journal article·2019-08

Influence of different milling media on structural, morphological and optical properties of the ZnO nanoparticles synthesized by ball milling process

Jasvir Singh, Shivani Sharma, Sumedha Soni, Sandeep Sharma, Ravi Chand Singh

Publisher page

Abstract

Abstract ZnO nanoparticles were synthesized by ball milling process using four different milling media namely, DI water, ethanol, iso-propanol and DMF. The influence of these milling media on structural and optical properties of ZnO nanoparticles has been investigated. The X-ray diffraction and SAED analysis have been carried out to reveal structure of ZnO nanoparticles. Crystallite size and micro-strain of nanoparticles have been calculated using Scherer's formula and Williamson-Hall plots. Rietveld refinement of obtained XRD patterns has been carried out for estimation of structural and micro-structural parameters. It has been observed that structural attributes such as lattice parameters, unit cell volume, dislocation density, specific area, bond length and bond angle vary with milling media. Vibrational properties have been investigated with the help of FTIR and Raman spectroscopy. Morphological variation of particles with milling media has been revealed by FESEM and TEM investigation. Optical parameters namely, band gap energy, refractive index, extinction coefficient, dielectric constants, dielectric loss and optical conductivity have been evaluated using UV–Visible spectroscopy. The band gap values of particle synthesized in different milling media have been found in the range of 3.32–3.37 eV. Photoluminescence (PL) spectroscopy of nanoparticles has been performed to investigate the type of defects present. The study reveal that tailoring of structural and optical parameters with milling media can be done by selecting different milling media.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Structural, magnetic and electrical properties of the lithium Ferrite obtained by ball milling and heat treatment10.1007/s13204-014-0297-2 ↗
2. Studies on the dielectric properties of CdS nanoparticles10.1007/s13204-013-0209-x ↗
3. 2-Aminoethanol-mediated wet chemical synthesis of ZnO nanostructures10.1007/s13204-014-0334-1 ↗
4. Change in the morphology of ZnO nanoparticles upon changing the reactant concentration10.1007/s13204-012-0147-z ↗
5. Structural disorder of ball milled, nanosized, Fe doped SnO2: X-ray diffraction and Mossbauer sepectrosocpy characterization10.1007/s10853-011-6088-1 ↗
6. The effect of milling time on the structural, optical and photoluminescence properties of ZnO nanocrystals10.1016/j.ijleo.2017.11.037 ↗
7. Synthesis of iron-doped TiO2 nanoparticles by ball-milling process: the influence of process parameters on the structural, optical, magnetic, and photocatalytic properties10.1007/s10853-014-8453-3 ↗
8. Effect of ball size and powder loading on the milling efficiency of a laboratory-scale wet ball mill10.1016/j.ceramint.2013.04.093 ↗
9. Effects of liquid medium and ball-milling on the surface group and aqueous dispersibility of Si3N4 powder10.1016/S0955-2219(02)00233-9 ↗
10. Effect of ball milling time on microstructure and hardness of porous magnesium/carbon nanofiber composites
11. Effect of ball milling time on the thermoelectric properties of p-type (Bi,Sb)2Te310.1016/j.jallcom.2013.03.062 ↗
12. Correlation between microstructure and optical properties of ZnO nanoparticle ssynthesized by ball milling10.1063/1.2804012 ↗
13. Quick single-step mechanosynthesis of ZnO nanorods and their optical characterization: milling time dependence10.1007/s13204-011-0026-z ↗
14. Single step synthesis of nanocrystalline ZnO via wet-milling10.1016/j.matlet.2010.08.012 ↗
15. Effect of ball size on the milling efficiency of zinc oxide dispersions10.1080/02726351.2016.1248258 ↗
16. Influence of different solvents on portrayal and photocatalytic activity of tin-doped zinc oxide nanoparticles10.1016/j.molliq.2018.03.074 ↗
17. Effect of different solvents on the structural and optical properties of zinc oxide thin films for optoelectronics applications10.1016/j.ceramint.2013.06.065 ↗
18. Influence of milling media on the mechanical alloyed W-0.5 wt.% Ti powder alloy10.1155/2016/7981864 ↗
19. Structural and phase transformations during ball milling of titanium in medium of liquid hydrocarbons10.1134/S0031918X14020057 ↗
20. Synthesis, characterization and dielectric properties of SnO2 thin films10.1016/j.saa.2014.05.035 ↗
21. Enhancement of the refractive index of sputtered zinc oxide thin films through doping with Fe2O310.1016/j.jallcom.2016.08.165 ↗
22. Refractive index controlled by film morphology and free carrier density in undoped ZnO through sol-pH variation10.1016/j.ijleo.2018.01.011 ↗
23. Europium incorporation dynamics and some physical investigations within ZnO sprayed thin films10.1016/j.mssp.2015.11.005 ↗
24. The effect of sodium polyanetholsulfonate on the precipitation of zinc oxide10.1016/j.jallcom.2016.10.111 ↗
25. Structural and optical properties of ZnO nanoparticles prepared by direct precipitation method10.1016/j.spmi.2015.05.007 ↗
26. Structural, morphological, physical and dielectric properties of Mn doped ZnO nanocrystals synthesized by sol–gel method10.1016/j.matdes.2016.02.016 ↗
27. A correlation between structural and optical properties of cobalt oxide nanoparticles for various annealing conditions10.1007/s00339-012-6938-y ↗
28. Transition metal (Co, Mn) co-doped ZnO nanoparticles: effect on structural and optical properties10.1016/j.jallcom.2016.12.227 ↗
29. Understanding the role of iron in the magnetism of Fe doped ZnO nanoparticles10.1039/C5CP01408E ↗
30. Comparison of ball milling hydrothermal and hydrothermal methods for synthesis of ZnO nanostructures and evaluation of their photocatalytic performance10.1016/j.jiec.2018.01.004 ↗
31. X-ray peak profile analysis of solid-state sintered alumina doped zinc oxide ceramics by Williamson–Hall and size-strain plot methods10.1016/j.jascer.2017.02.001 ↗
32. ZnO nanostructured thin films: structural and optical properties controlled by ruthenium content10.1016/j.spmi.2013.12.017 ↗
33. Characterization of Mg-containing hydroxyapatites synthesized by combustion method10.1016/j.physb.2018.02.007 ↗
34. Influence of Bi doping on the structure and photoluminescence of ZnO phosphor synthesized by the combustion method10.1016/j.saa.2017.09.026 ↗
35. Synthesis, growth mechanism, optical properties and catalytic activity of ZnO microcrystals obtained via hydrothermal processing10.1039/C7RA03277C ↗
36. Exploring structural and magnetic properties of nanocrystalline iron oxide synthesized by autocombustion method10.1016/j.spmi.2014.11.012 ↗
37. Effect of processing parameters on microstructural properties of lead magnesium niobates10.1107/S2052520617012872 ↗
38. Influence of Mn substitution on crystal structure and magnetocrystalline anisotropy of nanocrystalline Co1-xMnxFe2-2xMn2xO410.1007/s13204-012-0071-2 ↗
39. Effect of alcohol solvents on TiO2 films prepared by sol–gel method10.1016/j.surfcoat.2017.07.068 ↗
40. Structural, optical and magnetic properties of sol–gel derived ZnO:Co diluted magnetic semiconductor nanocrystals: an EXAFS study10.1039/C3TC31834F ↗
41. Deposition, characterization and gas sensors application of RF magnetron-sputtered terbium-doped ZnO films10.1007/s10853-017-1059-9 ↗
42. Combustion synthesis, characterization and Raman studies of ZnO nanopowders10.1016/j.saa.2011.05.043 ↗
43. Low-temperature magnetic properties of vanadium-doped ZnO nanoparticles10.1007/s10948-017-4537-z ↗
44. Strain induced phase formation, microstructural evolution and Band gap narrowing in strained TiO2 nanocrystals grown by ball milling10.1016/j.jallcom.2016.03.154 ↗
45. Crystallographic tool box (CrysTBox): automated tools for transmission electron microscopists and crystallographers10.1107/S1600576715017252 ↗
46. Characterization and study of antibacterial activity of spray pyrolysed ZnO:Al thin films10.1007/s13204-015-0493-8 ↗
47. Influence of optical band gap and particle size on the catalytic properties of Sm/SnO2–TiO2 nanoparticles10.1016/j.spmi.2015.01.038 ↗
48. Investigation of the optical property and photocatalytic activity of mixed phase nanocrystalline titania10.1007/s13204-013-0264-3 ↗
49. Structural, spectral and electrical properties of green synthesized ZnS nanoparticles using Elaeocarpus floribundus leaf extract10.1007/s10854-015-3137-6 ↗
50. Study of structural and optical properties of cupric oxide nanoparticles10.1007/s13204-015-0499-2 ↗
51. Electrical conductivity and optical properties of ZnO nanostructured thin film10.1016/j.apsusc.2008.11.055 ↗
52. A rapid and versatile method for solvothermal synthesis of Sb2O3 nanocrystals under mild conditions10.1007/s13204-012-0156-y ↗
53. Optical band gap tuning in nanocrystalline ZnO:Y films via forming defect-induced localized bands10.1016/j.matdes.2018.03.042 ↗
54. Influence of copper incorporation on the structural and optical properties of ZnO nanostructured thin films10.1016/j.spmi.2013.07.005 ↗
55. Thermal annealing effect on the structural and the optical properties of Nano CdTe films10.1016/j.ijleo.2015.04.048 ↗
56. Comparative study on gas sensing properties of rare earth (Tb, Dy and Er) doped ZnO sensor10.1016/j.jpcs.2017.02.004 ↗