Improvement of oxide chemical mechanical polishing performance by increasing Ce3+/Ce4+ ratio in ceria slurry via hydrogen reduction
Source abstract
Abstract
Ceria-based abrasive is widely used in the oxide chemical mechanical polishing (CMP) process due to its high polishing performance. Ce 3+ ions on the surface of ceria form a Ce–O–Si chemical bond with surface of the SiO 2 wafer, significantly affecting the material removal rate (MRR). In this study, the ceria surface was reduced by contact with hydrogen gas in a high temperature isothermal environment. Hydrogen gas forms surface hydroxyls on the ceria. Then, the generated hydroxyls form H 2 O and oxygen vacancies occur through the desorption of the H 2O. The color of ceria changed to blue due to a change of the crystal structure by the reduction reaction. The reducing ability of hydrogen gas increased as the reduction temperature increased and the Ce 3+ ion concentration increased by 12.7% under isothermal conditions at 1000 °C. The MRR of reduced ceria was improved by up to 37.7% compared to the original ceria.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Metal Extraction and Bioleaching
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Environment-friendly chemical mechanical polishing for copper with atomic surface confirmed by transmission electron microscopy10.1016/j.colsurfa.2022.130500 ↗
2. Atomic-level flatness on oxygen-free copper surface in lapping and chemical mechanical polishing10.1039/D2NA00405D ↗
3. Shallow trench isolation chemical mechanical planarization: a review
4. Ceria concentration effect on chemical mechanical polishing of optical glass10.1016/j.apsusc.2006.10.074 ↗
5. Chemical processes in glass polishing10.1016/0022-3093(90)90200-6 ↗
6. Mechanism of polishing of SiO2 films by CeO2 particles10.1016/S0022-3093(01)00364-7 ↗
7. Study on the effect of ceria concentration on the silicon oxide removal rate in chemical mechanical planarization10.1016/j.colsurfa.2020.125670 ↗
8. Increase in Ce3+ concentration of ceria nanoparticles for high removal rate of SiO2 in chemical mechanical planarization
9. Improvement of oxide removal rate in chemical mechanical polishing by forming oxygen vacancy in ceria abrasives via ultraviolet irradiation10.1016/j.matchemphys.2021.124967 ↗
10. Reduction of metal oxides by hydrogen10.1021/ja01369a019 ↗
11. Reduction of iron oxides with hydrogen—a review10.1002/srin.201900108 ↗
12. Hydrogen as a reducing agent: state-of-the-art science and technology
13. A kinetics of hydrogen reduction of nickel oxide at moderate temperature10.1007/s12540-019-00261-y ↗
14. Communication—effect of hydrogen water on ceria abrasive removal in post-CMP cleaning
15. Effect of CO2 on the performance of an electrochemical hydrogen compressor10.1016/j.cej.2019.123647 ↗
16. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
17. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
18. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
19. A novel slurry for chemical mechanical polishing of single crystal diamond10.1016/j.apsusc.2021.150431 ↗
20. A novel approach of chemical mechanical polishing for a titanium alloy using an environment-friendly slurry10.1016/j.apsusc.2017.08.064 ↗
21. Crystal structure of blue-colored ceria during redox reactions in a hydrogen atmosphere10.1039/C7CE02035J ↗
22. Agglomeration of nickel oxide particle during hydrogen reduction at high temperature in a fluidized bed reactor10.1016/j.cherd.2021.02.005 ↗
23. Scratch formation and its mechanism in chemical mechanical planarization (CMP)10.1007/s40544-013-0026-y ↗
24. Thermochemical hydrogen production from a two-step solar-driven water-splitting cycle based on cerium oxides10.1016/j.solener.2005.12.005 ↗
25. Modeling of three-way catalyst dynamics for a compressed natural gas engine during lean–rich transitions10.3390/app9214610 ↗
26. Behaviour of ceria under hydrogen treatment: thermogravimetry and in situ X-ray diffraction study10.1039/jm9940401927 ↗
27. Induced changes in ceria by thermal treatments under vacuum or hydrogen10.1016/0022-4596(87)90230-1 ↗
28. Interactions of hydrogen with CeO210.1021/ja004008k ↗
29. Temperature-induced structural transition of ceria by bulk reduction under hydrogen atmosphere10.1039/C8CE00961A ↗
30. Oxygen vacancies and catalysis on ceria surfaces10.1126/science.1113955 ↗
31. A theoretical study of surface reduction mechanisms of CeO2 (111) and (110) by H210.1002/cphc.200600598 ↗
32. Study of reduction processes over cerium oxide surfaces with atomic hydrogen using ultra accelerated quantum chemical molecular dynamics10.1016/j.apsusc.2010.08.028 ↗
33. Physical, chemical and electrochemical properties of pure and doped ceria10.1016/S0167-2738(99)00318-5 ↗
34. Preparation of pure cerium salts and the color of cerium oxide10.1021/ja01935a001 ↗
35. Lattice parameters and densities of rare‐earth oxide doped ceria electrolytes10.1111/j.1151-2916.1995.tb08820.x ↗
36. Effect of rare-earth oxides on fracture properties of ceria ceramics10.1023/B:JMSC.0000040087.37727.cd ↗
37. Enhancement of catalytic activity by UV-light irradiation in CeO2 nanocrystals
38. Europium-doped ceria nanowires as anode for solid oxide fuel cells10.3389/fchem.2020.00348 ↗
39. Adsorption of selected ions on hydrous cerium oxide10.1007/s10967-007-7255-3 ↗
40. A review of the interactions between ceria and H2 and the applications to selective hydrogenation of alkynes10.1016/S1872-2067(19)63509-6 ↗
41. Effect of oxygen vacancies and phases on catalytic properties of hydrogen-treated nanoceria particles10.1088/2053-1591/aaaff4 ↗
42. In situ TEM studies of oxygen vacancy migration for electrically induced resistance change effect in cerium oxides10.1016/j.micron.2009.11.010 ↗
43. Structure and chemistry of epitaxial ceria thin films on yttria-stabilized zirconia substrates, studied by high resolution electron microscopy10.1016/j.ultramic.2017.03.015 ↗
44. Cerium oxide (CeO2-x) nanoparticles with high Ce3+ proportion synthesized by pulsed plasma in liquid10.1016/j.ceramint.2020.07.093 ↗
45. Kim · 2018 · 183
46. Cerium oxide slurries in CMP. Electrophoretic mobility and adsorption investigations of ceria/silicate interaction10.1149/1.1785793 ↗
47. Effect of pH on ceria–silica interactions during chemical mechanical polishing10.1557/JMR.2005.0176 ↗
48. Iler · 1979
49. Ce3+-enriched core–shell ceria nanoparticles for silicate adsorption10.1557/jmr.2017.189 ↗