Synthesis and electrochemical performance of CeO2/NiS nanocomposite for enhanced asymmetric supercapacitor device applications
Source abstract
Abstract
A novel CeO 2/NiS nanocomposite, combining the advantageous properties of transition metal sulfides (high conductivity) and rare-earth metal oxides (excellent stability), was successfully synthesized using a simple hydrothermal method. This composite leverage synergistic effects to potentially achieve superior electrochemical performance in supercapacitor applications. To evaluate its suitability for supercapacitors, the electrochemical performance of the CeO 2/NiS electrode was comprehensively investigated using a series of techniques, including cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) curves, electrochemical impedance spectroscopy (EIS), and cyclic stability analysis. The results demonstrate that the as-prepared CeO 2/NiS electrode exhibits significantly improved supercapacitor performance compared to the bare CeO 2 electrode. The CV curves of the CeO 2/NiS electrode reveal a high specific capacitance of 825.53 F/g at a low scan rate of 5 mV/s, indicating good charge storage capability. Further insights into the charge storage mechanism were obtained using the Trasatti method. This analysis revealed that the total stored capacitance of the CeO₂/NiS electrode is 1250 F/g, with contributions from both outer surface capacitance (94 F/g) and inner diffusion capacitance (1156 F/g). Notably, the dominant contribution (92.5 %) originates from capacitive processes, highlighting the efficient charge storage at the electrode surface. The CeO 2/NiS electrode also demonstrates exceptional rate capability, delivering a specific capacitance (Csp) of 710 F/g at a high current density of 1 A/g. Additionally, it exhibits impressive cycling stability, retaining approximately 96.56 % of its initial capacitance even after undergoing 3000 continuous GCD cycles at a high current density of 10 A/g. These results suggest that the CeO 2/NiS composite can maintain its performance during extended charge-discharge cycles, a crucial characteristic for practical supercapacitor applications. Finally, an asymmetric supercapacitor device was fabricated using the CeO 2/NiS nanocomposite. This device achieved a specific capacitance of 157 F/g, demonstrating the potential of the CeO 2/NiS composite for practical energy storage applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced battery technologies research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Hydrophobic cellulose films with excellent strength and toughness via ball milling activated acylation of microfibrillated cellulose10.1016/j.carbpol.2016.07.101 ↗
2. A fiber supercapacitor with high energy density based on hollow graphene/conducting polymer fiber electrode10.1002/adma.201600689 ↗
3. Synthesis of hierarchically porous NiCo2S4 core-shell hollow spheres via self-template route for high performance supercapacitors10.1016/j.apsusc.2018.05.003 ↗
4. Metal sulfides encapsulated in doped carbon aerogel towards superior and safe energy storage: two birds with one stone10.1016/j.electacta.2024.143819 ↗
5. Supercapacitor technology and its applications: a review10.1088/1757-899X/561/1/012105 ↗
6. A novel aluminum–graphite dual-ion battery10.1002/aenm.201670064 ↗
7. Novel electrodes for supercapacitor: conducting polymers, metal oxides, chalcogenides, carbides, nitrides, MXenes, and their composites with graphene10.1016/j.jallcom.2021.161998 ↗
8. Bimetallic nickel-cobalt nanospheres electrodeposited on nickel foam as a battery-type electrode material for fabrication of asymmetric supercapacitors10.1016/j.jallcom.2023.169409 ↗
9. Compact graphene/MoS2 composite films for highly flexible and stretchable all-solid-state supercapacitors10.1039/C6TA10165H ↗
10. Synthesis of nanostructured metal sulfides via a hydrothermal method and their use as an electrode material for supercapacitors10.1039/C8NJ04358B ↗
11. Synthesis of CNTs on ZnO/NiS composite as an advanced electrode material for high-performance supercapacitors10.1016/j.est.2020.101199 ↗
12. Neoteric hollow tubular MnS/Co3S4 hybrids as high-performance electrode materials for supercapacitors10.1016/j.electacta.2021.138893 ↗
13. Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage10.1038/s41557-018-0045-4 ↗
14. Electrochemical hydrogen storage materials: state-of-the-art and future perspectives10.1021/acs.energyfuels.3c05138 ↗
15. Transfer-free in-situ synthesis of high-performance polybenzimidazole grafted graphene oxide-based proton exchange membrane for high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2023.232666 ↗
16. Flexible mica films coated by magnetron sputtered insulating layers for high-temperature capacitive energy storage10.1002/sus2.228 ↗
17. Ni-doped CeO2 decorated delaminated layered titanium carbonitride (d-Ti3CN) MXene for potential applications in symmetric supercapacitors10.1016/j.jallcom.2023.170043 ↗
18. Decoration of CeO2 nanoparticles on hierarchically porous MnO2 nanorods and enhancement of supercapacitor performance by redox additive electrolyte10.1016/j.jallcom.2020.158456 ↗
19. Electrochemical performance of ternary RGO/β-Ni(OH)2/CeO2 composite in addition with different metal oxides for supercapacitor application10.1088/2043-6254/ab8bde ↗
20. CeO2 nanoparticles modified on graphite sheet electrodes for photoelectrochemical tobacco wastewater detection, degradation, and toxicity measurement10.1021/acsanm.3c00600 ↗
21. Highly porous CeO2 nanostructures prepared via combustion synthesis for supercapacitor applications10.1016/j.apsusc.2017.12.130 ↗
22. Characterization and electrochemical properties of Carbon/CeO2 composites prepared using a hydrothermal method10.1016/j.matchemphys.2023.127820 ↗
23. Enhanced electrochemical supercapacitor and excellent amperometric sensor performance of heterostructure CeO2 -CuO nanocomposites via chemical route10.1016/j.apsusc.2018.06.071 ↗
24. A nanoclustered ceria abrasives with low crystallinity and high Ce3+/Ce4+ ratio for scratch reduction and high oxide removal rates in the chemical mechanical planarization10.1007/s10853-022-07338-x ↗
25. Interconnected hierarchical NiCo2O4 microspheres as high-performance electrode materials for supercapacitors10.1039/C7DT01289F ↗
26. Controllable synthesis of sphere-shaped interconnected interlinked binder-free nickel sulfide@nickel foam for high-performance supercapacitor applications10.1038/s41598-022-18728-1 ↗
27. Highly stable mesoporous CeO2/CeS2 nanocomposite as electrode material with improved supercapacitor electrochemical performance10.1016/j.ceramint.2018.08.348 ↗
28. Reagents assisted Mg-doped CeO2 for high-performance energy-storage applications10.1016/j.jelechem.2020.114401 ↗
29. Ni-CeO2 spherical nanostructures for magnetic and electrochemical supercapacitor applications10.1039/C6CP08281E ↗
30. Supercapacitive properties, optical band gap, and photoluminescence of CeO2–ZnO nanocomposites prepared by eco-friendly green and citrate sol-gel methods: a comparative study10.1016/j.ceramint.2022.04.100 ↗
31. TiO2/CeO2 Core/Shell nanostructures for photocatalytic and photo electrochemical applications10.1016/j.inoche.2022.109842 ↗
32. Investigation of electrochemical performance of an efficient Ti2O3–CeO2 nanocomposite for enhanced pollution-free energy conversion applications10.1016/j.jenvman.2021.113138 ↗
33. Direct interfacial growth of Sr–CeO2 nanoparticles on carbon nanofibers and their multidisciplinary applications10.1016/j.mssp.2022.107171 ↗
34. Preparation of Fe-SnO2@CeO2 nanocomposite electrode for asymmetric supercapacitor device performance analysis10.1016/j.est.2021.102402 ↗
35. Formation of carbon coated yolk-shelled Fe3O4-CeO2 hollow spheres toward remarkable performance supercapacitors10.1016/j.est.2022.105269 ↗
36. Mesoporous CeO2-α-MnO2- reduced graphene oxide composite with ultra-high stability as a novel electrode material for supercapacitor
37. Facile hydrothermal synthesis of ternary CeO2-SnO2/rGO nanocomposite for supercapacitor application10.1142/S1793604720510054 ↗
38. Scalable ternary hierarchical microspheres composed of PANI/rGO/CeO2 for high performance supercapacitor applications10.1016/j.carbon.2019.05.043 ↗
39. Synthesis and characterization of reduced graphene oxide decorated with CeO2-doped MnO2 nanorods for supercapacitor applications10.1016/j.jcis.2017.01.100 ↗
40. Synthesis effect on surface functionalized Ti3C2Tx MXene supported nickel oxide nanocomposites with enhanced specific capacity for supercapacitor application10.1016/j.est.2023.108414 ↗
41. Influence on effective and ineffective delamination of MXene (Ti3C2Tx) by tightly anchoring tin oxide nanocomposite for boosting the specific capacitance of supercapacitor10.1016/j.jallcom.2022.166092 ↗