journal article·2024-06

On the prospects of using B4C3 as a potential electrode material for lithium-ion batteries

Abdul Majid, Usama Najam, Sheraz Ahmad, Mohammad Alkhedher

Publisher page

Abstract

Lithium-ion batteries (LIBs) served as promising energy-storage solutions for various applications, from portable electronics to electric-vehicles. There is a growing demand for high-performance electrode materials with improved storage capacity, high cyclic stability, low energy barriers, reduced material toxicity, and cost-effectiveness. This study explores the electrochemical feasibility of B 4C 3 monolayer as an anode material for LIBs using density functional theory (DFT) computations and molecular dynamic (MD) simulations. The optimum anodic nature of B 4C 3 is reported based on its structural, electronic, diffusion, storage behaviour, and lithiation studies. The adsorption sites for Li atoms were systematically explored. The lithium saturation requires the adsorption of 29 lithium atoms on B 4C 3 while preserving stability confirmed by Ab-initio molecular dynamics (AIMD) simulations and ensuring favorable transport characteristics during the lithiation process based on Hirshfeld charge analysis and steric interaction calculations. The storage capacity of the host B 4C 3 is calculated as 2770.2 mAhg −1 which is notably higher than that of graphite anode. The computed value of open circuit voltage is 0.62 V per Li. The value of diffusion coefficient and ionic conductivity σ is 0.7 × 10 −8 m 2 /s and 0.78 S/m respectively which predicts excellent overall anodic operation of the material. The transition barrier of the Li ions in the material is determined through Cl-NEB, which shows the lowest value of 0.06 eV along the x-axis.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · MXene and MAX Phase Materials · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. First principles study of layered CrGeTe3 as lithium intercalation compound10.1149/1945-7111/ac6835 ↗
2. Sustainable composites for lightweight and flame retardant parts for electric vehicles to boost climate benefits: a perspective
3. Twidell · 2021
4. A review of rechargeable batteries for portable electronic devices10.1002/inf2.12000 ↗
5. Rechargeable batteries for grid scale energy storage10.1021/acs.chemrev.2c00289 ↗
6. First principles study of layered silicon carbide as anode in lithium ion battery10.1002/qua.26895 ↗
7. Factors limiting Li+ charge transfer kinetics in Li-ion batteries10.1149/2.1221802jes ↗
8. Revisiting the roles of natural graphite in ongoing lithium‐ion batteries10.1002/adma.202106704 ↗
9. All‐impurities scavenging, safe separators with functional metal‐organic‐frameworks for high‐energy‐density Li‐ion battery
10. 2D layered materials for fast‐charging lithium‐ion battery anodes
11. Recent advances and perspectives of microsized alloying-type porous anode materials in high-performance Li-and Na-ion batteries10.20517/energymater.2022.24 ↗
12. Recent advances in inorganic 2D materials and their applications in lithium and sodium batteries10.1039/C6TA09831B ↗
13. Amorphous modulation of atomic Nb‐O/N clusters with asymmetric coordination in carbon shells for advanced sodium‐ion hybrid capacitors
14. Two-dimensional square metal organic framework as promising cathode material for lithium-sulfur battery with high theoretical energy density10.1016/j.jcis.2021.12.045 ↗
15. High-throughput assessment of two-dimensional electrode materials for energy storage devices10.1016/j.xcrp.2021.100718 ↗
16. Recent progress and future perspective on practical silicon anode-based lithium ion batteries10.1016/j.ensm.2022.01.042 ↗
17. Facile synthesis and electrochemical properties of two dimensional layered MoS2/graphene composite for reversible lithium storage10.1016/j.jpowsour.2013.11.060 ↗
18. Graphene and graphene oxide: synthesis, properties, and applications10.1002/adma.201001068 ↗
19. A promising anode material for sodium-ion battery with high capacity and high diffusion ability: graphyne and graphdiyne10.1039/C6RA01870J ↗
20. Ultrafast and directional diffusion of lithium in phosphorene for high-performance lithium-ion battery10.1021/nl504336h ↗
21. Synthesis and defect investigation of two-dimensional molybdenum disulfide atomic layers10.1021/ar500291j ↗
22. Large-area high-quality 2D ultrathin Mo2C superconducting crystals10.1038/nmat4374 ↗
23. Moisture‐enabled electricity from hygroscopic materials: a new type of clean energy
24. Advances in sulfur-doped carbon materials for use as anodes in sodium-ion batteries10.1016/S1872-5805(22)60630-9 ↗
25. Two dimensional borophene nanomaterials: recent developments for novel renewable energy storage applications10.1016/j.progsolidstchem.2023.100416 ↗
26. First-principles study of beryllium substituted borophene as an anode material for Li/Na-ion batteries10.1016/j.cocom.2023.e00845 ↗
27. Scalable production of few-layer boron sheets by liquid-phase exfoliation and their superior supercapacitive performance10.1021/acsnano.7b07444 ↗
28. Predicting two-dimensional boron–carbon compounds by the global optimization method10.1021/ja2072753 ↗
29. Co‐doping graphene with B and N heteroatoms for application in energy conversion and storage devices10.1002/cnma.202200134 ↗
30. Carbon materials in lithium-ion batteries
31. 2D nano-materials beyond graphene: from synthesis to tribological studies10.1007/s13204-020-01466-z ↗
32. Modeling of inert gas sensors using first principles methods10.1109/JSEN.2023.3283959 ↗
33. Emerging 2D-Nanostructured materials for electrochemical and sensing Application-A review10.1016/j.ijhydene.2021.10.044 ↗
34. Two-dimensional BeB2 and MgB2 as high capacity Dirac anodes for Li-ion batteries: a DFT study10.1021/acs.jpcc.2c02563 ↗
35. Metallic B2C monolayer as a promising anode material for Li/Na ion storage10.1016/j.cej.2020.126812 ↗
36. Mahmood · 2020 · vol. 278
37. Senturk · Thermal conductivity and mechanical properties of graphene-like BC2, BC3 and B4C3 · 2020 · 46 · 879
38. Shen · First-Principles Observation of Bonded 2D B4C3 Bilayers · 2021 · 6 · 13218
39. Ofili · 2021
40. First-principles study of the adsorption and diffusion mechanisms of lithium dendrite growth
41. Direct relations between ion diffusion constants and ionic conductivity for lithium electrolyte solutions10.1016/j.electacta.2017.09.051 ↗
42. Li-ion conductivity in Li 9 S 3 N10.1039/C5TA05432J ↗
43. Ab-initio characterization of B4C3 monolayer as a toxic gases sensing material10.1016/j.apsusc.2020.148877 ↗
44. Empowering spintronics performance of 3d transition metal adsorbed B4C3 monolayer: a DFT outlook10.1016/j.jpcs.2023.111599 ↗
45. First-principles insight into a B4C3 monolayer as a promising biosensor for exhaled breath analysis10.1007/s11664-022-09898-9 ↗
46. B4C3 monolayer with impressive electronic, optical, and mechanical properties: a potential metal-free photocatalyst for CO2 reduction under visible light10.1021/acs.jpcc.9b06744 ↗
47. Arsenene monolayer as an outstanding anode material for (Li/Na/Mg)-ion batteries: density functional theory10.1039/C9CP03230D ↗
48. Metallic VS2 monolayer: a promising 2D anode material for lithium ion batteries10.1021/jp410969u ↗
49. Metallic FeSe monolayer as an anode material for Li and non-Li ion batteries: a DFT study10.1039/D0CP00967A ↗
50. A DFT study of TiC3 as anode material for Li-ion batteries10.1016/j.apsusc.2023.158024 ↗
51. Monolayer Zr2B2: a promising two-dimensional anode material for Li-ion batteries10.1016/j.apsusc.2019.02.222 ↗
52. Rational design of h‐AlC monolayer as anode material for Mg‐ion battery: a DFT study10.1002/est2.415 ↗
53. Ultrahigh capacity 2D anode materials for lithium/sodium-ion batteries: an entirely planar B 7 P 2 monolayer with suitable pore size and distribution10.1039/D0TA02767G ↗
54. 2-dimensional biphenylene monolayer as anode in Li ion secondary battery with high storage capacity: acumen from density functional theory10.1016/j.apsusc.2023.157171 ↗
55. YS2 monolayer as a high-efficient anode material for rechargeable Li-ion and Na-ion batteries10.1016/j.ssi.2019.115187 ↗
56. Highly stable TiOF monolayer as anode material for the applications of Li/Na-ion batteries10.1016/j.apsusc.2021.151296 ↗
57. A first-principle study of FeB6 monolayer as a potential anode material for Li-ion and Na-ion batteries10.1016/j.commatsci.2020.110273 ↗
58. Ca2C MXene monolayer as a superior anode for metal-ion batteries10.1088/2053-1583/abf233 ↗
59. Two-dimensional tetragonal Ti2BN: a novel potential anode material for Li-ion batteries10.1016/j.apsusc.2020.145821 ↗
60. Methane activation at the Pd/CeO2 interface10.1021/acscatal.6b02447 ↗
61. Amorphous germanium as a promising anode material for sodium ion batteries: a first principle study10.1007/s10853-018-2661-1 ↗
62. Equation of state calculations by fast computing machines10.1063/1.1699114 ↗
63. Binder · 1992 · vol. 8
64. Diffusion of Li-ions in rutile. An ab initio study10.1016/S0167-2738(02)00186-8 ↗
65. Study of adsorption and dissociation pathway of H2 molecule on MgnRh (n= 1–10) clusters: a first principle investigation10.1016/j.ijhydene.2016.09.007 ↗
66. Screening MXenes for novel anode material of lithium-ion batteries with high capacity and stability: a DFT calculation10.1016/j.apsusc.2021.151050 ↗
67. Understanding the anisotropic strain effects on lithium diffusion in graphite anodes: a first-principles study10.1016/j.physb.2018.03.046 ↗
68. DFT investigation of capacious, ultrafast and highly conductive hexagonal Cr 2 C and V 2 C monolayers as anode materials for high-performance lithium-ion batteries10.1039/C7CP00064B ↗
69. Blue-AsP monolayer as a promising anode material for lithium-and sodium-ion batteries: a DFT study10.1039/D0CP05879C ↗
70. A first principle study of 2D single-layer SiP as anode material for lithium-ion battery and sodium-ion battery10.1039/D3CP05164A ↗
71. Tetragonal BN monolayer: a high-performance anode material for lithium-ion batteries10.1016/j.commatsci.2023.112626 ↗
72. Two dimensional AlB4 as high-performance anode material for Li/Na-ion batteries10.1016/j.apsusc.2023.159024 ↗
73. Exploring the anodic performance of ScSeS and TiSeS monolayers of modified transition metal dichalcogenides for Mg ion batteries via DFT calculations10.1039/D3CP04532C ↗
74. TiNX (X= F, Cl) monolayer as potential anode materials for Li/Na-ion batteries applications10.1016/j.est.2023.110105 ↗