Role of substrate temperature on MoO3 thin films by the JNS pyrolysis technique for P–N junction diode application
Source abstract
Abstract
Abstract Molybdenum trioxide (MoO3) thin films were prepared at different substrate temperatures from 350 to 500 °C by the jet nebulizer spray (JNS) pyrolysis technique. The effect of the substrate temperature on the structural, optical and electrical properties of MoO3 films was characterized. The XRD pattern exposed that the crystallite size of the films increases with the increase in the substrate temperature. The SEM images showed the conversion of nanorods to sub-microsized plate-like structures by increasing the substrate temperature. The EDX analysis confirmed the presence of Mo and O elements. The UV–vis results revealed that the band gap obtained shows a decreasing trend on increasing the substrate temperature. The FTIR spectra confirmed the formation of MoO3. The dc electrical studies portrayed the minimum activation energy of 0.064 eV obtained for higher substrate temperature. The P–N diode of p-Si/n-MoO3 was fabricated at the substrate temperature of 500 °C. The diode parameters such as ideality factor (n), barrier height (Φb) and reverse saturation current (I0) values were calculated in darkness and under different light sources (Halogen and Metal halide lamps).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Molybdenum trioxide (MoO3)/silicon photodiodes10.1063/1.90973 ↗
2. Electrochromic properties of nanocrystalline MoO3 thin films10.1016/j.tsf.2007.09.019 ↗
3. Hydrothermal synthesis of α-MoO3 nanorods via acidification of ammonium heptamolybdate tetrahydrate10.1021/cm0206237 ↗
4. Gas sensing properties of nanos tructured MoO3 thin films prepared by spray pyrolysis10.1016/j.physb.2011.12.064 ↗
5. Structural and optical properties of MoO3 and V2O5 thin films prepared by spray pyrolysis10.1016/j.cattod.2005.11.072 ↗
6. Optical, structural and electrochromic studies of molybdenum oxide thin films with nanorod structure10.1016/j.solidstatesciences.2009.10.021 ↗
7. Optical, structural and photoelectron spectroscopic studies on amorphous and crystalline molybdenum oxide thin films10.1016/j.solmat.2003.12.007 ↗
8. Correlation between structure, stress and optical properties in direct current sputtered molybdenum oxide films10.1016/S0040-6090(03)00068-3 ↗
9. Carbon monoxide response of molybdenum oxide thin films deposited by different techniques10.1016/S0925-4005(00)00484-6 ↗
10. Structure and chemical properties of molybdenum oxide thin films10.1116/1.2747628 ↗
11. Investigation of CVD molybdenum oxide films10.1016/S0167-577X(01)00486-4 ↗
12. Preparation of molybdenum oxide thin films by MOCVD10.1016/j.jallcom.2006.08.227 ↗
13. Optical characterization of MoO3 thin films produced by continuous wave CO2 laser-assisted evaporation10.1016/j.tsf.2004.10.027 ↗
14. Growth of MoO3 films by oxygen plasma assisted molecular beam epitaxy10.1016/S0040-6090(02)00487-X ↗
15. Deposition and optoelectronic properties of ITO (In2O3:Sn) thin films by jet nebulizer spray (JNS) pyrolysis technique10.1007/s10854-011-0553-0 ↗
16. Bestimmung der Grösse und der inneren Struktur von Kolloidteilchen mittels Rontgenstrahlen
17. Influence of substrate temperature on the properties of CeO2 thin films by simple nebulizer spray pyrolysis technique10.1016/j.ceramint.2013.06.020 ↗
18. Effect of substrate temperature on the structural and optical properties of MoO3 thin films prepared by spray pyrolysis technique10.1016/S0921-5107(02)00385-9 ↗
19. Self-assembly and photoluminescence of molybdenum oxide nanoparticles10.1007/s00339-011-6345-9 ↗
20. Novel coral-like hexagonal MoO3 thin films: Synthesis and photochromic properties10.1016/j.mssp.2014.03.055 ↗
21. Photochromism induced in an electrolytically pretreated MoO3 thin films by visible light10.1038/355624a0 ↗
22. Physical properties of evaporated molybdenum oxide films10.1016/0040-6090(96)08617-8 ↗
23. Thermal stability of amorphous molybdenum trioxide films prepared at different oxygen partial pressures by reactive DC magnetron sputtering10.1016/j.vacuum.2006.08.006 ↗
24. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
25. The synthesis of α-MoO3 by ethylene glycol10.3390/ma6104609 ↗
26. Characterization of orthorhombic α-MoO3 microplates produced by a microwave plasma process10.1155/2012/930763 ↗
27. Preparation and characterization of molybdenum oxide thin films by sol-gel process10.1023/A:1024021003825 ↗
28. Investigation on structural, thermal, optical and sensing properties of meta-stable hexagonal MoO3 nanocrystals of one dimensional structure10.3762/bjnano.2.62 ↗
29. M. Manickam, V. Ponnuswamy, C. Sankar, R. Mariappan, R. Suresh, Influence of substrate temperature on the properties of cobalt oxide thin films prepared by nebulizer spray pyrolysis (NSP) technique, 2015. 10.1007/s12633-015-9316-5.10.1007/s12633-015-9316-5 ↗
30. Preparation of MoO3 thin films by spray pyrolysis and its gas sensing performance
31. Alternating current electrical properties and I–V (current–voltage) characteristics of molybdenum trioxide film under dc bias10.1063/1.1661801 ↗
32. Sze · 2001 · 224
33. Effect of 6MeV irradiation on electrical characteristics of the Au/n-Si/Al schottky diode10.1016/j.mee.2008.08.002 ↗
34. Rhoderick · 1988
35. Experimental analysis and theoretical model for anomalously high ideality factors in ZnO/diamond p–n junction diode10.1063/1.1689397 ↗
36. Incorporation of Al3+ on the rectification properties of ADC thin films10.1016/j.ceramint.2014.10.152 ↗