Morphological and electrical properties of Nickel based Ohmic contacts formed by laser annealing process on n-type 4H-SiC
Source abstract
Abstract
This work reports on the morphological and electrical properties of Ni-based back-side Ohmic contacts formed by laser annealing process for SiC power diodes. Nickel films, 100 nm thick, have been sputtered on the back-side of heavily doped 110 um 4H-SiC thinned substrates after mechanical grinding. Then, to achieve Ohmic behavior, the metal films have been irradiated with an UV excimer laser with a wavelength of 310 nm, an energy density of 4.7 J/cm2 and pulse duration of 160 ns. The morphological and structural properties of the samples were analyzed by means of different techniques. Nanoscale electrical analyses by conductive Atomic Force Microscopy (C-AFM) allowed correlating the morphology of the annealed metal films with their local electrical properties. Ohmic behavior of the contacts fabricated by laser annealing have been investigated and compared with the standard Rapid Thermal Annealing (RTA) process. Finally, it was integrated in the fabrication of 650V SiC Schottky diodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and interfaces · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Kimoto · 2014
2. Emerging trends in wide band gap semiconductors (SiC and GaN) technology for power devices
3. Ohmic contacts to SiC10.1142/S0129156405003429 ↗
4. Laser backside contact annealing of SiC power devices: a prerequisite for SiC thin wafer technology
5. Metal/semiconductor contacts to silicon carbide: physics and technology10.4028/www.scientific.net/MSF.924.339 ↗
6. Schottky contacts to silicon carbide: physics, technology and applications, in "Advancing Silicon Carbide Electronics Technology vol. I"10.21741/9781945291852-3 ↗
7. Laser annealing of silicon10.1016/S0254-0584(97)80010-7 ↗
8. Laser annealing of ohmic contacts on GaAs10.1063/1.92413 ↗
9. Laser and furnace annealed Au, Ag and Al ohmic contacts on n+ GaAs10.1051/rphysap:01987002209096700 ↗
10. Simultaneous nickel silicidation and silicon crystallization induced by excimer laser annealing on plastic substrate10.1063/1.3377916 ↗
11. Nickel-affected silicon crystallization and silicidation on polyimide by multipulse excimer laser annealing10.1063/1.3531562 ↗
12. Role of the early stages of Ni-Si interaction on the structural properties of the reaction products10.1063/1.4818630 ↗
13. Improved ohmic contacts to 6H-SiC by pulsed laser processing10.4028/www.scientific.net/MSF.338-342.1005 ↗
14. Laser alloying for ohmic contacts on SiC at room temperature10.4028/www.scientific.net/MSF.264-268.783 ↗
15. Alloying of ohmic contacts to n-Type 4H-SiC via laser irradiation10.4028/www.scientific.net/MSF.740-742.773 ↗
16. T. Tabata, S. Halty, I. Toqué-Trèsonne, F. Mazzamuto, K. Huet, Y. Mori, UV excimer laser annealing for next generation power electronics, in: Proceedings of the 21st International Conference on Ion Implantation Technology (IIT2016), 2016. doi:〈http://doi.org/10.1109/IIT.2016.7882917〉.10.1109/IIT.2016.7882917 ↗
17. Low thermal budget ohmic contact formation by laser anneal10.4028/www.scientific.net/MSF.858.565 ↗
18. High-resolution investigation of atomic interdiffusion during Co/Ni/Si phase transition10.1063/1.1579552 ↗
19. Critical nickel thickness to form silicide transrotational structures on [001] silicon10.1063/1.2338019 ↗