journal article·2023-04

Electrochemical energy storage and photoelectrochemical performance of Ni1-XZnXFe2O4 nanoparticles

Ala Manohar, V. Vijayakanth, S.V. Prabhakar Vattikuti, Ki Hyeon Kim

Publisher page

Abstract

In this study, the mixed Ni–Zn nanoparticle`s noteworthy shape is attained using a solvothermal reflux technique. The distinctive crystalline spinel cubic structure, morphology with the correct stoichiometric element ratio, and surface analysis was confirmed by X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) analysis. A three-electrode device was used to confirm the electrochemical properties of the materials as they were produced. Electrochemical performances attest to the electrode material`s electrochemical behavior. Cyclic voltammetry (CV) and Galvanostatic charge-discharge (GCD) techniques are used to investigate the electrochemical performance in a 1 M KOH electrolyte. The Ni 0.7Zn 0.3Fe 2O 4 (ZNF3) electrode performs better than the other electrodes such as Ni 0.9Zn 0.1Fe 2O 4 and Ni 0.8Zn 0.2Fe 2O 4 (ZNF1 and ZNF2) electrodes in terms of specific capacitance (Cs), measuring 152 F/g, at a current density (CD) of 2 A/g. The study of the linear sweep voltammetry (LSV) curve revealed that the ZNF3 electrode had a higher photocurrent density.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. A review of renewable energy sources, sustainability issues and climate change mitigation
2. Battery-supercapacitor energy storage systems for electrical vehicles : a review10.3390/en15155683 ↗
3. Challenges and opportunities for supercapacitors
4. 0D to 3D carbon-based networks combined with pseudocapacitive electrode material for high energy density supercapacitor : a review10.1016/j.cej.2020.126352 ↗
5. A High-performance, tailorable, wearable, and foldable solid-state supercapacitor enabled by arranging pseudocapacitive groups and MXene flakes on textile electrode surface
6. Studies on photocatalytic performance and supercapacitor applications of undoped and Cu-doped ZnO nanoparticles
7. Three-dimensional hierarchical core-shell CuCo2O4@Co(OH)2 nanoflakes as high-performance electrode materials for flexible supercapacitors10.1016/j.jcis.2020.11.004 ↗
8. In-situ growth of MnCo2O4 hollow spheres on nickel foam as pseudocapacitive electrodes for supercapacitors10.1016/j.jcis.2020.12.010 ↗
9. 3D nickel-cobalt phosphide heterostructure for high-performance solid-state hybrid supercapacitors10.1016/j.jpowsour.2020.228324 ↗
10. Fabrication of hierarchical MoO3@NixCo2x(OH) x core -shell arrays on carbon cloth as enhanced-performance electrodes for asymmetric supercapacitors10.1016/j.jcis.2021.09.046 ↗
11. ‘Carbon quantum dots-glue” enabled high-capacitance and highly stable nickel sulphide nanosheet electrode for supercapacitors10.1016/j.jcis.2021.05.099 ↗
12. Niobium carbide as a promising pseudocapacitive sodium-ion storage anode10.1002/ente.202100298 ↗
13. Microwave-assisted hydrothermal synthesis of three-dimensional NbOPO4 -reduced graphene oxide-carbon nanotube composite for high performance sodium-ion battery anode10.1016/j.jpowsour.2022.231457 ↗
14. Metallic CoO/Co heterostructures stabilized in an ultrathin amorphous carbon shell for high- performance electrochemical supercapacitive behaviour10.1039/C8TA09733J ↗
15. Ordered mesoporous alpha-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors10.1038/nmat2612 ↗
16. Three-dimensional graphene-based macro- and mesoporous frameworks for high-performance electrochemical capacitive energy storage
17. ferrite-embedded porous carbon nanospheres for ultrafast and stable lithium ion batteries
18. Rotation-independent representations for haptic movements10.1038/srep02595 ↗
19. Energy storage: the future enabled by nanomaterials
20. Li – O2 and Li – S batteries with high energy storage10.1038/nmat3191 ↗
21. Progress of electrochemical capacitor electrode materials : a review10.1016/j.ijhydene.2009.04.005 ↗
22. Perspectives for electrochemical capacitors and related devices10.1038/s41563-020-0747-z ↗
23. Best practice methods for determining an electrode material ’ s performance for ultracapacitors10.1039/c0ee00074d ↗
24. A monolithic integrated ultra-flexible all-solid- state supercapacitor based on a polyaniline conducting polymer10.1039/C9TA03076J ↗
25. Mo6+–P5+ Co-doped Li2ZnTi3O8 anode for Li- storage in a wide temperature range and appli- cations in LiNi0.5Mn1.5O4/Li2ZnTi3O8 full cells10.1039/D1QI01077H ↗
26. Effect of Co2þ content on supercapacitance properties of hydrothermally synthesized Ni1-xCoxFe2O4 nanoparticles10.1016/j.mssp.2019.104902 ↗
27. A comparative study of electrochemical capacitive behavior of NiFe2O4 synthesized by different routes10.1149/1.3601863 ↗
28. Molecular grafting towards high-fraction active nanodots implanted in N-doped carbon for sodium dual-ion batteries
29. Flexible SnSe/N-doped porous carbon-fiber film as anode for high-energy-density and stable sodium-ion batteries10.1016/j.jpowsour.2022.232405 ↗
30. A Novel aluminum – graphite dual-ion battery10.1002/aenm.201670064 ↗
31. Alloy-type anodes for high-performance rechargeable batteries angewandte10.1002/anie.202206770 ↗
32. Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage Meng10.1038/s41557-018-0045-4 ↗
33. Metal–organic framework-derived Co3O4 modified nickel foam-based dendrite-free anode for robust lithium metal batteries
34. Effect of Co content on magnetic features and SPIN states in Ni – Zn spinel ferrites10.1016/j.ceramint.2021.01.063 ↗
35. Structural parameters , energy states and magnetic properties of the novel Se-doped NiFe2O4 ferrites as highly efficient electrocatalysts for HER10.1016/j.ceramint.2022.05.140 ↗
36. Impact of the Zn – Co content on structural and magnetic characteristics of the Ni spinel ferrites10.1016/j.ceramint.2022.03.070 ↗
37. Structure, morphology and electrical/magnetic properties of Ni-Mg Nano-ferrites from a new perspective10.3390/nano12071045 ↗
38. Impact of Ga3 + ions on the structure, magnetic, and optical features of Co-Ni nanostructured spinel ferrite microspheres10.3390/nano12162872 ↗
39. Ni substitution effect on the structure, magnetization, resistivity and permeability of zinc ferrites10.1039/D0TC05692H ↗
40. Electromagnetic properties of zinc - nickel ferrites in the frequency range of 0.05 - 10 GHz, Mater
41. Bimetallic ZnFe2O4 nanosheets prepared via electrodeposition as binder-free high-performance supercapacitor electrodes10.1016/j.apsusc.2021.149951 ↗
42. Incremental substitution of Ni with Mn in ¬ NiFe2 O4 to largely enhance its super capacitance properties
43. Electrochemical performances of poly (3 , 4-ethylene dioxythiophene)– NiFe2O4 nanocomposite as electrode for supercapacitor10.1016/j.electacta.2010.03.077 ↗
44. Single and ternary nanocomposite electrodes of Mn3O4/TiO2/rGO for supercapacitors10.1007/s10008-020-04837-2 ↗
45. Dielectric, magnetic hyperthermia and photocatalytic properties of Mg0.7Zn0.3Fe2O4 nanocrystals10.1109/TMAG.2020.3024717 ↗
46. Magnetic hyperthermia and photocatalytic degradation of rhodamine B dye using Zn-doped spinel Fe3O4 nanoparticles10.1007/s10854-021-05549-7 ↗
47. Size distribution and magnetization optimization of single-core iron oxide nanoparticles by exploiting design of experiment methodology10.1109/TMAG.2012.2224325 ↗
48. Co3O4/Ni (OH)2 composite mesoporous nanosheet networks as a promising electrode for supercapacitor applications10.1039/c2jm15863a ↗
49. Three-dimensional ordered macroporous NiFe2O4 coated carbon yarn for knittable fi briform supercapacitor10.1016/j.electacta.2018.05.166 ↗
50. Nickel ferrite beehive-like nanosheets for binder-free and high- energy-storage supercapacitor electrodes10.1016/j.jallcom.2020.156929 ↗
51. Structural and electrochemical properties of mixed calcium-zinc spinel ferrites nanoparticles10.1016/j.ceramint.2022.09.322 ↗
52. Synthesis and characterization of Mg2+ substituted MnFe2O4 nanoparticles for supercapacitor applications10.1016/j.ceramint.2022.07.018 ↗
53. Binary nickel ferrite oxide (NiFe2O4) nanoparticles coated on reduced graphene oxide as stable and high-performance asymmetric supercapacitor electrode material10.1016/j.ijhydene.2020.07.063 ↗
54. Anomalous electrochemical capacitance in Mott- insulator titanium sesquioxide10.1039/D1TA10262A ↗
55. Study of solvent variation on controlled synthesis of different nanostructured NiCo2O4 thin films for supercapacitive application
56. Construction of NiCo2O4 nanosheet-decorated leaflike Co3O4 nanoarrays from metal-organic framework for high- performance hybrid supercapacitors10.1039/C9DT02907A ↗
57. Asymmetric supercapacitor based on VS2 nanosheets and activated carbon materials10.1039/C5RA27155J ↗
58. Battery-like MnCo2O4 electrode materials combined with active carbon for hybrid supercapacitors10.1016/j.electacta.2019.03.166 ↗
59. Boosting the electrochemical performance of polyaniline based all-solid- state flexible supercapacitor using NiFe2O4 as adjuvant10.1016/j.jelechem.2019.113482 ↗
60. Role of cerium-doping in CoFe2O4 electrodes for high-performance supercapacitors10.1016/j.est.2020.101452 ↗
61. Nano-flowered manganese doped ferrite@PANI composite as energy storage electrode material for supercapacitors10.1016/j.jelechem.2020.114491 ↗
62. Electrochemically engineered zinc (iron) oxyhydroxide/zinc ferrite heterostructure with interfacial microstructure and hydrophilicity ideal for supercapacitors10.1016/j.jcis.2021.08.053 ↗
63. Electrochemical, oxygen evolution reaction and photoelectrochemical water splitting activity of Ca-doped MgFe2O4 nanoparticles10.1016/j.jallcom.2022.164566 ↗
64. A layer-by-layer assembled graphene/zinc sulfide/polypyrrole thin-film electrode via electrophoretic deposition for solar cells10.1016/j.tsf.2013.12.019 ↗
65. Microwave-assisted self-doping of TiO2 photonic crystals for efficient photoelectrochemical water splitting10.1021/am404848n ↗
66. S-TiO2/S-reduced graphene oxide for enhanced photoelectrochemical water splitting10.1016/j.apsusc.2018.01.070 ↗
67. BiFeO3/Fe2O3 electrode for photoelectrochemical water oxidation and photocatalytic dye degradation : a single step synthetic approach10.1016/j.chemosphere.2022.135071 ↗
68. Synergistic promotion of photoelectrochemical water splitting efficiency of TiO2 nanorod arrays by doping and surface modification10.1039/D1TC02816B ↗