphology and photoluminescence characteristics of red-emitting Eu3+-doped ZnO10.1016/j.ijleo.2021.167870 ↗
44. Mass-production of ZnO nanoparticles by precipitation in a rotating packed bed: effect of zinc salt10.1016/j.jmrt.2020.05.040 ↗
45. Preparation of fluorescent bisamides: a new class of fingermarks developers10.1016/j.cdc.2021.100680 ↗
46. Preparation of novel magnetic nanomaterials based on “facile coprecipitation” for developing latent fingerprints (LFP) in crime scenes10.1021/acsomega.1c04208 ↗
47. Surface modification of Mg2InSbO6:Eu3+ phosphors and applications for white light-emitting diodes and visualization of latent fingerprint
48. Influence of Cu doping on ZnO nanoparticles for improved structural, optical, electrochemical properties and their applications in efficient detection of latent fingerprints
49. Rapid visualization of fingerprints on various surfaces using ZnO superstructures prepared via simple combustion route
50. Synthesis and characterization of zinc oxide nanoparticles for application in the detection of fingerprints10.4028/www.scientific.net/MSF.916.232 ↗
51. Green mediated synthesis of lanthanum doped zinc oxide: study of its structural, optical and latent fingerprint application10.1016/j.jre.2020.07.012 ↗
52. Zinc oxide nanoparticles for detection of latent fingermarks on nonporous surfaces
53. The development of latent fingerprints by zinc oxide and tin oxide nanoparticles prepared by precipitation technique10.1063/1.5032584 ↗
54. An evaluation of nanostructured zinc oxide as a fluorescent powder for fingerprint detection10.1007/s10853-007-2178-5 ↗
55. Synthesis and characterization of fluorescent CDs/ZnONPs nanocomposite for latent fingerprint detection by using power brushing method10.1016/j.arabjc.2019.01.004 ↗
56. Development of latent fingerprint by ZnO deposition10.1016/j.forsciint.2010.07.035 ↗
57. Development of latent fingermarks on various surfaces using ZnO-SiO2 nanopowder10.1111/1556-4029.12890 ↗
58. Zinc oxide nanoparticles for detection of latent fingermarks on nonporous surfaces
59. Synthesis and performance of ZnO quantum dots water-based fluorescent ink for anti-counterfeiting applications10.1038/s41598-021-85468-z ↗
60. Luminescent nanohybrid of ZnO quantum dot and cellulose nanocrystal as anti-counterfeiting ink10.1016/j.carbpol.2021.117864 ↗
61. Mini submersible pump assisted sonochemical reactors: large-scale synthesis of zinc oxide nanoparticles and nanoleaves for antibacterial and anti-counterfeiting applications, Ultrasonic10.1016/j.ultsonch.2018.12.020 ↗
62. Lanthanum-doped ZnO quantum dots with greatly enhanced fluorescent quantum yield10.1039/c2jm00040g ↗