Challenges and strategies to optimize the figure of merit: Keeping eyes on thermoelectric metamaterials
Source abstract
Abstract
Thermoelectric materials have been recognized as promising materials and make a prime contribution to converting waste heat into useful electrical energy without any further loss. In recent decades, researchers have witnessed the development of new and efficient mechanisms/strategies to optimize the figure of merit of these materials to recover the low-grade heat more efficiently. A balanced trade-off between TE parameters is indispensable to optimizing the ZT value. To some extent, the hit and trial method can be effective to optimize the TE properties. In electronic band engineering; the band convergence, the curvedness of the bandgap, or effective mass manipulation, significantly optimizes the power factor. Similarly, hierarchical scattering and low-dimensionality techniques are effective strategies to reduce thermal conductivity. It is better to pay more attention to the lattice thermal conductivity part rather than other TE properties to optimize the ZT value. For this one of the approaches is the introduction of various scales of defects in the specimen which scatter the phonons of all wavelengths. Finally, the notion of synthesizing TE metamaterials might bring a revolution in the TE materials system by mounting the ZT value to the threshold of 3.0.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Snyder · 2011 · 101
2. High thermoelectric performance of Bi0.46Sb1.54Te3-SnTe: synergistic modulation of electrical and thermal transport by the introduction of thermoelectric hetero nano region10.1021/acsami.9b07414 ↗
3. Recent advances in high-performance bulk thermoelectric materials10.1080/09506608.2016.1183075 ↗
4. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
5. Flexible thermoelectric materials and devices10.1016/j.apmt.2018.07.004 ↗
6. Rowe · 1995
7. Periodic DLC interlayer-functionalized Bi-Sb-Te- based nanostructures: a novel concept for building heterogenized superarchitectures with enhanced thermoelectric performance10.1021/acsami.1c23206 ↗
8. Thermoelectric coolers: infinite potentials for finite localized microchip cooling10.1016/j.jmst.2021.12.069 ↗
9. Nanoindentation characterization of thin film stack structures by finite element analysis and experiments using acoustic emission testing10.1016/j.mssp.2022.106737 ↗
10. Recent developments in flexible thermoelectric devices10.1002/smsc.202100005 ↗
11. Design of flexible inorganic thermoelectric devices for decrease of heat loss10.1007/s12274-020-3195-9 ↗
12. High-performance nanostructured thermoelectric materials10.1038/asiamat.2010.138 ↗
13. Thermoelectrics: a review of present and potential applications10.1016/S1359-4311(03)00012-7 ↗
14. J. Mao, G. Chen, Z. Ren, Thermoelectric cooling materials, Nat. Mater., 20 (2021), 454-461.10.1038/s41563-020-00852-w ↗
15. Power generation and thermoelectric cooling enabled by momentum and energy multiband alignments10.1126/science.abi8668 ↗
16. Advanced thermoelectric materials for flexible cooling application10.1002/adfm.202010695 ↗
17. A low-cost printed organic thermoelectric generator for low-temperature energy harvesting10.1016/j.renene.2020.11.158 ↗
18. Nucleation of nano-size particles following the spinodal decomposition in the pseudo-ternary Ge0.6Sn0.1Pb0.3Te compound10.1016/j.scriptamat.2009.09.029 ↗
19. Solubility of Ti in thermoelectric PbTe compound10.1016/j.intermet.2017.05.016 ↗
20. TiNiSn half-Heusler crystals grown from metallic flux for thermoelectric applications10.1016/j.jallcom.2018.12.165 ↗
21. Thermoelectric Bi2Te3-xSex alloys for efficient thermal to electrical energy conversion10.1039/C7CP06176E ↗
22. Sub-micron features in higher manganese silicide10.1155/2013/701268 ↗
23. Breaking the tradeoff among thermoelectric parameters by multi composite of porosity and CNT in AZO films10.1016/j.energy.2021.120320 ↗
24. Realizing high doping efficiency and thermoelectric performance in n-type SnSe polycrystals via bandgap engineering and vacancy compensation
25. Thermally strain-induced band gap opening on platinum diselenide-layered films: a promising two-dimensional material with excellent thermoelectric performance10.1021/acs.chemmater.0c04351 ↗
26. Laser co-ablation of bismuth antimony telluride and diamond-like carbon nanocomposites for enhanced thermoelectric performance10.1039/C7TA08701B ↗
27. Figure of merit for thermoelectrics10.1063/1.342976 ↗
28. Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2− xS10.1016/j.nanoen.2021.105991 ↗
29. Rational electronic and structural designs advance BiCuSeO thermoelectrics10.1002/adfm.202101289 ↗
30. Improved high-temperature thermoelectric properties of dual-doped Ca3Co4O910.1021/acsomega.1c05721 ↗
31. N-type amorphous silicon-germanium thin films with embedded nanocrystals as a novel thermoelectric material of elevated ZT10.1016/j.jallcom.2021.161843 ↗
32. Nanostructure controlled construction of high- performance thermoelectric materials of polymers and their composites10.1039/C8TA09656B ↗
33. High-performance thermoelectrics and challenges for practical devices10.1038/s41563-021-01109-w ↗
34. A comprehensive review of Thermoelectric Generators: technologies and common applications10.1016/j.egyr.2019.12.011 ↗
35. Thermoelectric devices based on one-dimensional nanostructures10.1039/c3ta01594g ↗
36. Enhancing the figure of merit of n-type PbTe materials through multi-scale graphene induced interfacial engineering10.1016/j.nantod.2021.101176 ↗
37. The effect of thermal treatment on the thermoelectric figure of merit of silicon doped using nuclear transmutation10.3103/S1068375521040037 ↗
38. Synergetic effects of co-dispersed Cu and insulating HfO2 nanoparticles enabled high thermoelectric figure of merit in Bi0.5Sb1.5Te3 composites10.1016/j.apsusc.2021.149783 ↗
39. Pressure-induced enhancement of thermoelectric figure of merit and structural phase transition in TiNiSn10.1021/acs.jpclett.0c03609 ↗
40. Optimal band structure for thermoelectrics with realistic scattering and bands10.1038/s41524-021-00512-w ↗
41. Bottom-up engineering strategies for high-performance thermoelectric materials10.1007/s40820-021-00637-z ↗
42. Advances in thermoelectrics10.1080/00018732.2018.1551715 ↗
43. A record thermoelectric efficiency in tellurium-free modules for low-grade waste heat recovery10.1038/s41467-021-27916-y ↗
44. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
45. The multi-dimensional approach to synergistically improve the performance of inorganic thermoelectric materials: a critical review10.1016/j.arabjc.2021.103103 ↗
46. Decoupling interrelated parameters for designing high performance thermoelectric materials10.1021/ar400290f ↗
47. A new thermoelectric material: CsBi4Te610.1021/ja039885f ↗
48. NbFeSb-based p-type half-Heuslers for power generation applications10.1039/C4EE02180K ↗
49. High-efficiency half-Heusler thermoelectric modules enabled by self-propagating synthesis and topologic structure optimization10.1039/C9EE02228G ↗
50. Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials10.1038/ncomms9144 ↗
51. Enhanced thermoelectric performance of Ba8Ga16Ge30 clathrate by modulation doping and improved carrier mobility10.1002/aelm.202000782 ↗
52. High thermoelectric performance of Cu substituted type-VIII clathrate Ba8Ga16-xCux Sn30 single crystals10.1063/1.3583570 ↗
53. Thermoelectric properties of type-VIII clathrate Ba8Ga16Sn30 doped with Cu10.1016/j.jallcom.2012.05.049 ↗
54. The effect of Te substitution for Sb on thermoelectric properties of tetrahedrite10.1007/s11664-013-2931-2 ↗
55. Preparation of tetrahedrite Cu12 Sb4 S13 by mechanical alloying and hot pressing10.1007/s11664-018-6549-2 ↗
56. Rapid synthesis of high-performance thermoelectric materials directly from natural mineral tetrahedrite10.1557/mrc.2013.26 ↗
57. Increasing the thermoelectric figure of merit of tetrahedrites by co-doping with nickel and zinc10.1021/cm502570b ↗
58. Promising materials for thermoelectric applications10.1016/j.jallcom.2019.07.147 ↗
59. Realization of high thermoelectric performance in p-type unfilled ternary skutterudites FeSb2+xTe1−x via band structure modification and significant point defect scattering10.1016/j.actamat.2013.09.006 ↗
60. Improvement of thermoelectric performance of CoSb3−x Tex skutterudite compounds by additional substitution of IVB-group elements for Sb10.1021/cm802367f ↗
61. High-performance n-type YbxCo4Sb12: from partially filled skutterudites towards composite thermoelectrics10.1038/am.2016.77 ↗
62. Nano-micro-porous skutterudites with 100% enhancement in ZT for high performance thermoelectricity10.1016/j.nanoen.2016.11.016 ↗
63. N-type skutterudites (R, Ba, Yb)y Co4Sb12 (R= Sr, la, mm, DD, SrMm, SrDD) approaching ZT≈ 2.010.1016/j.actamat.2013.09.039 ↗
64. Influence of shear strain on HPT-processed n-type skutterudites yielding ZT= 2.110.1016/j.jallcom.2020.157409 ↗
65. Localized double phonon scattering and DOS induced thermoelectric enhancement of degenerate nonstoichiometric Li1−xNbO2 compounds10.1039/C7RA10557F ↗
66. High performance (ZT> 1) n-type oxide thermoelectric composites from earth abundant materials10.1016/j.nanoen.2021.105905 ↗
67. Giant thermoelectric Seebeck coefficient of a two-dimensional electron gas in SrTiO310.1038/nmat1821 ↗
68. eng) Sb9: Mg-containing Zintl phases with low thermal conductivity, Sr9Mg4.45 (1) Bi9 and Sr9Mg4.42 (110.1021/acs.inorgchem.1c00078 ↗
69. Yb14MnSb11: new high efficiency thermo- electric material for power generation10.1021/cm060261t ↗
70. A dual role by incorporation of magnesium in YbZn2Sb2 Zintl phase for enhanced thermoelectric performance10.1002/aenm.202001229 ↗
71. Significant enhancement in thermoelectric performance of Mg3Sb2 from bulk to two-dimensional mono layer10.1016/j.nanoen.2019.05.028 ↗
72. Thermoelectric response of bulk and monolayer MoSe2 and WSe210.1021/cm504244b ↗
73. Strain-induced enhancement in the thermoelectric performance of a ZrS2 monolayer10.1039/C6TC01135G ↗
74. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
75. Copper ion liquid-like thermoelectrics10.1038/nmat3273 ↗
76. Thermoelectric properties of copper selenide with ordered selenium layer and disordered copper layer10.1016/j.nanoen.2012.02.010 ↗
77. Thin-film thermoelectric devices with high room-temperature figures of merit10.1038/35098012 ↗
78. High thermoelectric performances of monolayer SnSe allotropes10.1039/C7NR04766E ↗
79. Realizing ZT of 2.3 in Ge1−x−ySbxInyTe via reducing the phase-transition temperature and introducing resonant energy doping10.1002/adma.201705942 ↗
80. Quadruple-layer group-IV tellurides: low thermal conductivity and high performance two-dimensional thermoelectric materials10.1039/D1CP00469G ↗
81. High superionic conduction arising from aligned large lamellae and large figure of merit in bulk Cu1.94Al0.02Se10.1063/1.4896520 ↗
82. 3D charge and 2D phonon transports leading to high out-of-plane ZT in n-type SnSe crystals10.1126/science.aaq1479 ↗
83. Compositional fluctuations locked by a thermal transformation yielding high thermoelectric performance in GeTe10.1002/adma.202005612 ↗
84. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal10.1038/s41563-021-01064-6 ↗
85. A wearable thermoelectric generator fabricated on a glass fabric10.1039/c4ee00242c ↗
86. Enhanced thermoelectric properties of screen-printed Bi0.5Sb1.5Te3 and Bi2Te2.7Se0.3 thick films using a post annealing process with mechanical pressure10.1039/C7TC01797A ↗
87. Optical and thermoelectric properties of nano-particles based Bi2 (Te1−xSex)3 thin films10.1016/j.spmi.2016.09.034 ↗
88. Bi2Te3 nanoplates and nanoflowers: synthesized by hydrothermal process and their enhanced thermoelectric properties10.1039/c2ce06348d ↗
89. Rational synthesis of ultrathin n-type Bi2Te3 nanowires with enhanced thermoelectric properties10.1021/nl202935k ↗
90. Extraordinary off-stoichiometric bismuth telluride for enhanced n-type thermoelectric power factor10.1021/jacs.6b09222 ↗
91. A new class of doped nanobulk high-figure-of-merit thermoelectrics by scalable bottom-up assembly10.1038/nmat3213 ↗
92. Effects of different morphologies of Bi2Te3 nanopowders on thermoelectric properties10.1007/s11664-013-2541-z ↗
93. Simultaneous optimization of electrical and thermal transport properties of Bi0.5Sb1.5Te3 thermoelectric alloy by twin boundary engineering10.1016/j.nanoen.2017.05.031 ↗
94. Identifying the specific nanostructures responsible for the high thermoelectric performance of (Bi, Sb)2Te3 nanocomposites10.1021/nl100804a ↗
95. Large improvement in thermoelectric properties in pressure-tuned p-type Sb1.5Bi0.5Te310.1021/cm000888q ↗
96. Intrinsic nanostructure induced ultralow thermal conductivity yields enhanced thermoelectric performance in Zintl phase Eu2ZnSb2
97. Advances in thermoelectric materials research: looking back and moving forward10.1126/science.aak9997 ↗
98. Dimensionality effects in high-performance thermoelectric materials: computational and experimental progress in energy harvesting applications10.1002/wcms.1547 ↗
99. Computer-aided design of high-efficiency GeTe-based thermoelectric devices10.1039/D0EE01004A ↗
100. Phonon engineering through crystal chemistry10.1039/c1jm11754h ↗