Stable performance for pouch-type all-solid-state batteries enabled by current collector with optimized primer layer
Source abstract
Abstract
Sulfide-based all-solid-state batteries (ASSBs) are advancing beyond solid electrolyte development to focus on composite electrode design and scalability for commercialization. Scaling from laboratory prototypes to pilot-scale production of large cells with high-energy density and high-performance ASSBs introduces new challenges. Large-scale electrode development necessitates selection of suitable polymeric binders that are compatible with sulfide electrolytes and exhibit strong binding forces for enhanced longevity. In this regard, we used rubber- and styrene-based polymeric binders in ASSBs and introduced a primer layer on the current collector, combining carbon conductive agents and polyvinylidene fluoride, to improve adhesion to the current collector. This primer layer reduces the binder content, which is an inactive component in the electrode, thereby diversifying Li-ion and electron conduction pathways and enhancing the ionic and electronic conductivity of the composite electrode. Furthermore, the primer layer not only prevents direct contact between the sulfide-based solid electrolyte and the Cu current collector but also blocks interactions between the Cu current collector and vaporized sulfur. By acting as a passivation layer, it effectively suppresses Cu corrosion. Consequently, a pouch-type full cell incorporating a primer layer demonstrated improved initial capacity and higher Coulombic efficiency under non-pressurized conditions. Specifically, the cell retained 80.7 % of its capacity after 100 cycles, demonstrating improved performance compared to uncoated full cells (64.8 %).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
2. Energy storage deployment and innovation for the clean energy transition10.1038/nenergy.2017.125 ↗
3. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
4. Fire behavior of carbonates-based electrolytes used in Li-ion rechargeable batteries with a focus on the role of the LiPF6 and LiFSI salts10.1016/j.jpowsour.2014.07.065 ↗
5. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries10.1002/adma.201705702 ↗
6. Polymer-based solid electrolytes: material selection, design, and application10.1002/adfm.202007598 ↗
7. High-voltage superionic halide solid electrolytes for all-solid-state Li-ion batteries10.1021/acsenergylett.9b02599 ↗
8. Sulfide solid electrolytes for all-solid-state lithium batteries: Structure, conductivity, stability and application10.1016/j.ensm.2018.02.020 ↗
9. A solid future for battery development10.1038/nenergy.2016.141 ↗
10. Solid-state Li–metal batteries: challenges and horizons of oxide and sulfide solid electrolytes and their interfaces10.1002/aenm.202002689 ↗
11. Liquid-phase syntheses of sulfide electrolytes for all-solid-state lithium battery10.1038/s41570-019-0078-2 ↗
12. Boosting solid-state diffusivity and conductivity in lithium superionic argyrodites by halide substitution10.1002/anie.201814222 ↗
13. Lithium/sulfide all-solid-state batteries using sulfide electrolytes10.1002/adma.202000751 ↗
14. All-solid-state lithium batteries with sulfide electrolytes and oxide cathodes10.1007/s41918-020-00081-4 ↗
15. Rate-limiting mechanism of all-solid-state battery unravelled by low-temperature test-analysis flow
16. An argyrodite sulfide coated NCM cathode for improved interfacial contact in normal-pressure operational all-solid-state batteries10.1039/D3TA03283C ↗
17. Janek, J. r.; Hartmann, P.; Brezesinski, T. Stabilizing effect of a hybrid surface coating on a Ni-rich NCM cathode material in all-solid-state batteries10.1021/acs.chemmater.9b02947 ↗
18. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes10.1038/s41560-020-0575-z ↗
19. Toluene tolerated Li9. 88GeP1. 96Sb0. 04S11. 88Cl0. 12 solid electrolyte toward ultrathin membranes for all-solid-state lithium batteries10.1021/acs.nanolett.2c04140 ↗
20. Homogeneous Fluorine Doping toward Highly Conductive and Stable Li10GeP2S12 Solid Electrolyte for All-Solid-State Lithium Batteries10.1002/adma.202408903 ↗
21. Solid electrolyte membranes for all-solid-state rechargeable batteries10.1016/j.etran.2024.100319 ↗
22. Stable binder boosting sulfide solid electrolyte thin membrane for all-solid-state lithium batteries10.34133/energymatadv.0074 ↗
23. Selection of binder and solvent for solution-processed all-solid-state battery10.1149/2.1341709jes ↗
24. Impact of solvent treatment of the superionic argyrodite Li6PS5Cl on solid-state battery performance. Advanced Energy and Sustainability
25. Excellent compatibility of solvate ionic liquids with sulfide solid electrolytes: toward favorable ionic contacts in bulk-type all-solid-state lithium-ion batteries10.1002/aenm.201500865 ↗
26. Issues and advances in scaling up sulfide-based all-solid-state batteries10.1021/acs.accounts.1c00333 ↗
27. Toward practical all-solid-state lithium-ion batteries with high energy density and safety: comparative study for electrodes fabricated by dry-and slurry-mixing processes10.1016/j.jpowsour.2017.11.031 ↗
28. Binder-free sheet-type all-solid-state batteries with enhanced rate capabilities and high energy densities10.1038/s41598-018-19398-8 ↗
29. Porosity characterisation of solid-state battery electrolyte with terahertz time-domain spectroscopy10.1016/j.jpowsour.2024.234050 ↗
30. Characterization of electronic and ionic transport in Li1-xNi0. 33Mn0. 33Co0. 33O2 (NMC333) and Li1-xNi0. 50Mn0. 20Co0. 30O2 (NMC523) as a function of Li content10.1149/2.0131608jes ↗
31. Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powder10.1016/j.powtec.2012.01.024 ↗
32. Mesoscale analysis of conductive binder domain morphology in lithium-ion battery electrodes10.1149/2.0981813jes ↗
33. Electrical resistivity of aluminum and manganese10.1063/1.555725 ↗
34. Electrical resistivity of copper, gold, palladium, and silver10.1063/1.555614 ↗
35. A new perspective on the advanced microblade cutting method for reliable adhesion measurement of composite electrodes10.33961/jecst.2021.00976 ↗
36. Crater-like architectural aluminum current collectors with superior electrochemical performance for Li-ion batteries
37. Three-dimensional adhesion map based on surface and interfacial cutting analysis system for predicting adhesion properties of composite electrodes10.1021/acsami.6b06344 ↗
38. Measurement and analysis of adhesion property of lithium-ion battery electrodes with SAICAS10.1021/am404580f ↗
39. High-voltage all-solid-state lithium battery with sulfide-based electrolyte: challenges for the construction of a bipolar multicell stack and how to overcome them10.1021/acsaem.0c00041 ↗
40. The corrosion of copper by atmospheric sulphurous gases10.1016/0010-938X(83)90043-4 ↗
41. Understanding the stability of copper current collector with sulfide electrolyte in all-solid-state batteries10.1002/aenm.202303156 ↗
42. Degradation of high-nickel-layered oxide cathodes from surface to bulk: a comprehensive structural, chemical, and electrical analysis10.1002/aenm.202001035 ↗
43. Measurement of anisotropic volumetric resistivity in lithium ion electrodes10.1039/D3RA06412C ↗
44. Single-or poly-crystalline Ni-rich layered cathode, sulfide or halide solid electrolyte: which will be the winners for all-solid-state batteries?10.1002/aenm.202100126 ↗
45. Beyond doping and coating: prospective strategies for stable high-capacity layered Ni-rich cathodes10.1021/acsenergylett.0c00191 ↗
46. Solution-processable glass LiI-Li4SnS4 superionic conductors for all-solid-state Li-ion batteries
47. Electronic and ionic conductivities of LiNi1/3Mn1/3Co1/3O2-Li3PS4 positive composite electrodes for all-solid-state lithium batteries10.1149/2.1501714jes ↗
48. Three-dimensional networking binders prepared in situ during wet-slurry process for all-solid-state batteries operating under low external pressure10.1016/j.ensm.2022.04.017 ↗
49. High-speed nanoindentation mapping: a review of recent advances and applications10.1016/j.cossms.2023.101107 ↗
50. Some issues on nanoindentation method to measure the elastic modulus of particles in composites10.1016/j.compositesb.2011.05.002 ↗
51. All-solid-state batteries with slurry coated LiNi0. 8Co0. 1Mn0. 1O2 composite cathode and Li6PS5Cl electrolyte: effect of binder content10.1016/j.jpowsour.2018.04.069 ↗
52. Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach10.1016/j.ensm.2019.05.033 ↗
53. Effect of the binder content on the electrochemical performance of composite cathode using Li 6 PS 5 Cl precursor solution in an all-solid-state lithium battery10.1007/s11581-017-2106-x ↗
54. Interweaving 3D network binder for high-areal-capacity Si anode through combined hard and soft polymers10.1002/aenm.201802645 ↗
55. Elastic rubber-containing multifunctional binder for advanced Li-S batteries10.1016/j.cej.2020.126628 ↗
56. A review of current collectors for lithium-ion batteries10.1016/j.jpowsour.2020.229321 ↗
57. SEI growth on Lithium metal anodes in solid-state batteries quantified with coulometric titration time analysis10.1038/s41467-023-42512-y ↗
58. Structural characterization of polycrystalline thin films by X-ray diffraction techniques
59. Höltschi, L. Understanding Degradation Mechanisms of Sulfide-Based All-Solid-State Lithium-Ion Batteries at Multiple Length Scales. ETH Zurich, 2021.
60. Elucidating reversible electrochemical redox of Li6PS5Cl solid electrolyte10.1021/acsenergylett.9b01693 ↗
61. Enabling Uniform and Accurate Control of Cycling Pressure for All-Solid-State Batteries10.1002/aenm.202304327 ↗
62. Long cycle life all-solid-state batteries enabled by solvent-free approach for sulfide solid electrolyte and cathode films
63. In situ formed LiI interfacial layer for all-solid-state lithium batteries with Li6PS5Cl solid electrolyte membranes10.1021/acsami.2c18975 ↗
64. A rocking chair type all-solid-state lithium ion battery adopting Li2O–ZrO2 coated LiNi0. 8Co0. 15Al0. 05O2 and a sulfide based electrolyte10.1016/j.jpowsour.2013.10.005 ↗
65. Low pressure cycling of solid state Li-ion pouch cells based on NMC–Sulfide–Nanosilicon chemistry10.1016/j.jpowsour.2023.233646 ↗
66. Super long-cycling all-solid-state battery with thin Li6PS5Cl-based electrolyte10.1002/aenm.202200660 ↗
67. Wet-slurry fabrication using PVdF-HFP binder with sulfide electrolytes via synergetic cosolvent approach for all-solid-state batteries10.1016/j.cej.2022.138047 ↗