journal article·2021-01

Preparation and investigation of Al-doped ZnO thin films as a formaldehyde sensor with extremely low detection limit and considering the effect of RH

K. Khojier

Publisher page

Abstract

Abstract It is well known that humidity strongly affects the sensing performance of the resistance-based gas sensors. In the current research, pure and Al-doped ZnO thin films (with different Al contents) were prepared by the spray pyrolysis technique and studied as a formaldehyde sensor. The properties of the sensing materials were researched by X-ray diffraction (XRD) spectra, atomic force microscopy (AFM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The sensing performance of the samples was studied as a function of Al content, temperature, formaldehyde concentration, and relative humidity. The sensing mechanism and the effect of RH on the sensing performance and reliability were also discussed. The investigations revealed that the Al-doping notably improved the sensitivity of the ZnO thin films while an increase in Al content over an optimum content of 2 at% destroyed the sensing performance of the samples due to the increase of the carrier concentration. The results also demonstrated that the sensing performance and reliability of the samples are strongly affected by the RH ≥ 60%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Au@ZnO core–shell structure for gaseous formaldehyde sensing at room temperature10.1016/j.snb.2014.04.004 ↗
2. Formaldehyde in China: production, consumption, exposure levels, and health effects10.1016/j.envint.2009.06.002 ↗
3. In situ diffuse reflectance infrared Fourier transform spectroscopy study of formaldehyde adsorption reactions on nano-Fe2O3films10.1016/j.apsusc.2013.01.038 ↗
4. Detection of hazardous volatile organic compounds (VOCs) by metal oxide nanostructures-based gas sensors: a review10.1016/j.ceramint.2016.06.145 ↗
5. Formaldehyde sensing characteristics of an aluminum-doped zinc oxide (AZO) thin-film-based sensor10.1016/j.snb.2017.09.125 ↗
6. A high sensitivity gas sensor for formaldehyde based on silver doped lanthanum ferrite10.1016/j.snb.2013.08.046 ↗
7. Formaldehyde levels in downtown Mexico City during 200310.1016/j.atmosenv.2004.10.031 ↗
8. Mechanism study of rice straw pyrolysis by Fourier transform infrared technique10.1016/S1004-9541(08)60240-2 ↗
9. Laser-induced fluorescence of formaldehyde in combustion using third harmonic Nd:YAG laser excitation10.1016/S1386-1425(03)00163-X ↗
10. Improving humidity selectivity in formaldehyde gas sensing by a two-sensor array made of Ga-doped ZnO10.1016/j.snb.2009.01.054 ↗
11. Fabrication of a Au@SnO2 core–shell structure for gaseous formaldehyde sensing at room temperature10.1016/j.snb.2013.08.037 ↗
12. Preparation of Cd-loaded In2O3 hollow nanofibers by electro spinning and improvement of formaldehyde sensing performance10.1155/2014/431956 ↗
13. Facile synthesis of pseudo-peanut shaped hematite iron oxide nano-particles and their promising ethanol and formaldehyde sensing characteristics10.1039/C4RA03098B ↗
14. Investigation on formaldehyde gas sensor with ZnO thick film prepared through microwave heating method10.1016/j.snb.2009.07.049 ↗
15. SnO2-nanowires grown by catalytic oxidation of tin sputtered thin films for formaldehyde detection10.1016/j.tsf.2011.10.140 ↗
16. A self-heating gas sensor with integrated NiO thin-film for formaldehyde detection10.1016/j.snb.2006.06.018 ↗
17. Development of a novel hand-held formaldehyde gas sensor for the rapid detection of sick building syndrome10.1016/j.snb.2004.07.010 ↗
18. Improving the H2 gas sensitivity of ZnO thin films by modifying the annealing conditions10.1007/s11664-015-3833-2 ↗
19. Efficient formaldehyde sensor development based on Cu-codoped ZnO nanomaterial by an electrochemical approach10.1016/j.snb.2019.127541 ↗
20. Human requirements in future air-conditioned environments10.1016/S0140-7007(00)00011-6 ↗
21. Gas sensing performance of the spray deposited Cd-ZnO thin films10.1016/j.jallcom.2014.01.200 ↗
22. Warren · 1969
23. Growth and characterization of undoped and aluminium doped zinc oxide thin films for SO2 gas sensing below threshold value limit10.1016/j.apsusc.2019.143724 ↗
24. Effect of structural defects, surface roughness on sensing properties of Al doped ZnO thin films deposited by chemical spray pyrolysis technique10.1016/j.ceramint.2016.11.191 ↗
25. Al doped ZnO thin films; preparation and characterization
26. Chung · 1999
27. Structural, mechanical and tribological characterization of chromium oxide thin films prepared by post-annealing of Cr thin films10.1016/j.apsusc.2013.07.123 ↗
28. Dopant-induced bandgap shift in Al-doped ZnO thin films prepared by spray pyrolysis
29. On the influence of temperature gradient of annealing process on the nano-structure and sensing properties of WO3 thin films to NO2 gas and relative humidity10.1016/j.mssp.2015.08.036 ↗
30. On the dependence of structural and sensing properties of sputteredMoO3thin films on argon gas flow10.1016/j.apsusc.2014.09.046 ↗
31. Fast and low concentration detection of liquefied petroleum gas by Au-activated ZnO sensor10.1016/j.materresbull.2018.08.044 ↗
32. Improving the hydrogen gas sensitivity of WO3 thin films by modifying the deposition angle and thickness of different promoter layers10.1016/j.ijhydene.2017.10.027 ↗
33. Highly formaldehyde-sensitive, transition-metal doped ZnO nanorods prepared by plasma-enhanced chemical vapor deposition10.1016/j.snb.2012.03.035 ↗
34. Acetone sensors with high stability to humidity changes based on Ru-doped NiO flower-like microspheres10.1016/j.snb.2020.127965 ↗
35. Enhanced gas sensing properties of In2O3: Ag composite nanoparticle layers; electronic interaction, size and surface induced effects10.1016/j.snb.2007.02.044 ↗
36. Synthesis characterization, and gas sensing property for HCHO of Ag-doped In2O3 nanocrystalline powders10.1016/j.matchemphys.2009.06.045 ↗
37. Study of sensitivity and selectivity of α-Fe2O3 thin films for different toxic gases and alcohols10.1016/j.mssp.2016.06.016 ↗
38. High sensitive and selective formaldehyde sensors based on nanoparticle-assembled ZnO micro-octahedrons synthesized by homogeneous precipitation method10.1016/j.snb.2011.07.062 ↗
39. Sensor response formula for sensor based on ZnO nanostructures10.1016/j.snb.2009.10.037 ↗
40. Characterization of electrospun ZnO–SnO2 nanofibers for ethanol sensor10.1016/j.sna.2009.06.010 ↗
41. Zinc oxide nanostructures for applications as ethanol sensors and dyesensitized solar cells10.1016/j.apsusc.2009.05.139 ↗
42. Dependence of electrical conductivity of ZnO on degree of sintering10.1111/j.1151-2916.1976.tb09374.x ↗
43. Metrological characteristics of ZnO oxygen sensor at room temperature10.1016/j.snb.2003.12.059 ↗
44. Microstructure, CO gas sensing properties of porous ZnO produced by starch addition10.1016/S0925-4005(97)00316-X ↗
45. Humidity sensing performance of mesoporous CoO(OH) synthesized via one-pot hydrothermal method10.1016/j.snb.2018.10.058 ↗