3D printing in lithium battery manufacturing: Opportunities, challenges, and perspectives
Source abstract
Abstract
Three-dimensional (3D) printing is emerging as a transformative manufacturing route for lithium batteries, enabling structural and compositional control far beyond the limits of conventional coating and stacking methods. This review critically surveys advances in 3D printing techniques used for lithium batteries, including direct ink writing, laser powder bed fusion, photopolymerization-based printing, and fused-deposition modeling. These approaches have been applied to fabricate electrodes, solid electrolytes (SEs), current collectors, and thermal-management components. 3D-printed architectures, such as gyroid copper collectors and graphene aerogel electrodes, exemplify how tailored geometry and porosity enhance ion/electron transport, mechanical robustness, and dendrite-free cycling. Despite these advances, challenges remain in printable materials chemistry, sub-100 µm structural fidelity, and interfacial integrity across dissimilar layers. Balancing high ceramic loading (>70 wt%) with rheological stability, while maintaining low interfacial resistance, is a key scientific and engineering bottleneck. To address these complex trade-offs, data-driven and AI-assisted strategies, such as Gaussian-process optimization for ink formulation and generative modeling for microstructure design, are emerging to accelerate this convergence of materials discovery and process optimization. Looking forward, progress will rely on co-developing multifunctional printable materials (ionogels, sulfur copolymers, hybrid electrolytes), hybrid 3D-printing workflows coupling sintering, coating, and curing, and standardized evaluation metrics linking laboratory demonstrations to scalable production. Building on these foundations, 3D printing is poised to evolve from a prototyping technique into a disruptive manufacturing paradigm for next-generation lithium batteries powering flexible electronics, electric vehicles, and grid-scale energy storage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Net-zero emission targets for major emitting countries consistent with the Paris Agreement10.1038/s41467-021-22294-x ↗
2. The strategic role of lithium in the green energy transition: Towards an OPEC-style framework for green energy-mineral exporting countries (GEMEC)10.1016/j.resourpol.2024.104737 ↗
3. Energy consumption of current and future production of lithium-ion and post lithium-ion battery cells10.1038/s41560-023-01355-z ↗
4. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
5. Toward Sustainable All Solid-State Li-Metal Batteries: Perspectives on Battery Technology and Recycling Processes
6. LixCoO2 (0< x<-1): A new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
7. High-Temperature Sintering of Garnet Solid Electrolyte Li7La3Zr2O12: A Comparative Study of Induction Hot Pressing and Spark Plasma Sintering10.1002/smll.202506257 ↗
8. Ultrasonic Welding of Garnet Solid Electrolytes to Lithium Metal: Achieving Intimate Interfacial Contact in Seconds,10.1002/sstr.202500866 ↗
9. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
10. A lithium superionic conductor10.1038/nmat3066 ↗
11. A mechanistic investigation of the Li10GeP2S12|LiNi1-x-yCoxMnyO2 interface stability in all-solid-state lithium batteries10.1038/s41467-021-26895-4 ↗
12. Solid solvation structure design improves all-solid-state organic batteries10.1038/s41557-025-01866-0 ↗
13. Solid Halide Electrolytes with High Lithium-Ion Conductivity for Application in 4 V Class Bulk-Type All-Solid-State Batteries10.1002/adma.201803075 ↗
14. Ceramic-Based Flexible Sheet Electrolyte for Li Batteries10.1021/acsami.9b21251 ↗
15. Ionic liquid-containing cathodes empowering ceramic solid electrolytes10.1016/j.isci.2022.103896 ↗
16. Current and future lithium-ion battery manufacturing10.1016/j.isci.2021.102332 ↗
17. Challenges in speeding up solid-state battery development10.1038/s41560-023-01208-9 ↗
18. Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure10.1038/s41560-020-00748-8 ↗
19. 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review10.1002/smll.202302718 ↗
20. Real-Time Metrology for Roll-To-Roll and Advanced Inline Manufacturing: A Review10.1002/admt.202200173 ↗
21. Electrostatically-assisted direct ink writing for additive manufacturing
22. Single-step laser-printed integrated sulfur cathode toward high-performance lithium-sulfur batteries10.1038/s41467-025-57755-0 ↗
23. A Metal-Organic Framework of Organic Vertices and Polyoxometalate Linkers as a Solid-State Electrolyte10.1021/jacs.9b10418 ↗
24. 3D Printing Manufacturing of Lithium Batteries: Prospects and Challenges toward Practical Applications10.1002/adma.202310396 ↗
25. Rethinking the Electrode Multiscale Microstructures: A Review on Structuring Strategies toward Battery Manufacturing Genome10.1002/aenm.202301385 ↗
26. Recent advancement in 3-D printing: nanocomposites with added functionality10.1007/s40964-021-00232-z ↗
27. Insights into architecture, design and manufacture of electrodes for lithium-ion batteries10.1016/j.matdes.2022.111208 ↗
28. 3D printing-enabled advanced electrode architecture design10.1002/cey2.114 ↗
29. Recyclable 3D‐Printed Aqueous Lithium‐Ion Battery10.1002/aesr.202300029 ↗
30. 3D-Printed Thermoplastic Polyurethane Electrodes for Customizable, Flexible Lithium-Ion Batteries with an Ultra-Long Lifetime10.1002/smll.202301604 ↗
31. 3D Printing of Graphite Electrode for Lithium-Ion Battery with High Areal Capacity10.1002/ente.202100628 ↗
32. Multifunctional aramid-based composite quasi-solid-state electrolytes for flexible structure batteries10.1016/j.jcis.2024.11.071 ↗
33. 3D Printing of Customized Li-Ion Batteries with Thick Electrodes10.1002/adma.201703027 ↗
34. Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries10.1002/adma.201800615 ↗
35. 3D Printing Nanostructured Solid Polymer Electrolytes with High Modulus and Conductivity10.1002/adma.202204816 ↗
36. High-Loaded Electrode Filaments for Additive Manufacturing of Structural Batteries10.1002/aenm.202301704 ↗
37. 3D printing of self-supported solid electrolytes made of glass-derived Li1.5Al0.5Ge1.5P3O12 for all-solid-state lithium-metal batteries10.1039/D3TA01435E ↗
38. Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions10.1007/s40964-021-00257-4 ↗
39. Surface characteristics enhancement and morphology evolution of selective-laser-melting (SLM) fabricated stainless steel 316L by laser polishing10.1016/j.optlastec.2023.109246 ↗
40. Cork photocurable resin composite for stereolithography (SLA): Influence of cork particle size on mechanical and thermal properties
41. Fused deposition modeling based polymeric materials and their performance: A review10.1002/pc.26275 ↗
42. Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges10.1016/j.compositesb.2021.109249 ↗
43. Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications10.1002/adma.202105015 ↗
44. A semi-analytical thermal modelling approach for selective laser melting
45. Thermal response analysis and parameter prediction of additively manufactured polymers10.1016/j.applthermaleng.2022.118533 ↗
46. Printability Metrics in Direct Ink Writing: Critical Review of the Literature and Novel Perspective Based on Dimensional Analysis10.1002/admt.202501282 ↗
47. Direct ink writing of conductive materials for emerging energy storage systems10.1007/s12274-022-4200-2 ↗
48. Effect of laser power on hydrogen embrittlement and microstructural evolution in selective laser melted 304L austenitic stainless steel10.1016/j.corsci.2025.112814 ↗
49. Achieving high strength and ductility in a 3D-printed high entropy alloy by cooperative planar slipping and stacking fault10.1016/j.msea.2022.143106 ↗
50. Machinability of 3D printed metallic materials fabricated by selective laser melting and electron beam melting: A review10.1016/j.jmapro.2022.06.023 ↗
51. Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives10.1016/j.eng.2019.07.002 ↗
52. In-process sensing in selective laser melting (SLM) additive manufacturing10.1186/s40192-016-0045-4 ↗
53. Regulating Lithium Deposition via 3D Printed Current Collectors with Dual-Scale Roughness10.1021/acsami.5c02407 ↗
54. Morphology, microstructure, and phase states in selective laser sintered lithium ion battery cathodes10.1016/j.jmatprotec.2020.116827 ↗
55. Scanning strategy in selective laser melting (SLM): a review10.1007/s00170-021-06810-3 ↗
56. Additive manufacturing of ceramics: Advances, challenges, and outlook10.1016/j.jeurceramsoc.2023.07.033 ↗
57. Direct Ink Writing of Carbon-Doped Polymeric Composite Ink: A Review on Its Requirements and Applications, 3D Print Addit
58. Breakthrough to the pragmatic evolution of direct ink writing: progression, challenges, and future10.1007/s40964-023-00399-7 ↗
59. Binder stabilization and rheology optimization for vat-photopolymerization 3D printing of silica-based ceramic mixtures10.1016/j.jeurceramsoc.2022.11.032 ↗
60. Direct-ink writing 3D printed energy storage devices: From material selectivity, design and optimization strategies to diverse applications10.1016/j.mattod.2022.03.014 ↗
61. Innovations in hydrogel-based manufacturing: A comprehensive review of direct ink writing technique for biomedical applications10.1016/j.cis.2024.103095 ↗
62. Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review10.3389/fmats.2021.647229 ↗
63. Recent advances in development of additively manufactured thermosets and fiber reinforced thermosetting composites: Technologies, materials, and mechanical properties10.1016/j.compositesa.2023.107584 ↗
64. Three-dimensional printing of graphene-based materials for energy storage and conversion10.1002/sus2.27 ↗
65. A systematic printability study of direct ink writing towards high-resolution rapid manufacturing10.1088/2631-7990/acd090 ↗
66. Fabrication of polyetheretherketone (PEEK)-based 3D electronics with fine resolution by a hydrophobic treatment assisted hybrid additive manufacturing method10.1088/2631-7990/acd826 ↗
67. Fused deposition modeling 3D printing of polyamide-based composites and its applications10.1016/j.coco.2020.100413 ↗
68. Prototyping high-fidelity multifunctional objects using single-nozzle multi-filament additive manufacturing system with active mixing10.1016/j.matdes.2024.113479 ↗
69. High energy density lithium batteries via 3D printing technologies: A review10.1016/j.jpowsour.2025.237817 ↗
70. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering10.1016/j.biomaterials.2012.04.050 ↗
71. Additive manufacturing by digital light processing: a review10.1007/s40964-022-00336-0 ↗
72. Advances in precision microfabrication through digital light processing: system development, material and applications
73. 3D-printed self-healing hydrogels via Digital Light Processing10.1038/s41467-021-22802-z ↗
74. Photoresist Development for 3D Printing of Conductive Microstructures via Two-Photon Polymerization10.1002/adma.202409326 ↗
75. New Frontiers in Materials and Technologies for 3D Two Photon Polymerization10.1002/adfm.202305697 ↗
76. High-resolution two-photon polymerization: the most versatile technique for the fabrication of microneedle arrays10.1038/s41378-021-00298-3 ↗
77. High-Throughput Two-Photon 3D Printing Enabled by Holographic Multi-Foci High-Speed Scanning10.1021/acs.nanolett.4c00505 ↗
78. Two-photon polymerization-based 3D micro-scaffolds toward biomedical devices
79. Two-photon polymerization based 4D printing of poly(N-isopropylacrylamide) hydrogel microarchitectures for reversible shape morphing10.1038/s41598-025-06269-2 ↗
80. A study on effects of curing and machining conditions in post-processing of SLA additive manufactured polymer10.1016/j.jmapro.2024.03.112 ↗
81. Resin, cure, and polymer properties of photopolymerizable resins containing bio-derived isosorbide10.1002/app.50574 ↗
82. Formlabs, Form 4: Masked stereolithography (MSLA) 3D printer, Formlabs website, https://formlabs.com/3d-printers/form-4/ (accessed on March 25, 2026).
83. Novel rechargeable 3D-Microbatteries on 3D-printed-polymer substrates: Feasibility study10.1016/j.electacta.2018.01.197 ↗
84. Design, Development and Experimental Investigation of E-jet Based Additive Manufacturing Process10.1016/j.matpr.2017.11.405 ↗
85. The effect of viscosity and surface tension on inkjet printed picoliter dots10.1039/C9RA04993B ↗
86. Additive Manufacturing of Batteries10.1002/adfm.201906244 ↗
87. 3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques10.3390/ma17235904 ↗
88. Formulating Interfacial Impedances for Designing High-Energy and High-Power All-Solid-State Battery Cathodes10.1021/acsami.4c01322 ↗
89. Ionic conductivity and ion transport mechanisms of solid-state lithium-ion battery electrolytes: A review10.1002/ese3.1163 ↗
90. Li-ion battery charge transfer stability studies with direct current impedance spectroscopy10.1016/j.egyr.2023.03.002 ↗
91. Factors Limiting Li Charge Transfer Kinetics in Li-Ion Batteries10.1149/2.1221802jes ↗
92. Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries10.1002/adma.201800615 ↗
93. 3D printing strategies and mechanical performance assessment of continuous basalt-fibre/PA12 composites with high fibre volume fraction10.1016/j.polymertesting.2025.108936 ↗
94. Emerging application of 3D-printing techniques in lithium batteries: From liquid to solid10.1016/j.mattod.2022.07.016 ↗
95. Advanced electrode processing of lithium ion batteries: A review of powder technology in battery fabrication10.1016/j.partic.2020.12.003 ↗
96. Low-Temperature Deposition Manufacturing: A Versatile Material Extrusion-Based 3D Printing Technology for Fabricating Hierarchically Porous Materials
97. Toward high areal energy and power density electrode for Li-ion batteries via optimized 3D printing approach10.1021/acsami.8b14797 ↗
98. Low-Temperature Deposition Manufacturing: A Versatile Material Extrusion-Based 3D Printing Technology for Fabricating Hierarchically Porous Materials
99. Emerging application of 3D-printing techniques in lithium batteries: From liquid to solid10.1016/j.mattod.2022.07.016 ↗
100. Strategies and Challenge of Thick Electrodes for Energy Storage: A Review10.3390/batteries9030151 ↗