journal article·2006-01

Recent advances of conductive adhesives as a lead-free alternative in electronic packaging: Materials, processing, reliability and applications

Yi Li, C.P. Wong

Publisher page

Abstract

Abstract Tin–lead solder alloys are widely used in the electronic industry. They serve as interconnects that provide the conductive path required to achieve connection from one circuit element to another. There are increasing concerns with the use of tin–lead alloy solders in recognition of hazards of using lead. Lead-free solders and electrically conductive adhesives (ECAs) have been considered as the most promising alternatives of tin-lead solder. ECAs consist of a polymeric resin (such as, an epoxy, a silicone, or a polyimide) that provides physical and mechanical properties such as adhesion, mechanical strength, impact strength, and a metal filler (such as, silver, gold, nickel or copper) that conducts electricity. ECAs offer numerous advantages over conventional solder technology, such as environmental friendliness, mild processing conditions (enabling the use of heat-sensitive and low-cost components and substrates), fewer processing steps (reducing processing cost), low stress on the substrates, and fine pitch interconnect capability (enabling the miniaturization of electronic devices). Therefore, conductive adhesives have been used in liquid crystal display (LCD) and smart card applications as an interconnect material and in flip–chip assembly, chip scale package (CSP) and ball grid array (BGA) applications in replacement of solder. However, no currently commercialized ECAs can replace tin–lead metal solders in all applications due to some challenging issues such as lower electrical conductivity, conductivity fatigue (decreased conductivity at elevated temperature and humidity aging or normal use condition) in reliability testing, limited current-carrying capability, and poor impact strength. Considerable research has been conducted recently to study and optimize the performance of ECAs, such as electrical, mechanical and thermal behaviors improvement as well as reliability enhancement under various conditions. This review article will discuss the materials, applications and recent advances of electrically conductive adhesives as an environmental friendly solder replacement in the electronic packaging industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Vianco · 2004 · 167
2. Abet · Mater. Sci. Eng. · 2000 · 27 · 9510.1016/S0927-796X(00)00010-3 ↗
3. 2001
4. RoHS Regulations (UK) Government Guidance Notes, August 2005.
5. Green IC packaging
6. Wu · Mater. Sci. Eng. R. · 2004 · 44 · 110.1016/j.mser.2004.01.001 ↗
7. Li · Science · 2005 · 308 · 141910.1126/science.1110168 ↗
8. 2001 · 4
9. Lau · 2002
10. Li · 2004 · 1
11. Miric · Soldering Surf. Mount Technol. · 1998 · 10 · 1910.1108/09540919810203793 ↗
12. Andersson · Mater. Sci. Eng. A: Struct. Mater.: Propert. Microstruct. Process. A · 2005 · 394 · 2010.1016/j.msea.2004.10.043 ↗
13. 2004 · 211
14. Chen · 2002 · 49
15. Zeng · Mater. Sci. Eng. R. · 2002 · 38 · 5510.1016/S0927-796X(02)00007-4 ↗
16. Laurila · Mater. Sci. Eng. R. · 2005 · 49 · 110.1016/j.mser.2005.03.001 ↗
17. Lau · Adv. Packag. · 2004 · 13 · 27
18. Lau · Adv. Packag. · 2004 · 13 · 25
19. Tu · J. Appl. Phys. · 2003 · 93 · 133510.1063/1.1517165 ↗
20. Abtew · Mater. Sci. Eng. R. · 2000 · 27 · 9510.1016/S0927-796X(00)00010-3 ↗
21. 1999
22. Murray · Mater. Res. Bull. · 2003 · 28 · 44910.1557/mrs2003.127 ↗
23. Wood · J. Electron. Mater. · 1994 · 23 · 70910.1007/BF02651363 ↗
24. Environmental Protection Agency, National Air Quality and Emission Trend Report, 1989, PA-450/4-91-003, Research Triangle Park, NC, 1991.
25. Liu · Mater. Technol. · 1995 · 10 · 24710.1080/10667857.1995.11752642 ↗
26. Kristiansen · IEEE Trans. Components Packag. Manuf. Technol. Part A · 1998 · 21 · 20810.1109/95.705466 ↗
27. Gilleo · 2001
28. Pajonk · 2004 · 165
29. Ferrando · 2000 · 205
30. Ito · 1998 · 1047
31. Caers · 2003 · 1176
32. Pendse · 2002 · 100
33. Yu · J. Mater. Res. · 2005 · 20 · 132410.1557/JMR.2005.0159 ↗
34. Nguyen · 1993 · 479
35. Gaynes · IEEE Trans. Components Packag. Manuf. Technol. Part B · 1995 · 18 · 29910.1109/96.386265 ↗
36. Li · 1995 · 114
37. Lutz · Hybrid Circuits · 1990 · 23 · 27
38. Pujol · J. Adhesion · 1989 · 27 · 21310.1080/00218468908048454 ↗
39. Krishnamurthy · 1992 · 719
40. Ivan · 1997 · 525
41. Lin · 1996 · 1059
42. Rosner · 1996 · 578
43. Liu · 1998 · 1
44. Lu · IEEE Trans. Components Packag. Manuf. Technol. Part C · 1999 · 22 · 223
45. Smith-Vargo · Electron. Packag. Prod. · 1986 · 48
46. Jost · 1987 · 548
47. Pandiri · Adhesives Age · 1987 · 31
48. Lu · IEEE Trans. Components Packag. Manuf. Technol. Part A · 1999 · 22 · 36510.1109/6144.796536 ↗
49. Li · 2004 · 1959
50. Y. Li, K. Moon, C.P. Wong, IEEE Transactions on Components and Packaging Technologies, in press.
51. Li · 2005 · 1648
52. Gallagher · 1997 · 554
53. Roman · 1992 · 52
54. Jiang · J. Electron. Mater. · 2005 · 34 · 143210.1007/s11664-005-0202-6 ↗
55. Zwolinski · 1996 · 333
56. Lu · IEEE Trans. Components Packag. Manuf. Technol. Part C · 1999 · 22 · 228
57. Persson · 1997
58. Antoon · J. Polym. Sci. (Phys.) · 1981 · 19 · 156710.1002/pol.1981.180191007 ↗
59. Antoon · J. Polym. Sci. (Phys.) · 1981 · 19 · 19710.1002/pol.1981.180190202 ↗
60. Lu · J. Appl. Polym. Sci. · 1999 · 74 · 39910.1002/(SICI)1097-4628(19991010)74:2<399::AID-APP22>3.0.CO;2-F ↗
61. Reardon · 1986
62. Noack · 1989
63. Reardon · 1987
64. Romaine · 1986 · 1066
65. Li · J. Adhesion Sci. Technol. · 2005 · 19 · 142710.1163/156856105774805822 ↗
66. Y. Li, K. Moon, C.P. Wong, US Patent Pending, Application Date October 2005.
67. C. Cheng, G. Fredrickson, Y. Xiao, Q.K. Tong, D. Lu, US Patent 6,344,157 (2002).
68. Trabanelli · 1970 · vol. 1 · 147
69. Trabanelli · 1987 · 119
70. Riggs · 1973 · 2
71. Matienzo · J. Mater. Sci. · 2003 · 38 · 483110.1023/B:JMSC.0000004402.84716.ea ↗
72. Li · J. Electron. Mater. · 2004 · 33 · 10610.1007/s11664-004-0278-4 ↗
73. Takezawa · 2002 · 39
74. Moon · J. Electron. Mater. · 2004 · 33 · 138110.1007/s11664-004-0168-9 ↗
75. D. Durand, D. Vieau, A.L. Chu, T.S. Weiu, US Patent 5,180,523 (November 1989).
76. G. Davies, J. Sandstrom, Circuits Mfg., 1976, pp. 56–62.
77. Harsanyi · Electrocomp. Sci. Technol. · 1985 · 11 · 28110.1155/APEC.11.281 ↗
78. Giacomo · 1992 · 255
79. Manepalli · IEEE Trans. Adv. Packag. · 1999 · 22 · 410.1109/6040.746536 ↗
80. Giacomo · 1997
81. Wassink · Hybrid Circ. · 1987 · 9
82. Shirai · 2001 · 79
83. A. Der Marderosian, Ratheon Co. Equipment Division, Equipment Development Laboratories, 1978, pp. 134–141.
84. H. Schonhorn, L.H. Sharpe, Prevention of surface mass migration by a polymeric surface coating. US Patent 4,377,619 (1983).
85. Brusic · J. Electrochem. Soc. · 1995 · 142 · 259110.1149/1.2050058 ↗
86. P.-I. Wang, T.-M. Lu, S.P. Murarka, R. Ghoshal, US Patent 0,236,711 (2005).
87. Y. Li, C.P. Wong, US Patent Pending, GTRC Invention No. 3642 (2005).
88. Gent · 1985 · vol. 1
89. Morris · 2000 · 41
90. Liong · IEEE Trans. Components Packag. Technol. · 2005 · 28 · 32710.1109/TCAPT.2005.848484 ↗
91. Plueddemann · 1991
92. CRC · 1984
93. Matienzo · J. Adhesion Sci. Technol. · 1989 · 5 · 35710.1163/156856189X00263 ↗
94. S.R. Culler, US Patent 5,393,362 (1995).
95. R.A. Cayless, US Patent 5,437,937 (1995).
96. Matienzo · J. Mater. Sci. · 2003 · 38 · 483110.1023/B:JMSC.0000004402.84716.ea ↗
97. H.W. Eichner, W.E. Schowalter, Report No. 1813, Forest Products Laboratory, Madison, WI, 1950.
98. J.A. Marceau, R.H. Firminhac, Y. Moji, US Patent 4,085,012 (1979).
99. Moon · J. Adhesion Sci. Technol. · 2004 · 18 · 15310.1163/156856104772759377 ↗
100. Zhang · 2002 · 1569