journal article·2021-03

The investigation of the corrosion behavior of CZTS thin films prepared via electrodeposition

K. Çınar Demir

Publisher page

Abstract

Abstract In this study, Cu2ZnSnS4 (CZTS) thin films were deposited on indium tin oxide (ITO)-coated glass substrate by single-step electrochemical deposition (ECD). CZTS absorber layers were obtained with −1.05 V cathodic potential and 2700 s deposition time for pH:5 and at room temperature. Trisodium citrate was used as a complexing agent for co-electrodeposition. After the deposition, the CZTS thin films were annealed at 580 °C in sulfur powder and N2 atmosphere for 60 min for the formation of stoichiometric kesterite structure. The structural, morphological and optical properties of the prepared thin films were investigated by X-ray diffraction (XRD) analysis, optical absorption techniques, scanning electron microscopy (SEM) observations and Raman spectroscopy measurements. Crystallisation of the films was confirmed by XRD measurements. The prepared films were also examined using Electrochemical Impedance Spectroscopy (EIS) and Tafel measurements. Nyquist, open circuit voltage (OCV) voltage(OCP) and Bode analysis were used to find out the structural changing and corrosion behavior of the CZTS films. The equivalent circuit parameters such as solution resistance (Rs), polarization resistance (Rp), a constant phase element (CPE), a CPE exponent (n) and diffusion potential were calculated as 253.8 Ω cm2, 944.2 Ω cm2, 1.547 × 10−3 Ω−1 s cm−2, 0.500 and 8.631 × 10−3 Ω−1 s1/2. cm−2, respectively. Also, with the help of Tafel measurements, the corrosion potential and current values were determined as −0.161 V and 1 × 10−6 A, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Zinc molarity effect on Cu2ZnSnS4 thin film properties prepared by spray pyrolysis10.1007/s10854-017-8353-9 ↗
2. A review on pulsed laser deposited CZTS thin films for solar cell applications10.1016/j.jallcom.2014.09.018 ↗
3. Improving carrier-transport properties of CZTS by Mg incorporation with spray pyrolysis10.1021/acsami.9b05244 ↗
4. Synthesis and characterization of chemical spray pyrolysed CZTS thin films for solar cell applications
5. Characterization of a CZTS thin film solar cell grown by sputtering method10.1016/j.solener.2013.11.035 ↗
6. Characterization of one-step deposited Cu2ZnSnS4 thin films derived from a single crystalline powder10.1016/j.renene.2019.05.076 ↗
7. The chemical vapor deposition of Cu2ZnSnS4 thin films10.1039/c0sc00538j ↗
8. Studies of compositional dependent CZTS thin film solar cells by pulsed laser deposition technique: an attempt to improve the efficiency10.1016/j.jallcom.2012.07.108 ↗
9. Katagiri · 2015 · 183
10. Sulfurization and annealing effects on thermally evaporated CZTS films10.1016/j.matlet.2016.11.094 ↗
11. Deposition of kesterite Cu2ZnSnS4 (CZTS) thin films by spin coating technique for solar cell application
12. Preparation of Cu2ZnSnS4 films by electrodeposition using ionic liquids10.1016/j.solmat.2009.09.003 ↗
13. Effect of complexing agent on the morphology and annealing temperature of CZTS kesterite thin films by electrochemical deposition10.1016/j.cap.2019.03.003 ↗
14. Influence of solvent on the proprieties of Cu2ZnSnS4 thin film fabricated by one-step electrodeposition10.1134/S1023193519070036 ↗
15. Towards phase pure Kesterite Cu2ZnSnS4 thin films via Cu-Zn-Sn electrodeposition under a variable applied potential10.1016/j.jallcom.2018.12.269 ↗
16. Development of a CZTS solar cell with CdS buffer layer deposited by RF magnetron sputtering10.1016/j.jallcom.2018.09.126 ↗
17. Impedance spectroscopy in photovoltaic materials of Cu2ZnSnS4 (CZTS) and use of the KK transform10.1088/1742-6596/786/1/012014 ↗
18. Electrochemical impedance spectroscopy studies of polymer degradation: application to biosensor development10.1016/j.trac.2004.08.010 ↗
19. Cu2ZnSnS4/graphene nanocomposites for ultrafast, long life all-solid-state lithium batteries using lithium metal anode10.1016/j.ensm.2016.02.004 ↗
20. Distribution of relaxation time in solution-processed polycrystalline CZTS thin films: study of impedance spectroscopy10.1016/j.ceramint.2018.05.007 ↗
21. Enhanced hydrogen evolution reactions on nanostructured Cu2ZnSnS4 (CZTS) electrocatalyst10.1016/j.apsusc.2017.03.262 ↗
22. Overall noble metal free Ni and Fe doped Cu-2 ZnSnS4 (CZTS) bifunctional electrocatalytic systems for enhanced water splitting reactions10.1016/j.ijhydene.2019.02.054 ↗
23. Mellikov · 2015 · 289
24. Characterization of ion transport in thin films using electrochemical impedance spectroscopy. I. Principles and theory10.1016/j.memsci.2007.06.046 ↗
25. Solvothermal synthesis of flower-like Cu2ZnSnS4 nanostructures and their application as anode materials for lithium-ion batteries10.1016/j.cplett.2012.07.060 ↗
26. CZTS monograin membranes for photoelectrochemical fuel production preparation and characterization10.1109/ICCEP.2015.7177625 ↗
27. Properties of spray deposited Cu2ZnSnS4 (CZTS) thin films10.1016/j.jaap.2012.10.018 ↗
28. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique
29. Synthesis of CZTS/RGO composite material as supercapacitor electrode10.1016/j.ceramint.2016.03.194 ↗
30. Tafel kinetics of electrocatalytic reactions: from experiment to first-principles10.1021/cs501312v ↗
31. Single step electrosynthesis of Cu2ZnSnS4 (CZTS) thin films for solar cell application10.1016/j.electacta.2010.02.051 ↗
32. Growth behavior of co-electrodeposited CZTS precursor thin films from acidic baths containing tartaric acid10.1016/j.matchemphys.2017.09.071 ↗
33. Influence of deposition potential on Cu2ZnSnS4 thin-film solar cells co-electrodeposited on fluorine-doped tin oxide substrates10.1016/j.jallcom.2017.01.114 ↗
34. Composition controlled preparation of Cu-Zn-Sn precursor films for Cu2ZnSnS4 solar cells using pulsed electrodeposition10.1016/j.jallcom.2015.07.203 ↗
35. Cyclic voltammetry studies of copper, tin and zinc electrodeposition in a citrate complex system for CZTS solar cell application10.1016/j.cap.2015.11.017 ↗
36. Oxygen-deficient indium tin oxide thin films annealed by atmospheric pressure plasma jets with/without air-quenching10.1016/j.apsusc.2013.11.118 ↗
37. Improved output power and low forward voltage for GaN-based light emitting diodes with an annealed ITO transparent conducting layer10.1007/s10854-016-4558-6 ↗
38. Well-aligned arrays of vertically oriented ZnO nanowires electrodeposited on ITO-coated glass and their integration in dye sensitized solar cells10.1016/j.jphotochem.2010.02.004 ↗
39. The effect of Bi2O3 compensation during thermal treatment on the crystalline and electrical characteristics of bismuth titanate thin films10.1016/j.ceramint.2006.10.024 ↗
40. Annealing studies on the structural and optical properties of electrodeposited CdO thin films10.1016/j.matchemphys.2011.09.035 ↗
41. Structural, optical, and electrical properties of indium tin oxide films with corundum structure fabricated by a sol-gel route based on solvothermal reactions10.1016/S0040-6090(02)00482-0 ↗
42. Preparation of transparent ferroelectric Pb0.92La0.08Ti0.96O3 thick films on ITO-coated glass substrates by a sol-gel route10.1016/j.matlet.2005.05.079 ↗
43. Electrodeposition of kesterite thin films for photovoltaic applications: quo vadis?10.1002/pssa.201431364 ↗
44. Towards phase pure kesterite CZTS films via Cu-Zn-Sn electrodeposition followed by sulfurization10.1016/j.electacta.2016.10.079 ↗
45. Effect of the intermediate sulfide layer on the Cu2ZnSnS4-based solar cells10.1007/s10854-016-6241-3 ↗
46. Novel synthesis of kesterite Cu2ZnSnS4 nanoflakes by successive ionic layer adsorption and reaction technique: characterization and application10.1016/j.electacta.2012.01.079 ↗
47. Secondary phases and temperature effect on the synthesis and sulfurization of CZTS10.1016/j.solener.2018.07.085 ↗
48. Impact of sol-gel precursor treatment with preheating temperature on properties of Cu2ZnSnS4 thin film and its photovoltaic solar cell10.1016/j.jallcom.2015.09.028 ↗
49. Effects of complexing agent on earth-abundant environmentally friendly Cu2ZnSnS4 thin film solar cells prepared by sol-gel deposition10.1007/s00339-018-1876-y ↗
50. CZTS stoichiometry effects on the band gap energy10.1016/j.jallcom.2013.07.199 ↗
51. Corrosion behaviour of ultra fine grained titanium in simulated body fluidfor implant application
52. Visible light active CZTS sensitized CdS/TiO2 tandem photoanode for highly efficient photoelectrochemical hydrogen generation10.1016/j.solener.2019.01.067 ↗
53. Effect of microstructure morphology on Li-ion battery graphite anode performance: electrochemical impedance spectroscopy modeling and analysis10.1016/j.ssi.2017.11.024 ↗
54. Porous nickel-iron oxide as a highly efficient electrocatalyst for oxygen evolution reaction10.1002/advs.201500199 ↗
55. Preparation and electrochemical study of cerium-silica sol-gel thin films10.1016/j.jallcom.2004.03.047 ↗
56. Electrochemical study of tailored sol-gel thin films as pre-treatment prior to organic coating for AZ91 magnesium alloy10.1016/j.porgcoat.2010.02.009 ↗
57. Electrochemical impedance analysis of spray deposited CZTS thin film: effect of Se introduction10.1016/j.optmat.2016.06.011 ↗
58. In-situ and green method to prepare Pt-free Cu2ZnSnS4 (CZTS) counter electrodes for efficient and low cost dye-sensitized solar cells10.1021/acssuschemeng.5b00585 ↗
59. Duplex Ni-Zn-Cu-P/Ni-P electroless coating on magnesium alloy via maleic acid pretreatment10.1016/j.surfcoat.2017.08.027 ↗
60. Application of electroless Ni-P coating on magnesium alloy via CrO3/HF free titanate pretreatment10.1016/j.apsusc.2017.06.100 ↗
61. Cobalt-doped Zn(O,S)/Ga2O3 nanoheterojunction composites for enhanced hydrogen production10.1039/C7NJ05124G ↗
62. Photoelectrochemical and impedance spectroscopic investigation of water oxidation with "Co-Pi"-Coated hematite electrodes10.1021/ja306427f ↗
63. Fabrication of g-C3N4/TiO2 hierarchical spheres with reactive {001} TiO2 crystal facets and its visible-light photocatalytic activity10.1016/j.ijhydene.2015.12.191 ↗
64. Ag nanoparticles loaded TiO2/MWCNT ternary nanocomposite: a visible-light-driven photocatalyst with enhanced photocatalytic performance and stability10.1016/j.ceramint.2016.07.056 ↗
65. Enhanced solar water oxidation performance of TiO2 via band edge engineering: a tale of sulfur doping and earth-abundant CZTS nanoparticles sensitization10.1021/acscatal.7b02102 ↗
66. A comparative study of the corrosion performance of titanium (Ti), titanium nitride (TiN), titanium dioxide (TiO2) and nitrogen-doped titanium oxides (N-TiO2), as coatings for biomedical applications10.1016/j.ceramint.2015.05.153 ↗
67. Layered double hydroxide modified WO3 nanorod arrays for enhanced photoelectrochemical water splitting10.1016/j.apcata.2016.09.014 ↗
68. Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium10.1016/j.corsci.2012.01.021 ↗
69. Electrochemical impedance spectroscopy of ZnO nanostructures10.1016/j.elecom.2009.02.019 ↗
70. Preparation and electrochemical corrosion behavior of bulk nanocrystalline ingot iron in HCl acid solution10.1021/jp046297v ↗
71. The electrochemical corrosion of bulk nanocrystalline ingot iron in acidic sulfate solution10.1021/jp0538971 ↗
72. Diffusivity of anion vacancies in WO3 passive films10.1016/j.electacta.2007.04.102 ↗
73. Effect of grain size on corrosion: a review
74. Zinc oxide surface functionalization and related effects on corrosion resistance of titanium implants10.1016/j.ceramint.2017.11.195 ↗
75. Corrosion resistance enhancement of AZ91D magnesium alloy by electroless Ni-Co-P coating and Ni-Co-P-SiO2 nanocomposite10.1007/s11665-014-1210-6 ↗
76. Pretreatment-free Ni-P plating on magnesium alloy at low temperatures10.1016/S1003-6326(18)64894-0 ↗
77. Analysis of electrochemical noise data in both time and frequency domains to evaluate the effect of ZnO nanopowder addition on the corrosion protection performance of epoxy coatings10.1016/j.arabjc.2012.02.018 ↗