journal article·2026-01Open access

Micro-supercapacitors of exceptionally high capacitance fabricated using intrinsically stable MXene inks via electrohydrodynamic jet printing

Shahzaib Ali, Shaheer Mohiuddin Khalil, Faisal Shahzad, Busi Im, Tanveer Hussain, Komsilp Kotmool, Vu Dat Nguyen, Hassan A. Arafat, Dae-Hyun Cho, Doyoung Byun

Abstract

MXenes hold tremendous promise as printable conductive inks for microelectronic devices, due to their excellent electrical conductivity and solution processability. However, their oxidation susceptibility and poor dispersion in organic solvents hinder the development of highly viscous, organic-based MXene inks, necessary for making micro-supercapacitors via the high-resolution Electrohydrodynamic (EHD) jet-printing technique. Herein, we present a robust solution by developing alkylated 3,4-dihydroxy- L -phenylalanine (ADOPA) functionalized MXene (ADS-MXene), blended with carboxymethyl cellulose (CMC) in a hybrid organic solvent, to form a stable ADS-MXene (CMC) ink. This ink demonstrated high electrical conductivity (3400 S cm −1 ), optimal viscosity (∼4 ×10 ³ cP), oxidation resistance and highly stable dispersion for up to 3 months. Utilizing an EHD jet printing process especially optimized for this ink composition, we successfully fabricated ultrahigh-resolution interdigitated micro-supercapacitor electrodes with a line width and gap of 80 µm, achieving an outstanding areal cell density of 6 cells cm⁻². These electrodes experimentally exhibited superior volumetric capacitance of 2013 F cm⁻³, the highest reported to date for a MXene printed micro-supercapacitor device. This remarkable capacitance was further validated using density functional theory (DFT) calculations, which revealed pronounced charge transfer between ADOPA and MXene, contributing to said stability. Beyond record device metrics, ADS‑MXene (CMC) establishes a reproducible ink process operating window for stable EHD printing, advancing standardization efforts for MXene inks. This approach overcomes longstanding critical processing barriers and opens new avenues for high resolution, ultrahigh capacitance micro-supercapacitors, indispensable for next-generation microelectronics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Nanomaterials and Printing Technologies · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Functional inks and printing of two-dimensional materials10.1039/C8CS00084K ↗
2. Liquid exfoliation of layered materials10.1126/science.1226419 ↗
3. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution10.1146/annurev-matsci-070909-104502 ↗
4. Perspectives on solution processing of two-dimensional MXenes10.1016/j.mattod.2021.02.010 ↗
5. Inkjet-printed graphene electronics10.1021/nn2044609 ↗
6. A robust ink deposition system for binder jetting and material jetting
7. Costs and cost effectiveness of additive manufacturing
8. Additive manufacturing and sustainability: an exploratory study of the advantages and challenges10.1016/j.jclepro.2016.04.150 ↗
9. The benefits of additive manufacturing for sustainable design and production
10. High-resolution electrohydrodynamic jet printing10.1038/nmat1974 ↗
11. Micro/nanoscale electrohydrodynamic printing: From 2D to 3D10.1039/C6NR04106J ↗
12. Mechanisms, capabilities, and applications of high-resolution electrohydrodynamic jet printing10.1002/smll.201500593 ↗
13. Design principles in continuous inkjet electrohydrodynamic printing from discretized modeling and image analysis10.1016/j.jmapro.2020.03.064 ↗
14. Physics-Informed Bayesian learning of electrohydrodynamic polymer jet printing dynamics10.1038/s44172-023-00069-0 ↗
15. High-resolution electrohydrodynamic jet printing for the direct fabrication of 3D multilayer terahertz metamaterial of high refractive index10.1088/0960-1317/25/4/045006 ↗
16. Direct fabrication of VIA interconnects by electrohydrodynamic printing for multi-layer 3D flexible and stretchable electronics10.1002/admt.202100280 ↗
17. -jet printing of three-dimensional fibrous scaffold for tendon tissue engineering10.1002/jbm.b.33580 ↗
18. Sculpting Liquids with Two-Dimensional Materials: The Assembly of Ti3C2Tx MXene Sheets at Liquid–Liquid Interfaces10.1021/acsnano.9b05088 ↗
19. Nonpolar organic dispersion of 2D Ti3C2Tx MXene flakes via simultaneous interfacial chemical grafting and phase transfer method10.1021/acsnano.9b04088 ↗
20. Antioxidants unlock shelf-stable Ti3C2Tx (MXene) nanosheet dispersions10.1016/j.matt.2019.05.020 ↗
21. Universal ligands for dispersion of two-dimensional MXene in organic solvents10.1021/acsnano.2c08209 ↗
22. Colloidal nanosurfactants for 3D conformal printing of 2D van der Waals materials10.1002/adma.202003081 ↗
23. Chemical scissor–mediated structural editing of layered transition metal carbides10.1126/science.add5901 ↗
24. Layered intercalation materials10.1002/adma.202004557 ↗
25. Tuning two-dimensional nanomaterials by intercalation: materials, properties and applications10.1039/C5CS00758E ↗
26. 2D metal carbides and nitrides (MXenes) for energy storage10.1038/natrevmats.2016.98 ↗
27. The rise of MXenes
28. Electronic and optical properties of 2D transition metal carbides and nitrides (MXenes)10.1002/adma.201804779 ↗
29. MXene chemistry, electrochemistry and energy storage applications10.1038/s41570-022-00384-8 ↗
30. Stable Ti3C2Tx MXene Ink Formulation and high-resolution aerosol jet printing for high-performance MXene supercapacitors10.1002/smtd.202500499 ↗
31. Hydrous RuO2-decorated MXene coordinating with silver nanowire inks enabling fully printed micro-supercapacitors with extraordinary volumetric performance
32. Aqueous MXene/PH1000 hybrid inks for inkjet-printing micro-supercapacitors with unprecedented volumetric capacitance and modular self-powered microelectronics
33. Direct-Ink-Write 3D printing of programmable micro-supercapacitors from MXene-regulating conducting polymer inks10.1002/aenm.202203683 ↗
34. Dispersion and stabilization of alkylated 2D MXene in nonpolar solvents and their pseudocapacitive behavior
35. Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes10.1126/science.aba8311 ↗
36. Modifications of MXene layers for supercapacitors10.1016/j.nanoen.2020.104734 ↗
37. Tuning the electrochemical performance of titanium carbide MXene by controllable in situ anodic oxidation10.1002/ange.201911604 ↗
38. Scalable manufacturing of free-standing, strong Ti3C2Tx MXene films with outstanding conductivity
39. Improved synthesis of Ti3C2Tx MXenes resulting in exceptional electrical conductivity, high synthesis yield, and enhanced capacitance10.1039/D0NR06671K ↗
40. 3D printing of MXene-enhanced ferroelectric polymer for ultrastable zinc anodes10.1002/adfm.202305550 ↗
41. MXene Inks for High-Throughput Printing of Electronics10.1002/aelm.202400170 ↗
42. 3D printed template-assisted assembly of additive-free Ti3C2Tx MXene microlattices with customized structures toward high areal capacitance10.1021/acsnano.1c09622 ↗
43. Inkjet-printed MXene micro-scale devices for integrated broadband ultrafast photonics10.1038/s41699-019-0117-3 ↗
44. Flexible 2D MXenes for wearable next-generation energy storage applications10.1016/j.mser.2024.100814 ↗
45. Flexible in-plane micro-supercapacitors: progresses and challenges in fabrication and applications10.1016/j.ensm.2020.02.029 ↗
46. Oxidation stability of colloidal two-dimensional titanium carbides (MXenes)10.1021/acs.chemmater.7b00745 ↗
47. Edge capping of 2D-MXene sheets with polyanionic salts to mitigate oxidation in aqueous colloidal suspensions10.1002/ange.201906138 ↗
48. A review on MXene synthesis, stability, and photocatalytic applications10.1021/acsnano.2c04750 ↗
49. Turning trash into treasure: additive free MXene sediment inks for screen-printed micro-supercapacitors10.1002/adma.202000716 ↗
50. Engineering Aggregation-Resistant MXene Nanosheets as Highly Conductive and Stable Inks for All-Printed Electronics
51. Functionalized MXene ink enables environmentally stable printed electronics10.1038/s41467-024-47700-y ↗
52. Electrohydrodynamic jet printing: Introductory concepts and considerations10.1002/smsc.202100073 ↗
53. Ultrahigh areal number density solid-state on-chip microsupercapacitors via electrohydrodynamic jet printing10.1126/sciadv.aaz1692 ↗
54. In-situ computed tomography of particle microcracking and electrode damage in cycled NMC622/graphite pouch cell batteries10.1149/1945-7111/ac8a22 ↗
55. Properties, functions, and challenges: current collectors
56. Electromagnetic interference shielding with 2D transition metal carbides (MXenes)10.1126/science.aag2421 ↗
57. The world of two-dimensional carbides and nitrides (MXenes)10.1126/science.abf1581 ↗
58. Size-dependent physical and electrochemical properties of two-dimensional MXene flakes10.1021/acsami.8b04662 ↗
59. Carter · 2016
60. Modified MAX phase synthesis for environmentally stable and highly conductive Ti3C2 MXene10.1021/acsnano.0c08357 ↗
61. Additive-free MXene inks and direct printing of micro-supercapacitors10.1038/s41467-019-09398-1 ↗
62. 3D printing of freestanding MXene architectures for current-collector-free supercapacitors10.1002/adma.201902725 ↗
63. Scalable fabrication of MXene-based flexible micro-supercapacitor with outstanding volumetric capacitance10.1016/j.cej.2022.138456 ↗
64. Excellent oxidation resistive MXene aqueous ink for micro-supercapacitor application10.1016/j.ensm.2019.09.026 ↗
65. Capacitive energy storage in micro-scale devices: recent advances in design and fabrication of micro-supercapacitors10.1039/c3ee43526a ↗
66. Aqueous inks of pristine graphene for 3D printed microsupercapacitors with high capacitance10.1021/acsnano.1c06535 ↗
67. 3D printed Ti3C2Tx MXene/cellulose nanofiber architectures for solid-state supercapacitors: Ink rheology, 3D printability, and electrochemical performance10.1002/adfm.202109593 ↗
68. Ionic liquid pre-intercalated MXene films for ionogel-based flexible micro-supercapacitors with high volumetric energy density10.1039/C9TA02190F ↗
69. Stamping of flexible, coplanar micro-supercapacitors using MXene inks
70. Research on the printing mechanism of electrohydrodynamic satellite-free droplets in pulsed voltage10.1016/j.jmapro.2023.05.062 ↗
71. Improving oxidation stability of 2D MXenes: synthesis, storage media, and conditions10.1186/s40580-021-00259-6 ↗
72. Printing conductive nanomaterials for flexible and stretchable electronics: A review of materials, processes, and applications
73. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
74. Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗
75. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
76. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
77. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
78. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
79. Bader · 1990
80. Entire ultrathin two-dimensional pseudocapacitive nanosheets with high active covalent groups for flexible asymmetric all-solid-state micro-pseudocapacitors with high energy density and long cycle life10.1016/j.jcis.2024.10.144 ↗
81. All-pseudocapacitive two-dimensional materials with the covalent active groups and reinforcement of aramid nanofibers for lightweight, high-strength, and stable asymmetric supercapacitors10.1016/j.est.2024.115179 ↗
82. Double cross-linking system for constructing tortuosity-lowered and strength-enhanced porous MXene films with superior capacitive performance and electromagnetic shielding efficiency