journal article·2024-10

Unlocking low-concentration NH3 gas sensing: An innovative MOF-derived In2O3/Co3O4 nanocomposite approach

Amensisa Negasa Begi, Shahid Hussain, Muhammad Javed Liaqat, Norah Salem Alsaiari, Mohamed Ouladsmane, Guanjun Qiao, Guiwu Liu

Publisher page

Abstract

Ammonia (NH 3 ) is an odorless gas with a pungent smell that can affect health differently based on exposure and concentration. In this study, indium oxide was decorated with cobalt oxide (In 2O 3/Co 3O 4 ) flower-like nanocomposites (NFs) as gas-sensitive materials, revealing p-type semiconducting characteristics. The detection of ammonia (NH 3) at low concentrations is a significant challenge for chemoresistive gas sensors. Porous Co 3O 4 nanoflowers were combined with In 2O 3 nanoparticles to form p-n heterojunctions for NH 3 detection. The p-n heterojunction effect and the capability of the sub-valent band to hold vacancies within In 2O 3 nanoparticles effectively inhibit electron-hole recombination and extend the carrier lifetime. The In 2O 3/Co 3O 4 = 0.04 ratio-based gas sensor exhibited excellent selectivity, achieving a low detection limit of 500 ppb for NH 3 at 250 °C. The rapid diffusion of gas within the porous Co 3O 4 NSs and In 2O 3 nanoparticles accounted for the high response (7.72) and fast response/recovery time (92 s/51 s) of the In 2O 3/Co 3O 4-based gas sensor to 10 ppm NH 3. This study presents a method for fabricating NH 3 gas sensors with trace-level detection capabilities by adjusting the band structure of nanoparticles and three-dimensional metal-oxide nanostructures.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Review and evaluation of sustainable ammonia production, storage, and utilization
2. Key difference between transition state stabilization and ground state destabilization: increasing atomic charge densities before or during enzyme-substrate binding
3. Recent advance in biological responsive nanomaterials for biosensing and molecular imaging application10.3390/ijms23031923 ↗
4. Illuminating the nanomaterials triggered signal amplification in electrochemiluminescence biosensors for food safety: Mechanism and future perspectives10.1016/j.ccr.2023.215571 ↗
5. Niosh · 2013
6. A transcription factor-based bacterial biosensor system and its application for on-site detection of explosives10.1016/j.bios.2023.115805 ↗
7. Interdigitated electrodes-based Au-MoS2 hybrid gas sensor for sensing toxic CO and NH3 gases at room temperature10.1088/1361-6528/acd0b7 ↗
8. Low-operating temperature ammonia sensor based on Cu2O nanoparticles decorated with p-type MoS2 nanosheets10.1039/D1TC00391G ↗
9. Room temperature ammonia gas sensing properties of MoS2 nanostructured thin film
10. CuO-decorated MOF derived ZnO polyhedral nanostructures for exceptional H2S gas detection10.1016/j.chemosphere.2023.137827 ↗
11. Enhanced NH3 gas sensing performance based on electrospun alkaline-earth metals composited SnO2 nanofibers10.1016/j.jallcom.2014.08.153 ↗
12. Ammonia gas sensors based on In2O3/PANI hetero-nanofibers operating at room temperature10.3762/bjnano.7.122 ↗
13. Detection of DMF and NH3 at room temperature using a sensor based on a MoS2/single-walled carbon nanotube composite10.1021/acsanm.3c01638 ↗
14. Enhanced sensing performance of the Co3O4 hierarchical nanorods to NH3 gas10.1016/j.snb.2014.11.141 ↗
15. MoSe2/multiwalled carbon nanotube composite for ammonia sensing in a natural humid environment10.1016/j.jhazmat.2022.128821 ↗
16. High-performance NH3 sensor based on CeO2/In2O3 heterostructure for mutton preservation detection10.1016/j.mssp.2023.107475 ↗
17. PtO2-decorated MoS2 ultrathin nanostructures for enhanced NH3 gas sensing properties10.1016/j.mssp.2022.106990 ↗
18. Hybrid Co3O4/SnO2 core-shell nanospheres as real-time rapid-response sensors for ammonia gas10.1021/acsami.6b00305 ↗
19. Analyzing the local electronic structure of Co3O4 using 2p3d resonant inelastic X-ray scattering10.1021/acs.jpcc.2c01521 ↗
20. High precision NH3 sensing using network nanosheet Co3O4 arrays based sensor at room temperature10.1016/j.snb.2016.05.063 ↗
21. Enhanced room temperature NH3 sensing of rGO/Co3O4 nanocomposites10.1016/j.matchemphys.2021.125033 ↗
22. The advances of Co3O4 as gas sensing materials: a review10.1016/j.jallcom.2016.06.086 ↗
23. Recent trends in electrochemical detection of NH3, H2S, and NOx gases10.20964/2017.03.76 ↗
24. Revisiting traditional and modern trends in versatile 2D nanomaterials: Synthetic strategies, structural stability, and gas-sensing fundamentals10.26599/JAC.2023.9220810 ↗
25. Ammonia gas sensors: a comprehensive review10.1016/j.talanta.2019.06.034 ↗
26. Metal-organic frameworks-derived In2O3 microtubes/Ti3C2Tx MXene composites for NH3 detection at room temperature10.1016/j.snb.2022.131755 ↗
27. Multifunctional TiO2/C nanosheets derived from 3D metal–organic frameworks for mild-temperature-photothermal-sonodynamic-chemodynamic therapy under photoacoustic image guidance10.1016/j.jcis.2022.04.077 ↗
28. TiO2/ZnO heterostructure nanowire-based NO2 sensor10.1016/j.mssp.2019.104770 ↗
29. Development of a colorimetric and turn-on fluorescent probe with large Stokes shift for H2S detection and its multiple applications in environmental, food analysis and biological imaging10.1016/j.dyepig.2023.111687 ↗
30. Controllable synthesis of Co3O4/polyethyleneimine-carbon nanotubes nanocomposites for CO and NH3 gas sensing at room temperature10.1016/j.jallcom.2015.03.139 ↗
31. The mixed-potential NH3 sensor using BiVO4/Bi4V2O11 heterojunction sensing electrode prepared by self-phase separation10.1016/j.snb.2022.132765 ↗
32. High-performance Cr doped ZnO by UV for NH3 gas sensor10.1016/j.sna.2020.112230 ↗
33. TiO2 decorated MXene nanosheets for high-performance ammonia gas sensing at room-temperature
34. Design and construction of core-shelled Co3O4-CoFe2O4 heterojunction for highly sensitive and selective detection of ammonia10.1016/j.cej.2022.139346 ↗
35. Co3O4/In2O3 pn heterostructures based gas sensor for efficient structure-driven trimethylamine detection10.1016/j.ceramint.2023.02.103 ↗
36. Polyhedral Co3O4@ ZnO nanostructures as proficient photocatalysts for vitiation of organic dyes from waste water10.1016/j.molliq.2022.119765 ↗
37. Promoting effects of In2O3 on Co3O4 for CO oxidation: tuning O2 activation and CO adsorption strength simultaneously10.1021/cs501049r ↗
38. Hydrothermal microwave synthesis of Co3O4/In2O3 nanostructures for photoelectrocatalytic reduction of Cr (VI)10.1021/acsanm.2c00107 ↗
39. Hierarchical In2O3@ SnO2 core-shell nanofiber for high-efficiency formaldehyde detection10.1021/acsami.9b16599 ↗
40. Enhanced triethylamine-sensing properties of PN heterojunction Co3O4/In2O3 hollow microtubes derived from metal-organic frameworks10.1016/j.snb.2018.01.246 ↗
41. Highly sensitive In2O3/PANI nanosheets gas sensor for NO2 detection10.1016/j.jece.2022.109211 ↗
42. Co3O4 nanosheets decorated with In2O3 nanocubes with exposed {001} facets for ppb-Level CO sensing10.1021/acsanm.2c02235 ↗
43. Facile design and hydrothermal synthesis of In2O3 nanocube polycrystals with superior triethylamine sensing properties10.1021/acsomega.0c00497 ↗
44. Construction of Co3O4 nanorods/In2O3 nanocubes heterojunctions for efficient sensing of NO2 gas at low temperature10.1007/s10854-018-0087-9 ↗
45. Characterization of micro-and mesoporous solids by physisorption methods and pore-size analysis10.1016/S0926-860X(98)00164-1 ↗
46. Progress of catalytic oxidation of VOCs by manganese-based catalysts10.1016/j.fuel.2024.131305 ↗
47. Au decorated In2O3 hollow nanospheres: a novel sensing material toward amine10.1016/j.snb.2019.126696 ↗
48. Structure-dependent biomorphology Co3O4-In2O3 nanorods for expired acetone gas sensor
49. Pd@ Co3O4/In2O3 hollow microtubes derived from core-shell MOFs as materials for conductometric trace toluene detection10.1016/j.snb.2023.133747 ↗
50. Enhanced gas sensing properties of SnO2 hollow spheres decorated with CeO2 nanoparticles heterostructure composite materials10.1021/acsami.6b00169 ↗
51. Hollow ZnSnO3 cubes with controllable shells enabling highly efficient chemical sensing detection of formaldehyde vapors10.1021/acsami.7b03112 ↗
52. One-pot hydrothermal synthesis of self-assembled MoS2/WS2 nanoflowers for chemiresistive room-temperature NO2 sensors10.1016/j.snb.2023.135215 ↗
53. Gas sensor towards n-butanol at low-temperature detection: hierarchical flower-like Ni-doped Co3O4 based on solvent-dependent synthesis10.1016/j.snb.2020.129028 ↗
54. Adsorbed oxygen ions and oxygen vacancies: their concentration and distribution in metal oxide chemical sensors and influencing role in sensitivity and sensing mechanisms10.3390/s23010029 ↗
55. Enhanced gas sensing property of Co3O4 matrix nanocomposites with halloysite nanotubes toward triethylamine10.1016/j.jmrt.2023.01.142 ↗
56. Sandwich-like composites of double-layer Co3O4 and reduced graphene oxide and their sensing properties to volatile organic compounds10.1016/j.jallcom.2019.03.386 ↗
57. Ammonia selective sensors based on cobalt spinel prepared by combustion synthesis10.1016/j.ssi.2019.03.026 ↗
58. Exploring monolayer Ta4C3Tx MXene for quick ammonia detection at room temperature10.1016/j.matlet.2024.136250 ↗
59. Role of Cu in the enhancement of NH3 sensing performance of spray pyrolyzed WO3 nanostructures