Lead-free Solders in Microelectronics
Source abstract
Abstract
Abstract Practically all microelectronic assemblies in use today utilize Pb–Sn solders for interconnection. With the advent of chip scale packaging technologies, the usage of solder connections has increased. The most widely used Pb–Sn solder has the eutectic composition. Emerging environmental regulations worldwide, most notably in Europe and Japan, have targeted the elimination of Pb usage in electronic assemblies, due to the inherent toxicity of Pb. This has made the search for suitable “Pb-free” solders an important issue for microelectronics assembly. Approximately 70 Pb-free solder alloy compositions have been proposed thus far. There is a general lack of engineering information, and there is also significant disparity in the information available on these alloys. The issues involved can be divided into two broad categories: manufacturing and reliability/performance. A major factor affecting alloy selection is the melting point of the alloy, since this will have a major impact on the other polymeric materials used in microelectronic assembly and encapsulation. Other important manufacturing issues are cost, availability, and wetting characteristics. Reliability related properties include mechanical strength, fatigue resistance, coefficient of thermal expansion and intermetallic compound formation. The data available in the open literature have been reviewed and are summarized in this paper. Where data were not available, such as for corrosion and oxidation resistance, chemical thermodynamics was used to develop this information. While a formal alloy selection decision analysis methodology has not been developed, less formal approaches indicate that Sn-rich alloys will be the Pb-free solder alloys of choice, with three to four alloys being identified for each of the different applications. Research on this topic continues at the present time at a vigorous pace, in view of the imminence of the issue.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (99)
Show source-provided references
1. H.H. Manko, Solder and Soldering, 2nd Edition, McGraw-Hill, New York, 1979.
2. ASM International, Electronic Materials Handbook, Vol. 1, Packaging, Materials Park, OH, 1989, p. 55.
3. T.P. Vianco, Development of alternatives to lead-bearing solders, in: Proceedings of the Technical Program on Surface Mount International, 19 August–2 September 1993, San Jose, CA.
4. R.E. Reed-Hill, Physical Metallurgy Principles, PWS Publishing Company, Massachusetts, 1994, pp. 306–307.
5. K.J.R. Wassink, M.M.F. Verguld, Manufacturing Techniques for Surface Mounted Assemblies, Electrochemical Publications Ltd., 1995, GB-Port Erin, British Isles, p. 17.
6. In search of new lead-free electronic solders10.1007/BF02651363 ↗
7. E.R. Monsalve, Lead ingestion hazard in hand soldering environments, in: Proceedings of the 8th Annual Soldering Technology and Product Assurance Seminar, February 1984, Naval Weapons Center, China Lake, CA.
8. D. Napp, Lead-free interconnect materials for the electronics industry, in: Proceedings of the 27th International SAMPE Technical Conference, Albuquerque, NM, 9–12 October 1995, p. 342.10.1109/IEMT.1995.526121 ↗
9. An assessment of the use of lead in electronics assembly
10. J.O. Nriagu, J.M. Pacyna, Quantitative assessment of worldwide contamination of air, water and soils by trace metals, Nature 333 (6169) (1988) 134–139.10.1038/333134a0 ↗
11. Environmental Protection Agency, National Air Quality and Emission Trend Report, 1989, EPA-450/4-91-003, Research Triangle Park, NC, 1991.
12. Foreword
13. D. Napp, Lead-free interconnect materials for the electronics industry, in: Proceedings of the 27th International SAMPE Technical Conference, Albuquerque, NM, 9–12 October 1995, p. 343.10.1109/IEMT.1995.526121 ↗
14. E. Perrot, Electronic Packaging for the 21st Century, Advanced Packaging, July–August 1995.
15. Microstructure and mechanical properties of Pb-free solder alloys for low cost electronic assembly: a review10.1007/BF02651361 ↗
16. R. Wyckoff, World Class Outsourcing for Electronic Manufacturing, Technology Forecasters Inc., Berkeley, CA, 1998.
17. Metals demand in telecommunication
18. ASM International, Electronic Material Handbook, Vol. 1, Materials Park, OH, 1989, pp. 965–966.
19. D. Napp, Lead-free interconnect materials for the electronics industry, in: Proceedings of the 27th International SAMPE Technical Conference, Albuquerque, NM, 9–12 October 1995, pp. 334–337.10.1109/IEMT.1995.526121 ↗
20. IPC adopts lead-free position, Surf. Mount Technol. 13 (6) (1999) 64.
21. Industry Aids Environment, Japan Times, 14 October 1999, p. 10.
22. R.D. Brown, Jr., Indium in Commodity Data Summaries, U.S. Geological Survey, January 1999, p. 84.
23. R.D. Brown, Jr., Indium in Commodity Data Summaries, U.S. Geological Survey-Minerals Information, 1997.
24. Metallurgy of low temperature Pb-free solders for electronic assembly10.1179/imr.1995.40.2.65 ↗
25. C. Lea, A Scientific Guide to Surface Mount Technology, Electrochemical Publications Ltd., 1988, GB-Port Erin, British Isles, pp. 378–379.
26. W.R. Lewis, Notes on Soldering, Tin Research Institute, 1961, p. 66.
27. ASM International, Electronic Material Handbook, Vol. 1, Materials Park, OH, 1989, pp. 1161–1162.
28. Improved mechanical properties in new, Pb-free solder alloys10.1007/BF02651364 ↗
29. J.W. Morris, Jr., J.L.F. Goldstein, Z. Mei, Microstructure and mechanical properties of Sn–In and Sn–Bi solders, J. Electron. Mater. July (1993) 25–27.10.1007/BF03222376 ↗
30. Phase relationships in Bi–In–Sn alloy systems10.1179/mst.1986.2.10.985 ↗
31. The characterization of eutectic structure10.1098/rspa.1973.0111 ↗
32. R.W. Wild, Properties of Some Low Melting Fusible Alloys, Technical Report, IBM Federal Systems Division Laboratory, New York, 1971.
33. New Pb-free solder alloy with superior mechanical properties10.1063/1.109734 ↗
34. M. McCormack, S. Jin, G.W. Kammlott, The design of new Pb-free solder alloys with improved properties, IEEE 0-7803-2137-5/95, 1995.10.1109/ISEE.1995.514970 ↗
35. Superplastic creep of low melting point solder joints10.1007/BF02660403 ↗
36. Microstructure and creep of indium/tin on Cu and Ni substrates10.1007/BF02655434 ↗
37. J. Seyyedi, Thermal fatigue behavior of low melting point solder joints, Soldering Surf. Mount Technol. (13) (1993) 26–32.10.1108/eb037812 ↗
38. Metallurgy of low temperature Pb-free solders for electronic assembly10.1179/imr.1995.40.2.65 ↗
39. F. Hua, J. Glazer, Lead-free solders for electronic assembly, design and reliability of solders and solder interconnections, in: R.K. Mahidhara, D.R. Frear, S.M.L. Sastry, K.L. Liaw, W.L. Winterbottom (Eds.), The Minerals, Metals and Materials Society, 1997, pp. 65–74.
40. Wave soldering with a low melting point Bi–Sn alloy: effects of soldering temperatures and circuit board finishes10.1007/BF02659914 ↗
41. Investigation of multi-component lead-free solders10.1007/BF02651368 ↗
42. A study of lead-free solder alloys
43. I. Artaki, D.W. Finley, A.M. Jackson, U. Ray, P.T. Vianco, Wave soldering with lead-free solders, in: Proceedings of the Technical Program on Advanced Electronics Manufacturing Technologies, August 1995, SMI Surface Mount International, San Jose, CA, pp. 495–510.
44. A novel lead-free solder replacement
45. A.M Jackson, P.T. Vianco, I. Artaki, Manufacturing feasibility of several lead-free solders for electronic assembly, in: Proceedings of the 7th International SAMPE Electronics Conference, 20–23 June 1994, Parsippany, NJ, pp. 381–391.
46. Progress in the design of new lead-free solder alloys10.1007/BF03222379 ↗
47. A viable tin–lead solder substitute: Sn–Ag–Cu10.1007/BF02653344 ↗
48. A comparison of lead-free vs. eutectic solders
49. P.T. Vianco, F.M. Hosking, J.A. Rejent, Wettability analysis of tin-based, lead-free solders, in: Proceedings of the Technical Program — National Electronic Packaging and Production Conference, Vol. 3, Published by Cahner Exposition Group, 1992, Anaheim, CA, pp. 1730–1738.
50. D.B. Knorr, L.E. Felton, Designing lead-free solder alloys for advanced electronics assembly, in: Proceedings of the 1994 Design for Manufacturability Conference, ASME N.Y., New York, pp. 27–34.
51. New lead-free, Sn–Zn–In solder alloys10.1007/BF02653357 ↗
52. M. Hansen, K. Anderko, Constitution of Binary Alloys, McGraw-Hill, New York, 1958.10.1149/1.2428700 ↗
53. R.J.K. Wassink, Soldering in Electronics, 2nd Edition, Electrochemical Publications Ltd., 1989, GB-Port Erin, British Isles, pp. 36–37.
54. F.H. Howie, C. Lea, Blowholing in PTH solder fillets — towards a solution, in: Proceedings of INTERNEPCON UK, Brighton, 1984, pp. 104–111.
55. Measurement of solder-flux-vapor surface tension by a modified maximum bubble pressure technique10.1063/1.1134615 ↗
56. Surface tension of solder alloys
57. M.A. Carroll, M.E. Warwick, Surface tension of some Sn–Pb alloys: Part I. Effect of Bi, Sb, P, Ag and Cu on 60Sn–40Pb solder, Mater. Sci. Technol. 3 (12) (1986) 1040–1045.10.1179/mst.1987.3.12.1040 ↗
58. Alternative solders for electronics assemblies10.1108/eb046210 ↗
59. K. Tojima, Wetting Characteristics of Lead-free Solders, Senior Project Report, Materials Engineering Department, San Jose State University, May 1999.
60. L.E. Felton, C.H. Raeder, C.K. Havasy, D.B. Knorr, Pb-free soldering alternatives for fine pitched electronics packaging, in: Proceedings of the 13th IEEE/CHMT International Symposium on Electronics Manufacturing Technology, Materials Engineering Department, Rensselaer Polytechnic Institute, Troy, NY, pp. 300–304.10.1109/IEMT.1992.639908 ↗
61. Tsung-Yu Pan, J. Nicholson, H. Blair, R. Poulson, R. Cooper, D. Mitlin, M.F. Cheung, Dynamic wetting characteristics of some lead-free solders, in: Proceedings of the 7th International SAMPE Electronics Conference, 20–23 June 1994, Ford Research Laboratory, Ford Motor Company.
62. Issues in the replacement of lead-bearing solders10.1007/BF03222374 ↗
63. Evaluation of lead-free joints in electronic assemblies10.1007/BF02651370 ↗
64. P.T. Vianco, C. May, An evaluation of prototype surface mount circuit boards assembled with three non-lead bearing solders, in: Proceedings of the Technical Program on Advanced Electronics Manufacturing Technologies, SMI Surface Mount International, San Jose, CA, 1995, pp. 481–494.
65. J. Collazo, Effect of Surface Stresses on Wetting of Copper by Solder, Senior Project Report, Department of Materials Engineering, San Jose State University, May 1997.
66. Lead-free solder joint evaluation
67. Interdiffusion and reaction in bimetallic Cu–Sn thin films10.1016/S0254-0584(97)80016-8 ↗
68. Effects of Fe, Ni, and Sn on reaction diffusion at solder/Cu base alloy interface10.2320/jinstmet1952.48.9_863 ↗
69. P.J. Kay, C.A. Mackay, The growth of intermetallic compounds on common base materials coated with tin and tin–lead alloys, Trans. Instit. Metal Finish. 54 (1976).10.1080/00202967.1976.11870376 ↗
70. Dependence of Cu/Sn and Cu/60Sn40Pb solder joint strength on diffusion controlled growth of Cu3Sn and Cu6Sn510.1557/PROC-40-129 ↗
71. M. Hansen, K. Anderko, Constitution of Binary Alloys, McGraw-Hill, New York, 1958, p. 1218.10.1149/1.2428700 ↗
72. ASM International, ASM Handbook, Vol. 3, Alloy Phase Diagrams, 1992.
73. C.J. Thwaites, Soft Soldering Handbook, International Tin Research Institute, Publication No. 533, 1977.
74. Y. Yamagishi, M. Ochiai, H. Ueda, T. Nakanishi, M. Kitazima, Pb-free solder of Sn–58Bi improved with Ag, in: Proceedings of the 9th International Microelectronics Conference, 24–26 April 1996, Omiya, Japan, pp. 252–255.
75. L.H. Van Vlack, Materials Science for Engineers, Addison-Wesley, Reading, MA, 1970, p. 192.
76. ASM International, Electronic Materials Handbook, Vol. 1, Packaging, Materials Park, OH, 1989, p. 640.
77. Solder alloy data: mechanical properties of solders and soldered joints, International Tin Research Institute, Uxbridge, England, p. 60.
78. The mechanical properties and microstructures of copper and brass joints soldered with eutectic tin–bismuth solder10.1007/BF01132413 ↗
79. J.S. Hwang, Solder Paste in Electronic Packaging, Van Nostrand Reinhold, New York, 1989.10.1007/978-94-011-6050-6 ↗
80. The mechanical behavior of interconnect materials for electronic packaging
81. C. Lea, A Scientific Guide to Surface Mount Technology, Electrochemical Publications Ltd., GB-Port Erin, British Isles, 1988.
82. Constitutive relations for tin-based solder joints, IEEE transactions on components
83. D.R. Frear, W.B. Jones, K.R. Kinsman, Solder Mechanics: A State of the Art Assessment, TMS Publications, Warrendale, PA, 1991.
84. R. Strauss, S. Smernos, Low Temperature Soldering, The Bulletin of the Bismuth Institute, No. 49, 1986.
85. Marshall · Int. J. Hybrid Microelectron. · 1987 · 10 · 11
86. ASM International, Electronic Materials Handbook, Vol. 1, Packaging, Materials Park, OH, 1989, p. 58.
87. M. Abtew, Corrosion of Indium Based Solders Induced by Flux Residue and Ionic Contamination, Amdahl Corporation, Technical Bulletin, 1993.
88. J.R. Lloyd, C. Zhang, Leong H. Tan, D. Shangguan, A. Achari, Measurements of thermal conductivity and specific heat of lead-free solder, in: Proceedings of the IEEE/CPMT International Symposium on Electronic Manufacturing Technology, Omiya, Japan, 1995, pp. 252–262.10.1109/IEMT.1995.526123 ↗
89. R.P. Elliot, Constitution of Binary Alloys, Suppl. 1, McGraw-Hill, New York, 1965.
90. F.A. Shunk, Constitution of Binary Alloys, Suppl. 2, McGraw-Hill, New York, 1969.
91. Jones, D.A., Principles and Prevention of Corrosion, Macmillan, New York, 1992, p. 43.
92. W.F. Smith, Principles of Materials Science and Engineering, 2nd Edition, McGraw-Hill, New York, 1990, p. 724.
93. J.F. Kuhmann, A. Preuss, B. Adolphi, K. Maly, T. Wirth, W. Oersterle, W. Pittroff, G. Weyer, M. Fanciulli, Oxidation and reduction kinetics of eutectic SnPb, InSn and AuSn: a knowledge base for fluxless solder bonding applications, in: Proceedings of Electronic Components and Techmology Conference, IEEE, 1997, San Jose, CA, pp. 120–126.10.1109/3476.681391 ↗
94. N.I. Sax, R.J. Lewis, Sr., Dangerous Properties of Industrial Materials, 7th Edition, Van Nostrand Reinhold, New York, 1989, p. 2067.
95. N.I. Sax, R.J. Lewis, Sr., Dangerous Properties of Industrial Materials, 7th Edition, Van Nostrand Reinhold, New York, 1989, p. 1985.
96. N.I. Sax, R.J. Lewis, Sr., Dangerous Properties of Industrial Materials, 7th Edition, Van Nostrand Reinhold, New York, 1989, p. 277.
97. N.I. Sax, R.J. Lewis, Sr., Dangerous Properties of Industrial Materials, 7th Edition, Van Nostrand Reinhold, New York, 1989, p. 522.
98. The trek towards lead-free solders
99. Lead-free assembly of mixed-technology PCB’s