journal article·2024-09Open access

Mechanical properties of AlCoCrCuFeNi high-entropy alloys using molecular dynamics and machine learning

Hoang-Giang Nguyen, Thanh-Dung Le, Hong-Giang Nguyen, Te-Hua Fang

Abstract

High-entropy alloys (HEAs) stand out from multi-component alloys due to their attractive microstructures and mechanical properties. In this investigation, molecular dynamics (MD) simulation and machine learning (ML) were used to ascertain the deformation mechanism of AlCoCrCuFeNi HEAs under the influence of temperature, strain rate, and grain sizes. First, the MD simulation shows that the yield stress decreases significantly as the strain and temperature increase. In other cases, changes in strain rate and grain size have less effect on mechanical properties than changes in strain and temperature. The alloys exhibited superplastic behavior under all test conditions. The deformity mechanism discloses that strain and temperature are the main sources of beginning strain, and the shear bands move along the uniaxial tensile axis inside the workpiece. Furthermore, the fast phase shift of inclusion under mild strain indicates the relative instability of the inclusion phase of hexagonal close-packed (HCP). Ultimately, the dislocation evolution mechanism shows that the dislocations are transported to free surfaces under increased strain when they nucleate around the grain boundary. Surprisingly, the ML prediction results also confirm the same characteristics as those confirmed from the MD simulation. Hence, the combination of MD and ML reinforces the confidence in the findings of mechanical characteristics of HEA. Consequently, this combination fills the gaps between MD and ML, which can significantly save time, human power, and cost to conduct real experiments for testing HEA deformation in practice.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Simulation and understanding of atomic and molecular quantum crystals10.1103/RevModPhys.89.035003 ↗
2. Molecular dynamics
3. Getting the right answers for the right reasons: Toward predictive molecular simulations of water with many-body potential energy functions10.1021/acs.accounts.6b00285 ↗
4. Direct numerical simulation of particle–fluid interactions: a review10.1007/s40997-016-0035-3 ↗
5. Understanding the performance of flow-electrodes for capacitive deionization through hydrodynamic voltammetry10.1016/j.cej.2020.126826 ↗
6. An atomistic modeling survey of the shear strength of twist grain boundaries in aluminum10.1016/j.scriptamat.2015.01.022 ↗
7. Dislocation dynamics in aluminum containing θ’phase: Atomistic simulation and continuum modeling10.1016/j.ijplas.2019.02.010 ↗
8. Dislocation interactions with grain boundaries10.1016/j.cossms.2014.05.004 ↗
9. Molecular dynamics simulations of the melting of Al–Ni nanowires10.1080/14786435.2016.1198053 ↗
10. Molecular dynamic simulation of edge dislocation-void interaction in pure Al and Al-Mg alloy10.1016/j.msea.2016.07.121 ↗
11. Study on copper-to-copper bonding of three-dimensional integrated circuits using the quasicontinuum method10.1088/1402-4896/ad46cd ↗
12. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
13. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
14. Cyclic plasticity and deformation mechanism of AlCrCuFeNi high entropy alloy10.1016/j.jallcom.2023.168838 ↗
15. Determination of atomic-scale structure and compressive behavior of solidified AlxCrCoFeCuNi high entropy alloys10.1016/j.ijmecsci.2019.105389 ↗
16. Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro-and nanoindentation methods10.1016/j.actamat.2016.11.046 ↗
17. Machining mechanism and residual stress of AlCuCrFeNi alloy10.1016/j.ijmecsci.2024.109429 ↗
18. Unexpected cyclic stress-strain response of dual-phase high-entropy alloys induced by partial reversibility of deformation10.1016/j.scriptamat.2017.09.013 ↗
19. Fine-scale precipitation in the high-entropy alloy Al0. 5CrFeCoNiCu
20. Tensile properties of AlCrCoFeCuNi glassy alloys: A molecular dynamics simulation study10.1016/j.msea.2017.05.057 ↗
21. Molecular dynamics simulation and machine learning-based analysis for predicting tensile properties of high-entropy FeNiCrCoCu alloys10.1016/j.jmrt.2023.07.023 ↗
22. Microstructures and properties of equimolar AlCoCrCuFeNi high-entropy alloy additively manufactured by selective laser melting10.1016/j.intermet.2020.106746 ↗
23. Effect of high magnetic field assisted heat treatment on microstructure and properties of AlCoCrCuFeNi high-entropy alloy10.1016/j.matlet.2021.130540 ↗
24. A hexagonal close-packed high-entropy alloy: The effect of entropy10.1016/j.matdes.2016.01.149 ↗
25. Molecular dynamics simulation of Al–Co–Cr–Cu–Fe–Ni high entropy alloy thin film growth10.1016/j.intermet.2015.09.008 ↗
26. Scratching of nanocrystalline metals: A molecular dynamics study of Fe10.1016/j.apsusc.2016.07.139 ↗
27. Effect of annealing on mechanical and thermoelectric properties of a Al2CoCrFeNi high-entropy alloy10.1016/j.matdes.2021.110313 ↗
28. Tensile and compressive mechanical behavior of a CoCrCuFeNiAl 0.5 high entropy alloy10.1142/S0217979209060774 ↗
29. Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys10.1016/j.jmst.2017.07.013 ↗
30. Nanoscale phase separation in a fcc-based CoCrCuFeNiAl0. 5 high-entropy alloy10.1016/j.actamat.2014.10.033 ↗
31. Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism10.1016/j.jallcom.2019.07.106 ↗
32. Mechanics of AlCuNiTi alloy orthogonal micro-cutting10.1088/1361-651X/ad064f ↗
33. On the hot-worked microstructure of a face-centered cubic Al0. 3CoCrFeNi high entropy alloy10.1016/j.scriptamat.2019.11.022 ↗
34. Deformation behaviors of Cu29Zr32Ti15Al5Ni19 high entropy bulk metallic glass during nanoindentation10.1016/j.apsusc.2018.02.245 ↗
35. Unraveling the deformation behavior of the Fe45Co25Ni10V20 high entropy alloy10.1016/j.ijplas.2023.103619 ↗
36. Tuning mechanical properties of high entropy alloys by electro-pulsing method10.1016/j.jallcom.2022.163684 ↗
37. Plasticity Improvement in a Co-Rich Co40Fe25Cr20Ni15 High-Entropy Alloy via Al Alloying10.3390/ma16031149 ↗
38. On the path to optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti high entropy alloy family for high temperature applications10.3390/e18040104 ↗
39. Research on fatigue crack growth behavior of commercial pure titanium base metal and weldment at different temperatures10.1016/j.tafmec.2019.01.017 ↗
40. Evaluation of the brittle failure of blunt U-shaped notch under mode I loading10.1016/j.engfracmech.2019.04.022 ↗
41. Tool microstructure impact on the wear behavior of ferrite iron during nanoscratching: An atomic level simulation10.1016/j.wear.2016.11.008 ↗
42. Investigations of the mechanical properties of nanoimprinted amorphous Ni–Zr alloys utilizing the molecular dynamics simulation10.1016/j.jallcom.2015.11.068 ↗
43. Combining machine learning and computational chemistry for predictive insights into chemical systems10.1021/acs.chemrev.1c00107 ↗
44. Dislocation nucleation in Al single crystal at shear parallel to (111) plane: Molecular dynamics simulations and nucleation theory with artificial neural networks10.1016/j.ijplas.2021.102953 ↗
45. Zhang · 2023
46. Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2016.01.033 ↗
47. Plastic deformation in nanoindentation of Alx (CuCrFeNi) 1− x high entropy alloy10.1016/j.jallcom.2023.172172 ↗
48. Crystallization kinetics in AlxCrCoFeNi (0≤ x≤ 40) high-entropy alloys10.1016/j.scriptamat.2017.07.024 ↗
49. Complete set of stochastic Verlet-type thermostats for correct Langevin simulations10.1080/00268976.2019.1662506 ↗
50. Defining velocities for accurate kinetic statistics in the Grønbech-Jensen Farago thermostat10.1103/PhysRevE.101.022123 ↗
51. Reactive molecular dynamics study of the thermal decomposition of phenolic resins10.3390/jcs3020032 ↗
52. Nonergodicity of the Nose-Hoover chain thermostat in computationally achievable time10.1103/PhysRevE.90.043304 ↗
53. The embedded-atom method: a review of theory and applications10.1016/0920-2307(93)90001-U ↗
54. Grain boundary structure and mobility in high-entropy alloys: A comparative molecular dynamics study on a Σ11 symmetrical tilt grain boundary in face-centered cubic CuNiCoFe10.1016/j.actamat.2019.12.031 ↗
55. Influences of grain size and temperature on tribological characteristics of CuAlNi alloys under nanoindentation and nanoscratch10.1016/j.ijmecsci.2020.105865 ↗
56. Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers10.1103/PhysRevB.69.144113 ↗
57. Computational study of the generation of crystal defects in a bcc metal target irradiated by short laser pulses10.1103/PhysRevB.77.214108 ↗
58. Mechanical behaviors of AlCrFeCuNi high-entropy alloys under uniaxial tension via molecular dynamics simulation10.1039/C6RA16503F ↗
59. Atomic-scale analysis of nanoindentation behavior of high-entropy alloy10.1142/S2424913016500016 ↗
60. Competing roles of interfaces and matrix grain size in the deformation and failure of polycrystalline Cu–graphene nanolayered composites under shear loading10.1039/C8CP04481C ↗
61. Softening of nanocrystalline metals at very small grain sizes10.1038/35328 ↗
62. Average grain size in polycrystalline ceramics10.1111/j.1151-2916.1969.tb11975.x ↗
63. Structural and mechanical characterization of sputtered CuxNi100-x thin film using molecular dynamics10.1016/j.jpcs.2020.109663 ↗
64. Molecular dynamics study of melting and freezing of small Lennard-Jones clusters10.1021/j100303a014 ↗
65. Atomistic simulation of deformation behaviors polycrystalline CoCrFeMnNi high-entropy alloy under uniaxial loading10.1016/j.ijrmhm.2020.105415 ↗
66. Investigation into nanoscratching mechanical response of AlCrCuFeNi high-entropy alloys using atomic simulations10.1016/j.apsusc.2017.04.009 ↗
67. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
68. Critical temperature prediction for a superconductor: A variational bayesian neural network approach10.1109/TASC.2020.2971456 ↗
69. Machine learning for nanoplasmonics10.1038/s41565-022-01284-0 ↗
70. Montgomery · 2021
71. Support vector machines for classification and regression
72. Greedy function approximation: a gradient boosting machine
73. Deep learning10.1038/nature14539 ↗
74. Albawi, S., Mohammed, T.A., & Al-Zawi, S. (2017, August). Understanding of a convolutional neural network. In 2017 International Conference on Engineering and Technology (ICET) (pp. 1-6). Ieee.10.1109/ICEngTechnol.2017.8308186 ↗
75. A survey of convolutional neural networks: analysis, applications, and prospects
76. Long short-term memory10.1162/neco.1997.9.8.1735 ↗
77. A review of recurrent neural networks: LSTM cells and network architectures10.1162/neco_a_01199 ↗
78. Effects of microstructure and temperature on the mechanical properties of nanocrystalline CoCrFeMnNi high entropy alloy under nanoscratching using molecular dynamics simulation10.1016/j.jallcom.2021.159516 ↗
79. Lattice-distortion dependent yield strength in high entropy alloys10.1016/j.msea.2020.139323 ↗
80. Cyclic plasticity of CoCrFeMnNi high-entropy alloy (HEA): A molecular dynamics simulation10.1142/S175882512150006X ↗
81. Dislocation dynamics in Al0. 1CoCrFeNi high-entropy alloy under tensile loading10.1016/j.intermet.2017.08.004 ↗
82. Temperature gradient enhances the solidification process and properties of a CoCrFeNi high-entropy alloy: Atomic insights from molecular dynamics simulations10.1016/j.commatsci.2023.112538 ↗
83. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7. 5Cu17. 5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗
84. Probing the phase transformation and dislocation evolution in dual-phase high-entropy alloys10.1016/j.ijplas.2018.10.014 ↗