journal article·2017-02

Properties of fluorine-doped tin oxide films prepared by an improved sol-gel process

X.H. Shi, K.J. Xu

Publisher page

Abstract

Abstract Fluorine-doped tin oxide (FTO) films were prepared by an improved sol-gel process, in which FTO films were deposited on glass substrates using evaporation method, with the precursors prepared by the conventional sol-gel method. The coating and sintering processes were combined in the evaporation method, with the advantage of reduced probability of films cracking and simplified preparation process. The effects of F-doping contents and structure of films on properties of films were analyzed. The results showed the performance index ( Φ TC =3.535×10 −3 Ω −1 cm) of the film was maximum with surface resistance ( R sh ) of 14.7 Ω cm −1 , average transmittance (T) of 74.4% when F/Sn=14 mol%, the reaction temperature of the sol was 50 °C, and the evaporation temperature was 600 °C in muffle furnace, and the film has densification pyramid morphology and SnO 2−x F x polycrystalline structure with tetragonal rutile phase. Compared with the commercial FTO films ( Φ TC =3.9×10 −3 Ω −1 cm, R sh =27.4 Ω cm −1 , T=80%) produced by chemical vapor deposition (CVD) method, the Φ TC value of FTO films prepared by an improved sol-gel process is close to them, the electrical properties are higher, and the optical properties are lower.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Electrical conductivity ts and T is the transmittancome heavy metal compounds
2. Effect of textured glass substrates coated with LPCVD-diposited SnO2:f on amorphous silicon solar cells10.1016/j.solmat.2015.04.003 ↗
3. Spray solution flow rate effect on growth, optoelectronic characteristics and photoluminescence of SnO2:f thin films for photovoltaic application10.1016/j.ijleo.2015.02.039 ↗
4. Microstructural and functional stability of large-scale SnO2:f thin film with micro-nano structure10.1016/j.jallcom.2012.09.119 ↗
5. Liu · 2011
6. Room temperature ferromagnetism of Mn-doped SnO2 thin films fabricated by sol–gel method10.1016/j.apsusc.2008.06.026 ↗
7. Influence of dopant concentrations (Mn=1, 2 and 3mol%) on the structural, magnetic and optical properties and photocatalytic activities of SnO2 nanoparticles synthesized via the simple precipitation process10.1016/j.spmi.2015.05.031 ↗
8. Effect of Ta doping on the characteristic features of spray-coated SnO210.1016/j.tsf.2015.10.011 ↗
9. Fabrication of highly conductive Ta-doped SnO2 polycrystalline films on glass using seed-layer technique by pulse laser deposition10.1016/j.tsf.2009.09.187 ↗
10. Fabrication of p-type SnO2 films via pulsed laser deposition method by using Sb as dopant10.1016/j.apsusc.2013.09.107 ↗
11. Properties of Sb-doped SnO2 transparent conductive thin films deposited by radio-frequency magnetron sputtering10.1016/j.tsf.2013.06.077 ↗
12. Improving the performance of nickel-coated fluorine-doped tin oxide thin films by magnetic-field-assisted laser annealing10.1016/j.apsusc.2015.05.094 ↗
13. Fluorine highly doped nanocrystalline SnO2 thin films prepared by SPD technique10.1016/j.matlet.2015.04.130 ↗
14. Effect of glass tempering on microstructure and functional properties of SnO2:f thin film prepared by atmosphere pressure chemical vapor deposition10.1016/j.tsf.2013.02.099 ↗
15. Analysis of critical doping level of sprayed SnO2:f films10.1179/1743294411Y.0000000021 ↗
16. Enhanced transparent-conducting fluorine-doped tin oxide films formed by aerosol-assisted chemical vapour deposition
17. Properties of fluorine-doped SnO2 thin films by a green sol-gel method10.1016/j.mssp.2015.07.047 ↗
18. Electrical properties of FTO nanocrystalline thin film fabricated by sol hydrothermal method
19. Preparation, characterization and electrical properties of fluorine-doped tin dioxide nanocrystals10.1016/j.jcis.2010.02.031 ↗
20. Huang · 2005
21. Highly conductive transparent films of sputtered In2−xSnxO3−y10.1149/1.2403999 ↗
22. New figure of merit for transparent conductors10.1063/1.323240 ↗
23. Synthesis and characterization of nano-crystalline fluorine-doped tin oxide thin films by sol-gel method10.1023/A:1025697322395 ↗
24. Influence of preferred orientation on the electrical conductivity of fluorine-doped tin oxide films
25. Roughness improvement of fluorine-doped tin oxide thin films by using different alcohol solvents10.1016/j.jallcom.2014.05.135 ↗
26. Improving the performance of nickel-coated fluorine-doped tin oxide thin films by magnetic-field-assisted laser annealing10.1016/j.apsusc.2015.05.094 ↗
27. Relation between solution chemistry and morphology of SnO2-based thin films deposited by a pyrosol process10.1016/0040-6090(95)06648-9 ↗
28. Ga-doped ZnO thin film surface characterization by wavelet and fractal analysis10.1016/j.apsusc.2015.12.234 ↗
29. Cu-W thin film characterized by surface fractal and resistivity10.7498/aps.53.900 ↗
30. Box-counting methods to directly estimate the fractal dimension of a rock surface10.1016/j.apsusc.2014.06.152 ↗
31. Effect of substrate temperature on structural, optical and electrical properties of pulsed laser ablated nanostructured indium oxide films10.1016/j.apsusc.2009.05.057 ↗
32. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
33. Some physical properties of F-doped CdO thin films deposited by spray pyrolysis10.1016/S0040-6090(99)00006-1 ↗
34. Textured fluorine-doped tin dioxide films formed by chemical vapour deposition10.1002/chem.201100399 ↗