journal article·2022-11

Numerical and experimental analysis of nanosecond laser ablation of SiC

Ya Deng, Yufeng Zhou, Yumin Zhang, Dongkangkang Chen, Xiaolin Zhou

Publisher page

Abstract

This work presents a fundamental study on the melting threshold, ablation morphology and removal mechanism of single-crystal SiC during nanosecond laser processing. A thermal model was established to investigate the thermal behavior of single-crystal SiC at different wavelengths and pulse durations, and to predict the size and cross-sectional profile of ablation hole. The phase transitions and thermophysical parameters variation of silicon carbide with temperature were considered in the numerical analysis. To verify the reliability of the established model, the simulation data were compared with experimentally measured ablation depth under the same operating parameters. The investigation results indicated that the melting threshold of crystalline material increased with the increase of wavelength under the studied condition and was approximately linear distribution. Surface evaporation should be the dominant removal mechanism for nanosecond laser pulse ablation of SiC. By comparing the diameter and depth of ablated hole obtained from experiment and simulation calculation, it is found that the experimental/modeling coupling method had good consistency. Therefore, the established model can accurately simulate the interaction process between nanosecond laser pulse and silicon carbide.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Laser-induced spectroscopy and plasma · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Silicon carbide as a platform for power electronics10.1126/science.1168704 ↗
2. Electronic transport in epitaxial 4H-SiC based Schottky diodes modified selectively by swift heavy ions10.1016/j.mssp.2020.105108 ↗
3. Solvent-assisted laser drilling of silicon carbide10.1111/j.1744-7402.2010.02575.x ↗
4. Time-resolved experimental study of silicon carbide ablation by infrared nanosecond laser pulses10.1115/1.4003618 ↗
5. Laser micro machining of 3C–SiC single crystals10.1016/j.mee.2006.01.064 ↗
6. SiC via holes by laser drilling10.1007/s11664-004-0206-7 ↗
7. Excimer laser ablation of single crystal 4H-SiC and 6H-SiC wafers10.1007/s10853-010-4920-7 ↗
8. Mechanism of nanosecond laser drilling process of 4H-SiC for through substrate vias10.1007/s00339-017-0986-2 ↗
9. Finite element model of laser-generated surface acoustic waves in coating-substrate system10.1063/1.1639142 ↗
10. Numerical simulation of laser-induced transient temperature field in film-substrate system by finite element method10.1016/S0017-9310(03)00345-4 ↗
11. Critical assessment of thermal models for laser sputtering at high fluences10.1063/1.114912 ↗
12. A self-closed thermal model for laser shock peening under the water confinement regime configuration and comparisons to experiments10.1063/1.1915537 ↗
13. Laser-pulse sputtering of aluminum: vaporization, boiling, superheating, and gas-dynamic effects10.1103/PhysRevE.50.4716 ↗
14. Cengel · 2011
15. Thermal expansion and thermal expansion anisotropy of SiC polytypes10.1111/j.1151-2916.1987.tb05673.x ↗
16. Thermal expansion of the hexagonal (6H) polytype of silicon carbide10.1111/j.1151-2916.1986.tb07385.x ↗
17. Solubility of carbon in silicon and germanium10.1063/1.1730236 ↗
18. Laser-induced surface drilling of silicon carbide10.1016/S0169-4332(01)00330-0 ↗
19. Thermal conductivity of 4H-SiC single crystals10.1063/1.4790134 ↗
20. Experimental and theoretical analysis of the high temperature thermal conductivity of monocrystalline SiC10.4028/www.scientific.net/MSF.264-268.623 ↗
21. A thermal description of the melting of c-and a-silicon under pulsed excimer lasers10.1016/0169-4332(89)90894-5 ↗
22. Temperature dependence of the absorption coefficient in 4H- and 6H- silicon carbide at 355 nm laser pumping wavelength10.1002/1521-396X(200206)191:2<613::AID-PSSA613>3.0.CO;2-T ↗
23. Wakaki · 2007
24. High power single-shot laser ablation of silicon with nanosecond 355 nm10.1016/j.apsusc.2005.09.040 ↗
25. A study of near-infrared nanosecond laser ablation of silicon carbide10.1016/j.ijheatmasstransfer.2013.06.050 ↗
26. Real-time stress detection of monocrystalline silicon by laser irradiation using Mach–Zehnder interferometry10.1007/s12043-016-1304-9 ↗
27. Nanostructures on SiC surface created by laser microablation10.1016/j.apsusc.2007.08.048 ↗
28. Review of laser microscale processing of silicon carbide10.2351/1.3562522 ↗
29. Numerical and experimental analysis of pulsed excimer laser processing of silicon carbide10.1016/S0169-4332(01)00518-9 ↗
30. Impurity activation in N+ ion-implanted 6H-SiC with pulsed laser annealing method10.1557/PROC-640-H5.31 ↗
31. Laser sputtering: Part I. On the existence of rapid laser sputtering at 193 nm10.1016/0168-583X(85)90760-8 ↗
32. 6H-SiC photoconductive switches triggered at below bandgap wavelengths10.1109/TDEI.2007.4286537 ↗