journal article·2002-06

Six cases of reliability study of Pb-free solder joints in electronic packaging technology

K. Zeng, K.N. Tu

Publisher page

Abstract

Abstract Solder is widely used to connect chips to their packaging substrates in flip chip technology as well as in surface mount technology. At present, the electronic packaging industry is actively searching for Pb-free solders due to environmental concern of Pb-based solders. Concerning the reliability of Pb-free solders, some electronic companies are reluctant to adopt them into their high-end products. Hence, a review of the reliability behavior of Pb-free solders is timely. We use the format of “case study” to review six reliability problems of Pb-free solders in electronic packaging technology. We conducted analysis of these cases on the basis of thermodynamic driving force, time-dependent kinetic processes, and morphology and microstructure changes. We made a direct comparison to the similar problem in SnPb solder whenever it is available. Specifically, we reviewed: (1) interfacial reactions between Pb-free solder and thick metalliztion of bond-pad on the substrate-side, (2) interfacial reactions between Pb-free solder and thin-film under-bump metallization on the chip-side, (3) the growth of a layered intermetallic compound (IMC) by ripening in solid state aging of solder joints, (4) a long range interaction between chip-side and substrate-side metallizations across a solder joint, (5) electromigration in flip chip solder joints, and finally (6) Sn whisker growth on Pb-free finish on Cu leadframe. Perhaps, these cases may serve as helpful references to the understanding of other reliability behaviors of Pb-free solders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. J. Cannis, Green IC packaging, Adv. Packag. (8) (2001) 33–38.
2. Website: lead-free.org/legislation.
3. Website: www.nemi.org/PbFreePUBLIC.
4. Morphology of instability of the wetting tips of eutectic SnBi, eutectic SnPb, and pure Sn on Cu10.1557/JMR.1995.0497 ↗
5. Morphological stability of solder reaction products in flip chip technology10.1007/s11664-001-0139-3 ↗
6. Stability of channels at a scalloplike Cu6Sn5 layer in solder interconnections10.1557/JMR.2001.0169 ↗
7. Tin–lead (Sn–Pb) solder reaction in flip chip technology10.1016/S0927-796X(01)00029-8 ↗
8. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
9. M. Hansen, K. Anderko, Constitution of Binary Alloys, 2nd Edition, Genium Publishing Co., New York, 1958.10.1149/1.2428700 ↗
10. Direct observation of twinning in tin lamellae10.1016/0001-6160(70)90019-2 ↗
11. Z. Mei, M. Kaufmann, A. Eslambolchi, P. Johnson, Brittle interfacial fracture of PBGA packages soldered on electroless nickel/immersion gold, in: Proceedings of the 48th Electronic Components and Technology Conference, Seattle, Washington, USA, Piscataway, USA, IEEE, 25–28 May 1998, pp. 952–961.
12. T.Y. Lee, W.J. Choi, K.N. Tu, J.W. Jang, S.M. Kuo, J.K. Lin, D.R. Frear, K. Zeng, J.K. Kivilahti, Morphology, kinetics, and thermodynamics of solid state aging of eutectic SnPb- and Pb-free solders (Sn3.5Ag, Sn3.8Ag0.7Cu, and Sn0.7Cu) on Cu, J. Mater. Res. 17 (2) (2001).10.1557/JMR.2002.0042 ↗
13. Irreversible processes of spontaneous whisker growth in bimetallic Cu–Sn thin-film reactions10.1103/PhysRevB.49.2030 ↗
14. Tin pest in lead-free solders10.1108/09540910110361730 ↗
15. Thermodynamics of the Sn–In–Ag solder system10.1007/s11664-998-0205-1 ↗
16. Metallurgy of low temperature lead-free solders for electronic assembly10.1179/imr.1995.40.2.65 ↗
17. F. Hua, J. Glazer, Lead-free solders for electronic assembly, in: Proceedings of the Design and Reliability of Solders and Solder Interconnections, Orlando, FL, USA, TMS/AIME, Warrendale, USA, 10–13 February 1997, pp. 65–73.
18. J.S. Hwang, Overview of lead-free solders for electronics and microelectronics, in: Proceedings of the Surface Mount International Conference and Exposition, San Jose, CA, USA, Surface Mount International, Edina, MN, USA, 28 August–4 September 1994, pp. 405–421.
19. Advances in lead-free electronics soldering10.1016/S1359-0286(00)00036-X ↗
20. Lead-free solders for electronic assembly
21. I. Anderson, Sn–Ag–Cu: a lead-free solder for board applications, in: Proceedings of the NEPCON West’96, Anaheim, CA, USA, Reed Exhibition, Norwalk, CT, USA, Vol. 2, 27–29 February 1996, pp. 882–887.
22. A viable SnPb solder substitute: Sn–Ag–Cu10.1007/BF02653344 ↗
23. Mechanical fatigue characteristics of Sn–3.5Ag–X (X = Bi, Cu, Zn and In) solder alloys10.1007/s11664-998-0074-7 ↗
24. The mechanical behavior of interconnect materials for electronic packaging10.1007/BF03222944 ↗
25. W. Peng, Lead-free electronic assembly based on Sn–Ag–Cu solders, Thesis, Helsinki University of Technology, Helsinki, Finland, 2001.
26. Tin–silver–copper eutectic temperature and composition10.1007/s11661-000-0111-5 ↗
27. Experimental and thermodynamic assessment of Sn–Ag–Cu solder alloys10.1007/s11664-000-0003-x ↗
28. Solder reaction-assisted crystallization of electroless Ni–P under-bump-metallization in low cost flip chip technology10.1063/1.370627 ↗
29. Y.-D. Jeon, K.-W. Paik, K.-S. Bok, W.-S. Choi, C.-L. Cho, Studies on Ni–Sn Intermetallic compound and P-rich Ni layer at the electroless nickel UBM—solder interface and their effects on flip chip solder joint reliability, in: Proceedings of the 51th Electronic Components & Technology Conference, Orlando, FL, Piscataway, USA, IEEE, 29 May–31 June 2001, pp. 1326–1332.
30. The reactions between electroless Ni–Cu–P deposit and 63Sn–37Pb flip chip solder bumps during reflow10.1007/s11664-000-0165-6 ↗
31. Correlation between Ni3Sn4 intermetallics and Ni3P due to solder reaction-assisted crystallization of electroless Ni–P metallization in advanced packages10.1557/JMR.2000.0363 ↗
32. Study of Ni3P growth due to solder reaction-assisted crystallization of electroless Ni–P metallization10.1023/A:1006735103744 ↗
33. Thermal stability of electroless-Ni/solder interfaces. Part A. Interfacial chemistry and microstructure10.1007/BF02830353 ↗
34. K. Zeng, V. Vuorinen, J.K. Kivilahti, Intermetallic reactions between lead-free SnAgCu solder and Ni(P)/Au surface finish on PWBs, in: Proceedings of the 51th Electronic Components & Technology Conference, Orlando, FL, Piscataway, USA, IEEE, 29 May–31 June 2001, pp. 685–690.10.1109/ECTC.2001.927808 ↗
35. K. Zeng, V. Vuorinen, J.K. Kivilahti, Interfacial reactions between lead-free SnAgCu solder and Ni(P) surface finish on PWBs, IEEE Trans. Electr. Packag. Manuf., 2002 (in press).
36. V. Vuorinen, K. Zeng, J.K. Kivilahti, A TEM study of interfacial reaction in SnAgCu solder joints on the Ni(P) coated PCBs, 2002 (submitted for publication).
37. Interfacial reaction and wetting behavior in eutectic SnPb solder on Ni/Ti thin films and Ni foils10.1063/1.371751 ↗
38. R.J.K. Wassink, Soldering in Electronics, 2nd Edition, Electrochemical Publications Limited, Isle of Man, British Isles, 1989.
39. D. Frear, F. Hosking, P. Vianco, Mechanical behavior of solder joint interfacial intermetallics, in: Proceedings of the Materials Developments in Microelectronic Packaging: Performance and Reliability, Montreal, Que., Canada, ASM International, Materials Park, Ohio, USA, 19–22 August 1991, pp. 229–240.
40. M. Li, F. Zhang, W.T. Chen, K. Zeng, K.N. Tu, H. Balkan, P. Elenius, Interfacial microstructure evolution between eutectic SnAgCu solder and Al/Ni(V)/Cu thin films, J. Mater. Res., 2001 (submitted for publication).10.1557/JMR.2002.0239 ↗
41. Use of multi-component phase diagrams for predicting phase evolution in solder/conductor systems10.1007/s11664-001-0212-y ↗
42. F.J.J. van Loo, J.A. van Beek, G.F. Bastin, R. Metselaar, The role of thermodynamics and kinetics in multiphase ternary diffusion, in: Proceedings of the Symposium on Diffusion in Solids: Recent Developments, Ditroit, MI, The Metallurgical Society, Warrendale, USA, 17 September 1985, pp. 231–259.
43. The local nomial composition—useful concept for microjoining and interconnection applications10.1016/S1359-6462(97)00290-X ↗
44. J. Kivilahti, IPMA—The thermodynamic databank for interconnection and packaging materials, Internal Report, Helsinki University of Technology, 2000.
45. A. Jansson, Thermodynamic assessment of the Cu–Fe–Ni system, TRITA-MAC 340, Royal Institute of Technology, 1987.
46. Thermodynamic modeling of the Ni–Pb–Sn system10.1007/s11661-999-0085-x ↗
47. Thermodynamic assessment of the Cu–Sn system
48. W.T. Chen, C.E. Ho, C.R. Kao, Effect of Cu concentration on the interfacial reactions between Ni and Sn–Cu solders, J. Mater. Res. 17 (2) (2002).10.1557/JMR.2002.0036 ↗
49. Electron microscopy study of interfacial reaction between eutectic SnPb and Cu/Ni(V)/Al thin-film metallization10.1063/1.371967 ↗
50. Ripening-assisted asymmetric spalling of Cu–Sn compound spheroids in solder joints on Si wafers10.1063/1.116013 ↗
51. Spalling of Cu6Sn5 spheroids in the soldering reaction of eutectic SnPb on Cr/Cu/Au thin films10.1063/1.363728 ↗
52. Dewetting of molten Sn on Au/Cu/Cr thin-film metallization10.1063/1.117855 ↗
53. Thermodynamic study of phase equilibria in the Pb–Sn–Sb system10.1007/BF02645349 ↗
54. A thermodynamic study on the Ag–Sb–Sn system10.1016/0925-8388(95)02191-4 ↗
55. A thermodynamic optimisation of the Cu–Ag–Pb system
56. A. Bolcavage, C.R. Kao, S.L. Chen, Y.A. Chang, Thermodynamic calculation of phase stability between copper and lead–indium solder, in: Proceedings of the Applications of Thermodynamics in the Synthesis and Processing of Materials, Rosemont, IL, USA, TMS, Warrendale, PA, 2–6 October 1995, pp. 171–185.
57. Kinetics of interfacial reaction in bimetallic Cu–Sn thin films10.1016/0001-6160(82)90201-2 ↗
58. Reaction kinetics of sloder-balls with pads in BGA packages during reflow soldering10.1007/s11664-999-0162-3 ↗
59. Formation and resettlement of (AuxSn1−x)Sn4 in solder joints of ball–grid-array packages with the Au/Ni surface finish10.1007/s11664-000-0010-y ↗
60. Interactions between solder and metallization during long-term aging of advanced microelectronic packages10.1007/s11664-001-0047-6 ↗
61. K. Banerji, R.F. Darveaux, Effect of aging on the strength and ductility of controlled collapse solder joints, in: Proceedings of the First International Conference on Microstructures and Mechanical Properties of Aging Materials, Chicago, IL, USA, The Minerals, Metals & Materials Society, 2–5 November 1993, pp. 431–442.
62. Z. Mei, P. Callery, D. Fisher, F. Hua, J. Glazer, Interfacial fracture mechanism of BGA packages on electroless Ni/Au, in: Proceedings of the Pacific Rim/ASME International Intersociety Electronic and Photonic Packaging Conference, Advances in Electronic Packaging, ASME, New York, USA, Vol. 2, 1997, pp. 1543–1550.
63. Inhibiting growth of the Au0.5Ni0.5Sn4 intermetallic layer in Pb–Sn solder joints reflowed on Au/Ni metallization10.1007/s11664-000-0009-4 ↗
64. Growth of a Au–Ni–Sn intermetallic compound on the solder–substrate interface after aging10.1007/s11661-000-0022-5 ↗
65. A. Zribi, R.R. Chromik, R. Presthus, J. Clum, K. Teed, L. Zavalij, J. DeVita, J. Tova, E.J. Cotts, Solder metallization interdiffusion in microelectronic interconnects, in: Proceedings of the 49th Electronic Components and Technology Conference, San Diego, CA, USA, IEEE, 1–4 June 1999, pp. 451–457.10.1109/ECTC.1999.776214 ↗
66. ITRI project on electroless nickel/immersion gold joint cracking10.1108/03056120010310882 ↗
67. E. Bradley, K. Banerji, Effect of PCB finish on the reliability and wettability of ball–grid-array packages, in: Proceedings of the 45th Electronic Components and Technology Conference, Las Vegas, Nevada, USA, IEEE, 21–24 May 1995, pp. 1028–1038.10.1109/ECTC.1995.517818 ↗
68. Z. Mei, P. Johnson, M. Kaufmann, A. Eslambolchi, Effect of electroless Ni/immersion Au plating parameters on PBGA solder joint attachment reliability, in: Proceedings of the 49th Electronic Components and Technology Conference, San Diego, CA, USA, IEEE, 1–4 June 1999, pp. 125–134.
69. L. Chase, P. Viswanadham, S. Dunford, Comparison of Ag, Ni/Au, and solder PWB surface finishes on the second level reliability of fine pitch area array assemblies, in: Proceedings of the SMTA International 2000, Rosemont, IL, USA, Surface Mount Technology Association, Edina, MN, USA, 24–28 September 2000, pp. 592–602.
70. R. Erich, R.J. Coyle, G.M. Wenger, A. Primavera, Shear testing and failure mode analysis for evaluation of BGA ball attachment, in: Proceedings of the 24th IEEE/CPMT International Electronics Manufacturing Technology Symposium, Austin, USA, IEEE, Piscataway, USA, 18–19 October 1999, pp. 16–22.10.1109/IEMT.1999.804791 ↗
71. S.C. Hung, P.J. Zheng, S.C. Lee, J.J. Lee, The effect of Au plating thickness of BGA substrates on ball shear strength under reliability tests, in: Proceedings of the 24th IEEE/CPMT International Electronics Manufacturing Technology Symposium, Austin, USA, IEEE, Piscataway, USA, 18–19 October 1999, pp. 7–15.10.1109/IEMT.1999.804790 ↗
72. Formation of intermetallic compounds in SnPbAg, SnAg, and SnAgCu solders on Ni/Au metallization10.1007/s11661-001-0058-1 ↗
73. K.Y. Lee, M. Li, D.R. Olsen, W.T. Chen, B.T.C. Tan, S. Mhaisalkar, Microstructure, joint strength and failure mechanism of Sn–Ag, Sn–Ag–Cu versus Sn–Pb–Ag solders in BGA packages, in: Proceedings of the 51th Electronic Components & Technology Conference, Orlando, FL, IEEE, Piscataway, USA, 29 May 29–31 June 2001, pp. 478–485.
74. T. Taguchi, R. Kato, S. Akita, A. Okuno, H. Suzuki, T. Okuno, Lead-free interfacial structures and their relationship to au plating (including accelerated thermal cycle testing of non-leaden BGA spheres), in: Proceedings of the 51th Electronic Components & Technology Conference, Orlando, FL, IEEE, Piscataway, USA, 29 May–31 June 2001, pp. 675–680.10.1109/ECTC.2001.927805 ↗
75. Effects of Cu and Ni addition to eutectic Pb–Sn solders on Au embrittlement of solder interconnections10.1557/JMR.2001.0175 ↗
76. J.D. Esdaile, J.C.H. McAdam, Thermodynamic properties and phase diagram of the binary alloy system Au–Ni, Proc. Aust. Inst. Min. Met. (240) (1971) 103–111.
77. A thermodynamic evaluation of the Au–Sn system10.1016/0040-6031(88)87045-X ↗
78. K. Zeng, J. Kivilahti, Thermodynamic calculation of saturation solubilities of some metals in Pb-free solders, Internal Report, Helsinki University of Technology, 2000.
79. The kinetics of precipitation from super-saturated solid solutions10.1016/0022-3697(61)90054-3 ↗
80. Wagner · Z. Electrochem. · 1961 · 65 · 581
81. V.V. Slezov, Theory of Diffusion Decomposition of Solid Solution, Harwood, New York, 1995, pp. 99–112.
82. K. Levis, A. Mawer, Assembly and solder joint relaibility of plastic ball–grid-array with lead-free versus lead–tin interconnect, in: Proceedings of the 50th Electronic Components & Technology Conference, Las Vegas, Nevada, USA, IEEE, Piscataway, USA, 21–24 May 2000, pp. 1198–1204.10.1109/ECTC.2000.853326 ↗
83. A. Syed, Reliability and Au embrittlement of Pb-free solders for BGA applicaiotns, in: Proceedings of the International Symposium on Advanced Packaging Materials: Processes, Properties and Interfaces, Chateau Elan, Georgia, IEEE, Piscataway, USA, 11–14 March 2001, pp. 143–147.10.1109/ISAOM.2001.916565 ↗
84. F. Zhang, M. Li, C.C. Chum, K.N. Tu, Influence of substrate metallization on diffusion and reaction at UBM/solder interface across a solder joint. J. Mater. Res. (2002) submitted for publication.10.1557/JMR.2002.0397 ↗
85. S. Brandenburg, S. Yeh, Electromigration studies of flip chip bump solder joints, in: Proceedings of the Surface Mount International Conference and Exposition, San Jose, CA, USA, SMTA, Edina, MN, USA, 23–27 August 1998, pp. 337–344.
86. International Roadmap for Semiconductor Technology, Semiconductor Industry Association, 1999.
87. Current crowding induced electromigration failure in flip chip solder joints10.1063/1.1432443 ↗
88. Electromigration in SnPb solder strips as a function of alloy composition10.1063/1.1319327 ↗
89. Interface diffusion in eutectic Pb–Sn solder10.1016/S1359-6454(98)00348-6 ↗
90. F.M. d’Heurle, P.S. Ho, in: J.M. Poate, K.N. Tu, J.W. Mayer (Eds.), Thin films: Interdiffusion and Reactions, Wiley, Chichester, UK, 1978, pp. 243–303.
91. Electromigration10.1088/0034-4885/52/3/002 ↗
92. Copper interconnections and reliability10.1016/S0254-0584(98)80000-X ↗
93. Response to comments on effect of current crowding on vacancy diffusion and void formation in electromigration10.1063/1.1386625 ↗
94. Numerical simulation of current crowding phenomena and their effects on electromigration in very large scale integration interconnects10.1063/1.1314613 ↗
95. Huntington · J. Phys. Chem. Solids · 1961 · 20 · 7610.1016/0022-3697(61)90138-X ↗
96. Electromigration in thin aluminium films on titanium nitride10.1063/1.322842 ↗
97. Stress generation by electromigration10.1063/1.89024 ↗
98. H.B. Huntington, in: A.S. Nowick, J.J. Burton (Eds.), Diffusion in Solids: Recent Developments, Academic Press, New York, 1974, p. 303.10.1016/B978-0-12-522660-8.50011-8 ↗
99. Electromigration in stressed thin films10.1103/PhysRevB.45.1409 ↗
100. Electromigration of eutectic SnPb and SnAg3.8Cu0.7 flip chip solder bumps and under-bump-metallization10.1063/1.1400096 ↗