Enhancement of electrical properties of flexible ITO/PET by atmospheric pressure roll-to-roll plasma
Source abstract
Abstract
Abstract Flexible materials can significantly reduce the cost of the electronic devices because they can be manufactured by large-area roll-to-roll (R2R) processing. In this work, R2R atmospheric pressure plasma was used to modify flexible indium-tin-oxide films on polyethylene terephthalate foil (ITO/PET). Plasma treatment was performed in different feed gases consisting of various ratio between nitrogen and oxygen. A range of experimental techniques were used to study surface properties of ITO/PET, including X-ray and Ultraviolet photoelectron spectroscopies, four-point probe, Atomic force microscopy and UV–Vis measurement. We found that R2R plasma treatment decreased carbon contamination and increased the number of oxygen vacancies on the surface, whereas the ratio between indium and tin remained constant. UPS showed an increase in the work function from 3.9 eV for untreated sample to 5.1 eV for sample treated in plasma for very short time of 2 s. Four-point probe measurement demonstrated remarkable decrease in sheet resistance from 44.2 Ω/sq to 11.7 Ω/sq after plasma treatment for 2 s. The AFM and UV–Vis measurements revealed only slightly change on the surface morphology and transmittance of the ITO/PET. The plasma treated foils were stored under laboratory environment and inside of the glovebox to study the effect of the environmental conditions on the stability of the improved properties. The ITO surfaces stored in laboratory environment for 3 weeks preserved approx. 60% of the properties achieved by plasma treatment, e.g. work function of the samples was approx. 4.5 eV after 3 weeks (and 5 weeks) ageing time in the laboratory environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · ZnO doping and properties · Green IT and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Ultrathin organic spin-on layers on indium tin oxide as a prospective tool for enhanced light throughput10.1016/j.matlet.2016.10.008 ↗
2. Improving the optoelectronic properties of titanium-doped indium tin oxide thin films10.1088/1361-6641/aa6e3f ↗
3. Investigation of defects in indium doped TiO2 thin films using electrical and optical techniques10.1016/j.jallcom.2016.12.294 ↗
4. Electrocatalytic performance of Pt nanoparticles sputter-deposited on indium tin oxide toward methanol oxidation reaction: the particle size effect10.1016/j.apsusc.2017.04.156 ↗
5. Structure, stability and electrochromic properties of polyaniline film covalently bonded to indium tin oxide substrate10.1016/j.apsusc.2016.01.041 ↗
6. Zhou · Org. Electron. · 2012 · 873 · 327
7. Interface energetics in organo-metal halide perovskite-based photovoltaic cells10.1039/c4ee00168k ↗
8. Crystal organometal halide perovskites with promising optoelectronic applications10.1039/C5TC03417E ↗
9. Effects of argon sputtering and UV-ozone radiation on the physico-chemical surface properties of ITO
10. Recent advances in the inverted planar structure of perovskite solar cells
11. Pathways toward high-performance perovskite solar cells: review of recent advances in organo-metal halide perovskites for photovoltaic applications10.1117/1.JPE.6.022001 ↗
12. Metallohalide perovskite–polymer composite film for hybrid planar heterojunction solar cells10.1039/C4RA11739E ↗
13. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
14. Upscaling of perovskite solar cells: fully ambient roll processing of flexible perovskite solar cells with printed back electrodes10.1002/aenm.201500569 ↗
15. Chlorinated indium tin oxide electrodes with high work function for organic device compatibility10.1126/science.1202992 ↗
16. Low-cost electrochemical treatment of indium tin oxide anodes for high-efficiency organic light-emitting diodes10.1063/1.4862315 ↗
17. D. Yamashita, A. Ishizaki, T. Yamamoto, In Situ Measurements of Work Function of Indium Tin Oxide after UV/Ozone Treatment, 56, 2015, pp. 1445–1447.10.2320/matertrans.MA201516 ↗
18. A study of the characteristics of indium tin oxide after chlorine electro-chemical treatment10.1016/j.materresbull.2016.03.008 ↗
19. Effects of H2/O2 mixed gas plasma treatment on electrical and optical property of indium tin oxide10.1016/j.apsusc.2012.10.153 ↗
20. Tuning the ITO work function by capacitively coupled plasma and its application in inverted organic solar cells10.1016/j.apsusc.2016.05.077 ↗
21. Surface properties of indium tin oxide treated by Cl2 inductively coupled plasma10.1016/j.apsusc.2014.08.016 ↗
22. Oxygen-deficient indium tin oxide thin films annealed by atmospheric pressure plasma jets with/without air-quenching10.1016/j.apsusc.2013.11.118 ↗
23. S.J. Lee, Y. Kim, J. Hwang, J. Lee, S. Jung, H. Park, S. Cho, S. Nahm, W.S. Yang, H. Kim, S.H. Han, Flexible Indium–Tin Oxide Crystal on Plastic Substrates Supported by Graphene Monolayer, 2017, pp. 1–8. 〈http://dx.doi.org/10.1038/s41598-017-02265-3〉.10.1038/s41598-017-02265-3 ↗
24. Stabilization of the work function of indium tin oxide using organic surface modifiers in organic light-emitting diodes10.1063/1.2998599 ↗
25. J.A. Chaney, S.E. Koh, C.S. Dulcey, P.E. Pehrsson, Surface Chemistry of Carbon Removal from Indium Tin Oxide by Base and Plasma Treatment, with Implications on Hydroxyl Termination, 218, 2003, pp. 258–266. 〈http://dx.doi.org/10.1016/S0169-4332(03)00617-2〉.10.1016/S0169-4332(03)00617-2 ↗
26. S. Chen, Y. Dai, N. Sun, G. Fang, D. Wang, W. Zhou, S. Van Eek, X. Yan, L. Zhou, X. Chen, S. Jung, J. Lee, B. Wei, S. Pan, Z. Tang, J. Lin, Dielectric/metal/dielectric Alternative Transparent Electrode: Observations on Stability/degradation, n.d.
27. Development of dielectric-barrier-discharge ionization10.1007/s00216-014-8281-y ↗
28. Treatment of poly(ethylene terephthalate) foils by atmospheric pressure air dielectric barrier discharge and its influence on cell growth10.1016/j.apsusc.2015.09.082 ↗
29. Effect of atmospheric pressure plasma on inactivation of pathogens inoculated onto bacon using two different gas compositions10.1016/j.fm.2010.07.022 ↗
30. Z. Fang, S. Member, X. Wang, T. Shao, S. Member, Influence of Oxygen Content on Argon/Oxygen Dielectric Barrier Discharge Plasma Treatment of Polyethylene Terephthalate Film, 2016, pp. 1–8.
31. Fast and low-temperature (70°C) mineralization of inkjet printed mesoporous TiO2 photoanodes using ambient air plasma10.1021/acsami.6b09556 ↗
32. Activation of poly(ethylene terephthalate) surfaces by atmospheric pressure plasma10.1016/j.polymdegradstab.2012.08.001 ↗
33. Surface analysis of poly(ethylene naphthalate) (PEN) films treated at atmospheric pressure using diffuse coplanar surface barrier discharge in air and in nitrogen10.1016/j.polymdegradstab.2012.01.014 ↗
34. Generation of a high-density highly non-equilibrium air plasma for high-speed large-area flat surface processing10.1088/0741-3335/53/12/124031 ↗
35. P. Mariani, L. Vesce, A. Di, T. Homola, M. Shekargoftar, P. Dzik, R. Krumpolec, Ď. Zuzana, Low-temperature (70°C) Ambient Air Plasma- Fabrication of Inkjet-printed Mesoporous TiO2 Flexible Photoanodes Low-temperature (70°C) Ambient Air Plasma-fabrication of Inkjet- Printed Mesoporous TiO2 Flexible Photoanodes, n.d.
36. The origin of the high work function of chlorinated indium tin oxide10.1038/am.2013.33 ↗
37. Effect of organic solar cells using various power O2 plasma treatments on the indium tin oxide substrate10.1016/j.jcis.2015.12.002 ↗
38. Surface modification of indium tin oxide by plasma treatment: an effective method to improve the efficiency, brightness, and reliability of organic light emitting devices10.1063/1.118575 ↗
39. Estimation of electronegativity values of elements in different valence states10.1021/jp062886k ↗
40. Supporting Information – Tuning the Reactivity of Nanostructured Indium Tin Oxide Electrodes toward Chemisorption, 2015.
41. The role of Ar plasma treatment in generating oxygen vacancies in indium tin oxide thin films prepared by the sol-gel process10.1016/j.apsusc.2017.02.007 ↗
42. Correlation between resistivity and oxygen vacancy of hydrogen-doped indium tin oxide thin fi lms10.1016/j.tsf.2011.01.249 ↗
43. Plasma treatment of glass surfaces using diffuse coplanar surface barrier discharge in ambient air10.1007/s11090-013-9467-3 ↗
44. Suppression of hydrophobic recovery by plasma polymer films with vertical chemical gradients10.1021/acs.langmuir.5b03913 ↗
45. Evaluation of polymer hydrophobic recovery behavior following H 2 O plasma processing10.1002/app.41978 ↗
46. Plasma afterglow treatment of polymer powders: process parameters, wettability improvement, and aging effects10.1002/ppap.201600144 ↗
47. Deposition of indium – tin-oxide films on polymer substrates for application in plastic-based flat panel displays10.1016/S0040-6090(01)01489-4 ↗
48. Resistance switching characteristics induced by O2 plasma treatment of an indium tin oxide film for use as an insulator in resistive random access memory