Cr doped SnS2 nanoflowers: Preparation, characterization and photocatalytic decolorization
Source abstract
Abstract
Abstract The Sn1-xCrxS2 (x = 0, 0.01, 0.03, 0.05 and 0.07) nanoflowers with different molar ratios were prepared via hydrothermal at a low temperature of 180 °C. All samples were characterized by XRD, FT-IR, SEM, EDS, TEM, XPS, UV–vis and PL. The Sn1-xCrxS2 nanoflowers are single-phase wurtzite structure with good crystallinity, which is confirmed by the XRD, and FT-IR results. XPS and EDS results demonstrate that Cr is present in the valence of Cr3+ ions. Based on the SEM and TEM analysis, the size of doped samples is nearly flower-like ~1.5 µm. The band gap of Sn0.95Cr0.05S2 (2.24 eV) is the largest in the doped samples, which displays the most similar to that of the pure SnS2 nanoflowers (2.27 eV). The photocatalytic activity of the Cr doped SnS2 nanoflowers is evaluated towards the decolorization of rhodamine B under visible irradiation with good cyclability and stability. Moreover, the main active species are • OH and h+. Accordingly, Cr doped SnS2 displays super photocatalytic performance in dyes decomposition showing the lowest intensity in the PL spectra with doped optimum 5% Cr concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Investigation on the magnetically separable Zn substituted CoFe2O4 nanoparticles with enhanced photo-fenton degradation10.1166/jnn.2018.15427 ↗
2. Morphology dependent photocatalytic properties of ZnO nanostructures prepared by a carbon-sphere template method10.1166/jnn.2018.15471 ↗
3. Facile microwave-assisted synthesis of SnS2 nanoparticles for visible-light responsive photocatalyst10.1016/j.jiec.2015.06.036 ↗
4. Interconnected tin disulfide nanosheets grown on graphene for Li-Ion storage and photocatalytic applications10.1021/am403905x ↗
5. A comparative study of ZnAl2O4 nanoparticles synthesized from different aluminum salts for use as fluorescence materials10.1038/srep12849 ↗
6. Optical and magnetic properties of diluted magnetic semiconductor Zn0.95M0.05S nanorods prepared by a hydrothermal method10.3139/146.111626 ↗
7. Boosting the photocatalytic performance of Ag2CO3 crystals in phenol degradation via coupling with trace N-CQDs10.1016/S1872-2067(17)62926-7 ↗
8. Integrating plasmonic Au nanorods with dendritic like α-Bi2O3/Bi2O2CO3 heterostructures for superior visible-light-driven photocatalysis10.1016/j.apcatb.2015.11.026 ↗
9. A facile microwave-hydrothermal method to fabricate B doped ZnWO4 nanorods with high crystalline and highly efficient photocatalytic activity10.1016/j.materresbull.2017.06.021 ↗
10. Synthesis and spectroscopic analysis of undoped and Zn doped SnS2 nanostructure by solid state reaction method10.1016/j.mssp.2014.05.048 ↗
11. Low-cost and efficient visible-light-driven CaMg(CO3)2@Ag2CO3 microspheres fabricated via an ion exchange route10.1016/S1872-2067(17)62924-3 ↗
12. Novel fluorinated Bi2MoO6 nanocrystals for efficient photocatalytic removal of water organic pollutants under different light source illumination10.1016/j.apcatb.2017.02.057 ↗
13. Band gap engineering of SnS2 nanosheets by anion–anion codoping for visible-light photocatalysis10.1039/C7RA12058C ↗
14. Carbon-doped SnS2 nanostructure as a high-efficiency solar fuel catalyst under visible light10.1038/s41467-017-02547-4 ↗
15. Easily removable visible-light-driven photocatalyst of nickel modified SnS2 nanosheets for reduction of Cr(VI)10.1016/j.jallcom.2017.10.248 ↗
16. Intermediate band material of titanium-doped tin disulfide for wide spectrum solar absorption10.1021/acs.inorgchem.8b00143 ↗
17. Structural and optical properties of Fe-doped SnS2 nanoflakes prepared by molten salt solid state reaction10.1016/j.mssp.2015.11.009 ↗
18. Structural, optical and photocatalytic properties of Ce-doped SnS2 nanoflakes10.1016/j.solidstatesciences.2015.04.003 ↗
19. Ferromagnetic spin-order in Mg-doped SnS2 nanoflowers prepared by hydrothermal method10.1016/j.jpcs.2016.01.011 ↗
20. Easily removable visible-light-driven photocatalyst of nickel modified SnS2 nanosheets for reduction of Cr(VI)10.1016/j.jallcom.2017.10.248 ↗
21. Enhancement of visible-light-driven photocatalytic reduction of aqueous Cr(VI) with flower-like In3+-doped SnS210.1016/j.jiec.2016.09.024 ↗
22. Biomolecule-assisted fabrication of copper doped SnS2 nanosheet-reduced graphene oxide junctions with enhanced visible-light photocatalytic activity10.1039/C3TA13846A ↗
23. Solid state synthesis and spectral investigations of nanostructure SnS210.1016/j.saa.2014.03.088 ↗
24. Effect of Ni-doping on optical and magnetic properties of solvothermally synthesized ZnS wurtzite nanorods10.1007/s10854-013-1646-8 ↗
25. Prediction of flatband potentials at semiconductor-electrolyte interfaces from atomic electronegativities10.1149/1.2131419 ↗
26. Porous Mn-doped ZnO nanoparticles for enhanced solar and visible light photocatalysis10.1016/j.matdes.2016.04.015 ↗