Prediction of sawing force for single-crystal silicon carbide with fixed abrasive diamond wire saw
Source abstract
Abstract
Abstract Fixed abrasive diamond wire saw has been used to cut hard-and-brittle materials into wafers, such as silicon carbide. The force of a single abrasive determines the cutting depth, and affects material removal mode and crack propagation length. Therefore, the sawing force is a key factor that affects the surface/subsurface quality of wafers. In this paper, a numerical sawing force predicting method considering wire saw parameters was proposed with the combination of both ductile removal and brittle fracture removal for each single abrasive. A new calculation method of single abrasive cutting force considering frictional force component and new material removal way considering the effect of lateral crack were adopted. Then the influences of process parameters and wire parameters on sawing force were analyzed. Finally, mathematical sawing force formulas described by both process parameters and wire saw parameters were obtained using the new sawing force prediction method. The validity of this prediction method and sawing force formulas was verified through experiments in the literature under the same process parameters and wire saw parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Microstructure and mechanical properties of silicon carbide processed by spark plasma sintering (SPS)10.1016/j.ceramint.2012.05.003 ↗
2. Processing and properties of macroporous silicon carbide ceramics: a review10.1016/j.jascer.2013.07.003 ↗
3. Fixed abrasive diamond wire machining—part I: process monitoring and wire tension force10.1016/S0890-6955(02)00215-8 ↗
4. Experiment study on electroplated diamond wire saw slicing single-crystal silicon10.1016/j.mssp.2016.08.003 ↗
5. Comparison of diamond wire cut and silicon carbide slurry processed silicon wafer surfaces after acidic texturisation10.1016/j.mssp.2014.03.046 ↗
6. On the nature and removal of saw marks on diamond wire sawn multicrystalline silicon wafers10.1016/j.mssp.2014.06.049 ↗
7. Friction behavior in nanoscratching of reaction bonded silicon carbide ceramic with Berkovich and sphere indenters10.1016/j.triboint.2016.01.013 ↗
8. for machining brittle materials10.1115/1.2899676 ↗
9. Deformation and removal characteristics in nanoscratching of 6H-SiC with Berkovich indenter10.1016/j.mssp.2014.11.034 ↗
10. Elastic/Plastic Indentation damage in ceramics: the lateral crack system10.1111/j.1151-2916.1982.tb10782.x ↗
11. Relationship between the grit cut depth and process parameters in electroplated diamond wire sawing KDP crystal
12. A macroscopic mechanical model of the wire sawing process10.1016/j.ijmachtools.2011.05.005 ↗
13. Investigation into influence of feed speed on surface roughness in wire sawing10.1080/10426914.2014.984211 ↗
14. Discrete element simulation of micromechanical removal processes during wire sawing10.1016/j.wear.2013.04.026 ↗
15. Generation of diamond wire sliced wafer surface based on the distribution of diamond grits10.1007/s12541-014-0401-2 ↗
16. Depth of cut per abrasive in fixed diamond wire sawing10.1007/s00170-015-7089-z ↗
17. Depth of cut for single abrasive and cutting force in resin bonded diamond wire sawing
18. Study of ductile-to-brittle transition in single grit diamond scribing of silicon: application to wire sawing of silicon wafers10.1115/1.4006177 ↗
19. Effect of crystal defects on mechanical properties relevant to cutting of multicrystalline solar silicon10.1016/j.mssp.2013.05.016 ↗
20. Understanding the friction and wear of KDP crystals by nanoscratching10.1016/j.wear.2014.11.032 ↗
21. Three-dimensional shape modeling of diamond abrasive grains measured by a scanning laser microscope10.4028/www.scientific.net/KEM.238-239.131 ↗
22. The wear of grinding wheels: Part 1—Attritious wear10.1115/1.3428051 ↗
23. Friction, deformation and fracture of single-crystal silicon carbide10.1080/05698197908982905 ↗
24. Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers10.1081/AMP-120029960 ↗
25. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
26. The response of solids to elastic/plastic indentation I. stresses and residual stresses10.1063/1.329930 ↗
27. Study on cutting force model in ultrasonic vibration assisted side grinding of zirconia ceramics10.1016/j.ijmachtools.2016.01.004 ↗
28. Material removal of optical glass BK7 during single and double scratch tests10.1016/j.wear.2010.10.064 ↗
29. Elastic stress fields caused by indenting brittle materials10.1080/01418618208236917 ↗
30. Basic singular thermoelastic solutions for a crack10.1007/BF00035156 ↗
31. Surface characterization of 6H–SiC (0001) substrates in indentation and abrasive machining10.1016/j.ijmachtools.2003.12.006 ↗
32. Characterization of diamond wire-cutting performance for lifetime estimation and process optimization10.1007/s12206-016-0139-0 ↗
33. Experimental investigation on the machining characteristics of single-crystal SiC sawing with the fixed diamond wire10.1007/s00170-015-7250-8 ↗