journal article·2019-04

Effect of thickness and post deposition annealing temperature on the structural and optical properties of thermally evaporated molybdenum oxide films

Dibya Jyoti Borah, A.T.T. Mostako, P.K. Saikia, P. Dutta

Publisher page

Abstract

Abstract In this paper, the influence of thickness and post deposition annealing temperature on thermally evaporated molybdenum oxide films has been studied. The X-ray diffraction (XRD) and Scanning Electron Microscope (SEM) are used for crystal structural and surface morphological characterization of the films, respectively. The XRD analysis showed that the presence of α-MoO3 and MoO2 crystalline phase of the films annealed at elevated temperature ~ 250 °C after deposition. The optical constants are determined from UV–Vis transmission spectra. The optical band gap and Urbach energy is found to be temperature dependent. The refractive index of the films is estimated by the optical method as well as cross-sectional SEM image analysis. It is found that the refractive index of the films increases from ~ 1.70 to 2.03 with the decrease in film thickness from ~ 2.9 to 1.7 µm. It is also observed that the refractive index decreased from ~ 2.03 to 1.61 with the increase in post deposition annealing temperature from room temperature (RT) to ~ 250 °C. Moreover, extinction coefficient, optical conductivity, porosity, and film density are investigated as a function of source-substrate distance and post deposition annealing temperature. The Photoluminescence (PL) properties of the films are also investigated by recording spectra under the excitation wavelength at 250 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. White stacked electrophosphorescent organic light-emitting devices employing MoO3 as a charge-generation layer10.1002/adma.200501915 ↗
2. Highly efficient white organic electroluminescent devices based on tandem architecture10.1063/1.2147730 ↗
3. Highly efficient organic tandem solar cells using an improved connecting architecture10.1063/1.2772208 ↗
4. Preparation of nickel oxide thin films for gas sensors applications10.1016/S0925-4005(99)00077-5 ↗
5. Surface and gas sensing properties of nanocrystalline nickel oxide thin films10.1016/j.apsusc.2013.03.085 ↗
6. Gas sensing properties of MoO3 nanoparticles synthesized by solvothermal method10.1007/s11051-009-9751-6 ↗
7. Elaboration and characterization of crystalline RF-deposited V2O5 positive electrode for thin film batteries10.1016/j.apsusc.2009.07.115 ↗
8. Lithium insertion/extraction reaction on crystalline MoO310.1016/S0167-2738(97)00418-9 ↗
9. Vapour-transportation preparation and reversible lithium intercalation/deintercalation α-MoO3 microrods10.1021/jp0553784 ↗
10. Memory switching of V2O5-TeO2 glasses10.1016/0022-3093(86)90021-9 ↗
11. Electrochromic vanadium-pentoxide-based films: structural, electrochemical, and optical properties10.1063/1.359433 ↗
12. Effect of post-annealing on the properties of thermally evaporated molybdenum oxide films: interdependence of work function and oxygen to molybdenum ratio10.1016/j.mssp.2017.11.037 ↗
13. Intense luminescence emission from rare-earth-doped MoO3 nanoplates and lamellar crystals for optoelectronic applications10.1088/0022-3727/47/35/355105 ↗
14. Investigation of optical properties and electronic transitions in bulk and nano-microribbons of molybdenum trioxide10.1088/0022-3727/47/8/085302 ↗
15. Preparation of MoO2 sub-micro scale sheets and their optical properties10.1016/j.jallcom.2011.01.089 ↗
16. Growth and characterization of molybdenum oxide thin films prepared by photochemical metal-organic deposition (PMOD)10.1016/j.poly.2010.01.036 ↗
17. Magnetic properties of large-area one-dimensional WO2 and MoO2 nanorods10.1016/j.jmmm.2006.02.025 ↗
18. Post-annealing effect upon optical properties of electron beam evaporated molybdenum oxide thin films10.1016/j.apsusc.2008.10.069 ↗
19. Scanning probe microscopy of cleaved molybdates: α-MoO3(010), Mo18O52(100), Mo8O23(010), and h-Mo4O11(100)10.1006/jssc.1996.0213 ↗
20. Ordered mesoporous metalic MoO2 materials with highly reversible lithium storage capacity10.1021/nl902423a ↗
21. Structural stoichiometry and phase transitions of MoO3 thin films for solid state microbatteries
22. Epitaxial growth and properties of MoOx 2<x<2.75 films10.1063/1.1868852 ↗
23. Effect of substrate temperature on the structural and optical properties of MoO3 thin films prepared by spray pyrolysis technique10.1016/S0921-5107(02)00385-9 ↗
24. Annealing effect on physical properties of evaporated molybdenum oxide thin films for ethanol sensing10.1016/j.apsusc.2016.10.139 ↗
25. Thickness dependence of dispersion parameters of the MoOx thin films prepared using the vacuum evaporation technique10.1016/j.jallcom.2015.06.164 ↗
26. Synthesis and characterization of flash-evaporated MoO3 thin films10.1016/0022-0248(95)00269-3 ↗
27. The growth and electrochemical properties of metal-oxide thin films: lithium intercalation10.1016/0169-4332(93)90680-A ↗
28. Investigation of CVD molybdenum oxide films10.1016/S0167-577X(01)00486-4 ↗
29. Largescale synthesis of single-crystal molybdenum trioxide nanobelts by hot-wire chemical vapour deposition10.1016/j.jallcom.2014.09.069 ↗
30. Effect of oxygen partial pressure on the structural and optical properties of dc reactive magnetron sputtered molybdenum oxide films10.1016/j.cap.2009.06.005 ↗
31. Effects of RF magnetron sputtering deposition process parameters on the properties of molybdenum thin films10.1016/j.tsf.2017.07.057 ↗
32. Optical constants and thermocoloration of pulsed laser deposited molybdenum oxide thin films10.1016/j.optcom.2010.03.059 ↗
33. Characterization on electron beam evaporated α-MoO3 thin films by the influence of substrate temperature10.1016/j.cap.2005.10.001 ↗
34. Structural and optical properties of MoO3 and V2O5 thin films prepared by spray pyrolysis10.1016/j.cattod.2005.11.072 ↗
35. Electrochromic properties of nanocrystalline MoO3 thin films10.1016/j.tsf.2007.09.019 ↗
36. Effect of temperature of annealing on optical, structural and electrochromic properties of sol-gel dip coated molybdenum oxide films10.1016/j.apsusc.2010.09.052 ↗
37. Determination of the thickness and optical constants of amorphous silicon10.1088/0022-3735/16/12/023 ↗
38. Maissel · 1970 · 1
39. The Scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
40. Post deposition annealing controlled structural and optical properties of R.F. magnetron sputtered MoO3 films10.5185/amlett.2012.11466 ↗
41. Study of optical characteristics of tin oxide thin film prepared by sol–gel method10.1007/s12034-013-0582-9 ↗
42. Effect of CaO addition on properties of ion-induced secondary electron emission of MgO films10.1116/1.582188 ↗
43. Börnstein · 2006
44. Dopant-dependent reflectivity and refractive index of microcrystalline molybdenum-bronze thin films10.1063/1.1461881 ↗
45. Influence of porous morphology on optical dispersion properties of template free mesoporous titanium dioxide (TiO2) films10.1016/j.apsusc.2007.07.196 ↗
46. The dielectric studies on sol-gel routed molybdenum oxide thin film10.1142/S2010135X17500114 ↗
47. Electrical properties of amorphous semiconductors10.1103/RevModPhys.36.1042 ↗
48. Gubanov · 1965
49. Electrons in disordered structures10.1080/00018736700101265 ↗
50. Ioffe · 1960 · 237
51. Free-polymer controlling morphology of α-MoO3 nanobelts by a facile hydrothermal synthesis, their electrochemistry for hydrogen evolution reactions and optical properties10.1016/j.jallcom.2011.12.024 ↗
52. Electrical properties of evaporated molybdenum oxide films10.1063/1.1658710 ↗
53. Self-assembly and photoluminescence of molybdenum oxide nanoparticles10.1007/s00339-011-6345-9 ↗
54. Emperical temperature dependence of the refractive index of semiconductors10.1063/1.359248 ↗
55. The long-wavelength edge of photographic sensitivity and of the electroni absorytion of solids10.1103/PhysRev.92.1324 ↗
56. Variation of optical constants in GE10 SE60 TE30 thin film
57. Refractive index and optical absorption properties of the complexes of a cyclobutane containing thiazolyl hydrazone ligand10.1016/j.optmat.2004.09.021 ↗
58. Influence of substrate temperature on the structural and optical properties of Sb2S3 thin films
59. Deposition of (Zn, Mn)2 SiO4 for plasma display panels using charged liquid cluster beam10.1063/1.122396 ↗
60. Preparation of MoO3 nanostructures and their optical properties
61. Structural optical magnetic properties of Co doped α-MoO3 sprayed thin films10.1016/j.sna.2016.11.032 ↗
62. Change of the properties of nanostructured MoO3 thin films using gamma-ray irradiation10.1016/j.ceramint.2018.04.040 ↗
63. Effect of substrate temperature on the characteristics of α-MoO3 hierarchical 3D microspheres prepared by facile PVD process10.1016/j.jallcom.2014.01.238 ↗
64. Alteration of architecture of MoO3 nanostructures on arbitrary substrates: growth kinetics, spectroscopic and gas sensing properties10.1039/C4NR04529G ↗