journal article·2021-11

The influence of Ag and Cu on the electronic and optical properties of ZrO from first-principles calculations

Yong Pan

Publisher page

Abstract

Abstract Although zirconium oxides (Zr–O) are representative functional materials, the wide band gap of ZrO2 limits its applications. Zirconium oxides with low concentration of oxygen maybe improve the electronic interaction in Zr–O system. However, the structure and physical properties of ZrO are not well understood. Here, the structural, electronic and optical properties of ZrO are studied by the first-principles calculations. We further study the influence of Ag and Cu on the electronic and optical properties of ZrO. The result shows that the ZrO shows better thermodynamically stale. Naturally, the structural stability of ZrO is attributed to the symmetrical Zr–O bonds. It is further found that the ZrO shows better electronic properties compared to the ZrO2. In addition, the ZrO exhibits strong ultraviolet behavior due to the role of Zr-4d state. Furthermore, the additive Ag and Cu would improve the electronic jump between the valence band and conduction band. In particular, it is found that the alloying elements of Ag and Cu improve the storage optical properties of ZrO from the analysis of energy loss function.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Influence of substrate bias voltage on structure, mechanical and corrosion properties of ZrO2 thin films deposited by Reactive Magnetron Sputter Deposition10.1016/j.surfcoat.2020.125821 ↗
2. Influence of oxygen vacancies on the electronic and optical properties of zirconium dioxide from first-principles calculations10.1007/s11664-019-07325-0 ↗
3. Influence of oxygen percentage on in vitro bioactivity of zirconia thin films obtained by RF magnetron sputtering10.1016/j.apsusc.2020.147403 ↗
4. Influence of noble metals on the electronic and optical properties of the monoclinic ZrO2: a first-principles study10.1016/j.vacuum.2021.110112 ↗
5. Synthesis and characterization of Bi0.85-xCa0.15ZrxO1.-δ oxygen ion conductors10.1007/s11664-018-6459-3 ↗
6. Electrosprayed cerium oxide nanoparticles10.1007/s11664-018-6246-1 ↗
7. ZrO2 nanoparticles: an industrially viable, efficient and recyclable catalyst for synthesis of pharmaceutically significant xanthene derivatives10.1016/j.vacuum.2018.08.018 ↗
8. Effect of nano-sized ZrO2 on high temperature performance of Mo-ZrO2 alloy10.1016/j.jallcom.2018.07.214 ↗
9. Synthesis and characterization of ZrO2-TiO2 binary oxide semiconductor nanoparticles: application and interparticle electron transfer process10.1016/j.apcata.2007.09.026 ↗
10. Studies of the electronic excitation modifications induced by SHI of Au ions in RF sputtered ZrO2 thin films10.1016/j.mssp.2018.08.021 ↗
11. Formation and control of "intragranular" ZrO2 strengthened and toughened Al2O3 ceramics10.1016/j.ceramint.2019.12.080 ↗
12. Pt-20Rh dispersion strengthened by ZrO2 - microstructure and strength10.1016/j.msea.2019.138305 ↗
13. Studies on structural and optical properties of ZrO2 nanopowder for opto-electronic applications10.1016/j.jallcom.2016.10.002 ↗
14. ZrO2 incorporated polysulfone anion exchange membranes for fuel cell applications10.1016/j.ijhydene.2020.08.175 ↗
15. Hydrogenation of levulinic acid to γ-valerolactone over bifunctional Ru/(AlO)(ZrO)n catalyst: effective control of Lewis acidity and surface synergy
16. From type-II triply degenerate nodal points and three-band nodal rings to type-II Dirac points in centrosymmetric zirconium oxide10.1021/acs.jpclett.7b02642 ↗
17. Experimental and theoretical investigation of origin of mechanical properties and fracture mechanism of Pt3Zr high-temperature material
18. Synthesis WSi2 coating on W substrate by HDS method with various deposition times10.1016/j.apsusc.2020.145551 ↗
19. Influence of vacancy on the elastic properties, ductility and electronic properties of hexagonal C40 MoSi2 from first-principles calculations10.1016/j.vacuum.2020.109438 ↗
20. Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD10.1016/j.surfcoat.2020.125966 ↗
21. Exploring the novel structure, transportable capacity and thermodynamic properties of TiH2 hydrogen storage material10.1002/er.5260 ↗
22. The structure of the metallic quaternary phase ZrTaNO10.3891/acta.chem.scand.08-0627 ↗
23. Influence of alloying elements on the structural stability, elastic, hardness and thermodynamic properties of Mo5SiB2 from first-principles calculations10.1016/j.ceramint.2020.03.233 ↗
24. First-principles study of the effect of Cr and Al on the oxidation resistance of WSi210.1016/j.cplett.2018.03.030 ↗
25. Cr concentration driving the structural, mechanical, and thermodynamic properties of Cr-Al compounds from first-principles calculations
26. The influence of high pressure on the structural stability, Vickers hardness and mechanical properties of Re and Ru dodecaborides10.1002/qua.26130 ↗
27. The vacancy defects and oxygen atoms occupation effects on mechanical and electronic properties of Mo5Si3 silicides10.1088/1572-9494/abe367 ↗
28. Influence of vacancies on the mechanical and thermodynamic properties of TM2B3(TM=Ru and Os) borides from first-principles calculations10.1016/j.ceramint.2019.07.124 ↗
29. First-principles methods using CASTEP10.1524/zkri.220.5.567.65075 ↗
30. Origin of the antioxidation mechanism of RuAl(1 1 0) surface from first-principles calculations10.1016/j.mseb.2020.114580 ↗
31. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Using first-principles calculations in CALPHAD models to determine carrier concentration of the binary PbSe semiconductor10.1007/s11664-018-6819-z ↗
34. The structural, mechanical and thermodynamic properties of the orthorhombic TMAl (TM=Ti, Y, Zr and Hf) aluminides from first-principles calculations10.1016/j.vacuum.2020.109742 ↗
35. Thermoelectric properties prediction of n-type Mg2Si1-x snx compounds by first principles calculation10.1007/s11664-017-5890-1 ↗
36. The structure, mechanical and electronic properties of WSi2 from first-principles investigations10.1016/j.vacuum.2019.06.035 ↗
37. Influence of high pressure on the structure, hardness and brittle-to-ductile transition of NbSi2 ceramics10.1016/j.ceramint.2020.09.073 ↗
38. Exploring the novel structure, elastic and thermodynamic properties of W3Si silicides from first-principles calculations10.1016/j.ceramint.2019.05.076 ↗
39. Insight into the structure dependence on physical properties of the high temperature ceramics TaB2 boride10.1016/j.vacuum.2020.109427 ↗
40. First-principles investigation of structural stability, mechanical and thermodynamic properties of Pt3Zr5 compounds10.1016/j.physb.2021.412936 ↗
41. First-principles investigation on the structures, energies and electronic properties of low-index surfaces of Mg2Pb10.1016/j.matchemphys.2020.124028 ↗
42. Insight of structural stability, elastic anisotropies and thermal conductivities of Y, Sc doped Mg2Pb from first-principles calculations10.1016/j.cplett.2020.137833 ↗
43. Structural prediction and overall performances of CrSi2 disilicides: DFT investigations
44. Adhesion strength and stability of Cu(111)/TiC(111) interface in composite coatings by first principles study10.1016/j.vacuum.2019.04.028 ↗
45. First-principles investigation of the monoclinic NaMnO2 cathode material for rechargeable Na-ion batteries10.1016/j.cap.2018.08.011 ↗
46. Exploring the real ground-state structures of W3Si silicides from first-principles calculations10.1016/j.commatsci.2020.109719 ↗
47. Influence of vacancy on the mechanical, electronic and thermodynamic properties of Mo5SiB2 from first-principles calculations10.1007/s11664-019-07775-6 ↗
48. Effects of Cr2O3 content on microstructure and mechanical properties of Al2O3 matrix composites10.3390/coatings11020234 ↗
49. Origin of enhanced corrosion resistance of Ag and Au doped anatase TiO210.1016/j.ijhydene.2019.02.131 ↗
50. Ab initio prediction of ordered ground-state structures in ZrO2-Y2O310.1103/PhysRevB.77.144104 ↗
51. First-principles study of phase transition and band structure of ZrO2 under pressure10.1016/j.jallcom.2015.05.108 ↗
52. Influence of group III and IV elements on the hydrogen evolution reaction of MoS2 disulfide10.1021/acs.jpcc.1c03152 ↗
53. The influence of N-vacancy on the electronic and optical properties of bulk InN nitrides10.1016/j.mseb.2021.115265 ↗
54. Insight into the vacancy effects on mechanical and electronic properties of V5Si3 silicides from first-principles calculations10.1016/j.jmgm.2020.107600 ↗
55. Noble metal interlayer-doping enhances the catalytic activity of 2H-MoS2 from first-principles investigations10.1016/j.ijhydene.2021.03.202 ↗
56. Prediction of new phase and electrochemical properties of Li2S2 for the application of Li-S batteries10.1021/acs.inorgchem.8b00747 ↗
57. Effect of oxygen concentration on the tension and shear strength of Zr-O system: a first-principles study10.1016/j.jallcom.2018.12.122 ↗
58. The hydrogenation mechanism of PtAl and IrAl thermal barrier coatings from first-principles investigations10.1016/j.ijhydene.2020.04.290 ↗
59. Location-dependent Stone-Wales defect in C/BN heteronanotube: a density functional theory approach10.1016/j.physe.2019.04.023 ↗
60. Insight into the oxidation mechanism of MoSi2: ab-initio calculations10.1016/j.ceramint.2018.07.204 ↗
61. Theoretical and experimental evidence for rGO-4-PP Nc as a metal-free Fenton-like catalyst by tuning the electron distribution10.1039/C7RA12573A ↗
62. Influence of N-vacancy on the electronic and optical properties of bulk GaN from first-principles investigations
63. Effect of Fe doping concentration on photocatalytic performance of CeO2 from DFT insight into analysis10.1063/1.5124317 ↗
64. Sulfur vacancy enhances the electronic and optical properties of FeS2 as the high performance electrode material10.1016/j.jallcom.2020.157662 ↗
65. Structural stability and electronic and optical properties of bulk WS2 from first-principles investigations10.1007/s11664-020-08475-2 ↗
66. Structural, electronic, mechanical and thermodynamic properties of Cr-Si binary silicides from first-principles investigations10.1016/j.vacuum.2020.110024 ↗
67. Enhancement of solar spectrum absorption in single graphene sheets using a plasmonic nanoantenna10.1007/s11664-020-08368-4 ↗
68. First-principles investigation of electronic and optical properties of H-doped FeS210.1002/er.6510 ↗
69. Synthesis, structural, optical and photocatalytic behavior of Sn doped ZnO nanoparticles10.1016/j.mseb.2020.114497 ↗
70. The structural stability and optical properties of NiPt nanomaterial from first-principles investigations10.1016/j.mssp.2020.105306 ↗
71. Synthesis, structural and optical properties of erbium-doped α-Fe2O3 nanoparticles10.1007/s11664-020-08379-1 ↗
72. First-principles investigation of structural, electronic, and optical properties of transition metal-doped C40 CrSi210.1002/qua.26401 ↗
73. Study of the structural and optical properties of nanoparticles of Pr1-xSrxMnO3 (x=0.1, 0.2, 0.3, 0.4 and 0.5) obtained by a modified polymer complex method10.1016/j.mseb.2020.114617 ↗