Fabrication of SrTiO3/g-C3N4 heterostructures for visible light-induced photocatalysis
Source abstract
Abstract
Abstract We investigated a new method for the preparation of visible light-activated heterostructured photocatalysts made up of SrTiO3 (STO) and g-C3N4 (CN). The photocatalysts were synthesized by the polymeric precursor method to obtain STO, which was further thermally treated at 550 °C for 2 h in presence of melamine at different proportions for CN formation. The SrTiO3/g-C3N4 heterostructures were termed as STOCN-Mel88%, STOCN-Mel92%, STOCN-Mel95%, STOCN-Mel97% and STOCN-Mel99% indicating the use of melamine at 88%, 92%, 95%, 97% or 99%. The SrTiO3/g-C3N4 heterostructures were characterized for their crystalline structure, optical properties, thermal stability, morphology and surface composition, and photocatalytic potential, which was evaluated by photodegradation of methylene blue dye and amiloride under visible light. The melamine content exhibited a strong influence on the formation of CN, as well as on the bulk structure, surface and photocatalytic properties of the SrTiO3/g-C3N4 heterostructures. The heterostructures were catalytically active under visible light due to their reduced band gap energy. The presence of oxygen vacancies in the STO phase associated with the CN phase improved the photogenerated electron-hole charge separation in the SrTiO3/g-C3N4 catalysts. The synthesis described here is efficient in obtaining visible light-activated photocatalysts that are applicable to photocatalytic processes under solar light.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Electronic and Structural Properties of Oxides · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. ABO3-based photocatalysts for water splitting10.1016/j.pnsc.2012.12.002 ↗
2. Photoluminescence of SrTiO3: influence of particle size and morphology10.1021/cg301168k ↗
3. SrTi1−yFeyO3 samples obtained by hydrothermal method: the effect of the amount of Fe on structural and photocatalytic properties10.1016/j.mssp.2017.05.033 ↗
4. Rh-doped SrTiO3 photocatalyst electrode showing cathodic photocurrent for water splitting under visible-light irradiation10.1021/ja2050315 ↗
5. Inherent defects in sol-precipitation/hydrothermally derived SrTiO3 nanopowders10.1016/j.ceramint.2013.01.115 ↗
6. In-situ growth of Ag3VO4 nanoparticles onto BiOCl nanosheet to form a heterojunction photocatalyst with enhanced performance under visible light irradiation10.1016/j.jallcom.2016.07.180 ↗
7. Design and fabrication of heterojunction photocatalysts for energy conversion and pollutant degradation10.1016/S1872-2067(14)60170-4 ↗
8. Black phosphorus and polymeric carbon nitride heterostructure for photoinduced molecular oxygen activation10.1002/adfm.201705407 ↗
9. A review on g-C3N4-based photocatalysts10.1016/j.apsusc.2016.07.030 ↗
10. Graphitic carbon nitride quantum dots loaded on leaf-like InVO4/BiVO4 nanoheterostructures with enhanced visible-light photocatalytic activity10.1016/j.jallcom.2016.07.275 ↗
11. Graphene oxide modified g-C3N4 hybrid with enhanced photocatalytic capability under visible light irradiation10.1039/C1JM13490F ↗
12. A fantastic graphitic carbon nitride (g-C3N4) material: electronic structure, photocatalytic and photoelectronic properties10.1016/j.jphotochemrev.2014.04.002 ↗
13. 2D/2D graphitic carbon nitride (g-C3N4) heterojunction nanocomposites for photocatalysis: why does face-to-face interface matter?
14. 2D/2D graphitic carbon nitride/antimonene heterostructure
15. Heterostructured semiconductors: an approach about the main challenges for obtaining and application on environmental and energy photochemical processes
16. Graphitic carbon nitride (g-C3N4) nanocomposites: a new and exciting generation of visible light driven photocatalysts for environmental pollution remediation10.1016/j.apcatb.2016.05.052 ↗
17. g-C3N4/Nb2O5 heterostructures tailored by sonochemical synthesis: enhanced photocatalytic performance in oxidation of emerging pollutants driven by visible radiation10.1016/j.apcatb.2017.05.038 ↗
18. Multifunctional g-C3N4/graphene oxide wrapped sponge monoliths as highly efficient adsorbent and photocatalyst10.1016/j.apcatb.2018.04.061 ↗
19. Semiconductor heterojunction photocatalysts: design, construction, and photocatalytic performances10.1039/C4CS00126E ↗
20. Mixed-cation oxide powders via polymeric precursors
21. Total pattern fitting for the combined size-strain-stress-texture determination in thin film diffraction10.1016/j.nimb.2009.09.053 ↗
22. Evaluation of the Tauc method for optical absorption edge determination: ZnO thin films as a model system10.1002/pssb.201552007 ↗
23. Preparation and band gap energies of ZnO nanotubes, nanorods and spherical nanostructures10.1016/j.powtec.2011.02.005 ↗
24. Synthesis of ZnO nanoparticles assisted by N-sources and their application in the photodegradation of organic contaminants10.1002/cctc.201700756 ↗
25. Biomimetic fabrication of g-C3N4/TiO2 nanosheets with enhanced photocatalytic activity toward organic pollutant degradation10.1016/j.cej.2014.08.072 ↗
26. Bojdys · 2009
27. Determination of crystal structure of graphitic carbon nitride: ab initio evolutionary search and experimental validation10.1021/acs.chemmater.6b02969 ↗
28. Rapid hydrothermal synthesis and pH-dependent photocatalysis of strontium titanate microspheres10.1016/j.mssp.2014.09.022 ↗
29. Band gap evaluations of metal-inserted titânia nanomaterials10.1007/s11051-013-1572-y ↗
30. Deoxidisation and phase analysis of plasma sprayed TiO2 by X-ray Rietveld method10.1016/j.tsf.2004.02.092 ↗
31. Synthesis of novel and stable g-C3N4/N-doped SrTiO3 hybrid nanocomposites with improved photocurrent and photocatalytic activity under visible light irradiation10.1039/C4DT01076K ↗
32. Pavia · 2010
33. Inherent defects in sol-precipitation/hydrothermally derived SrTiO3 nanopowders10.1016/j.ceramint.2013.01.115 ↗
34. Synthesis-Dependent surface acidity and structure of SrTiO3 nanoparticles10.1021/jp101727c ↗
35. Melem (2,5,8-triamino-tri-s-triazine), an important intermediate during condensation of melamine rings to graphitic carbon nitride: synthesis, structure determination by X-ray powder diffractometry, solid-state NMR, and theoretical studies10.1021/ja0357689 ↗
36. Kim · Surf. Interface Anal. · 2007 · 39 · 66510.1002/sia.2575 ↗
37. X-ray photoelectron spectroscopy reference data for identifi cation of the C3N4 phase in carbon-nitrogen films10.1016/S0925-9635(00)00345-9 ↗
38. 1979
39. Interpretation of X-ray photoelectron spectra of carbon-nitride thin films: new insights from in situ XPS10.1016/j.carbon.2016.07.017 ↗
40. Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis10.1016/0008-6223(95)00154-6 ↗
41. Controllable synthesis of nitrogen-doped mesoporous carbons for supercapacitor applications10.1039/C7RA02701J ↗
42. The characterization of activated carbons with oxygen and nitrogen surface groups10.1016/S0008-6223(97)00096-1 ↗
43. Eletronic and ionic transport properties and other physical aspects of perovskites10.1088/0034-4885/67/11/R01 ↗
44. Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications10.1039/c3nr00476g ↗
45. Ag/ZnO heterostructure nanocrystals: synthesis, characterization, and photocatalysis10.1021/ic700688f ↗