journal article·2026-07-02

Effect of wall thickness on the microstructure and properties of Ti-6Al-4V schwarz diamond structure prepared by selective laser melting

XinYu Zhang, Chun Guo, WenQing Li, GuangCan Huang, QingCheng Lin, Chi Qin

Publisher page

Abstract

The influence of wall thickness on the microstructure and mechanical properties of Ti-6Al-4V schwarz diamond structures prepared by selective laser melting was studied. The study selected schwarz diamond structures with different wall thicknesses. The experimental results show that the actual porosity of the molded part differs from the design value by 10.88%-12.12%;The microstructure of molded parts with different wall thicknesses is composed of needle shaped α martensite; With the increase of wall thickness, the tensile strength is enhanced. The tensile strength of 0.3 mm wall thickness is 68.06 MPa and the tensile strength of 0.6 mm wall thickness is 165.42 MPa. As the wall thickness increases, the compressive strength of the molded part gradually increases. As the wall thickness increases, the impact energy absorption capacity of the molded part increases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Anhui Science and Technology University

Funding

Anhui Province Science and Technology Innovation Tackle Plan Projec · Reserve candidates for academic and technical leaders of Anhui Science and Technology Universit · The Fund of Beijing Science and Technology Pla · Bengbu Science and Technology Plan Projec · The University Synergy Innovation Program of Anhui Provinc · Anhui Province Graduate Education Quality Engineering Projec · Foundation of Colleges and Universities in Anhui Provinc · Excellent top talent project in Colleges and Universitie

References (36)

Show source-provided references
1. 10.1007/s40194-024-01835-010.1007/s40194-024-01835-0 ↗
2. 10.1080/02670836.2022.213053010.1080/02670836.2022.2130530 ↗
3. 10.1080/02670836.2023.219888910.1080/02670836.2023.2198889 ↗
4. 10.1080/02670836.2023.223041710.1080/02670836.2023.2230417 ↗
5. 10.1080/00084433.2025.251880810.1080/00084433.2025.2518808 ↗
6. Li K, Tian C, Wei Q, et al. Design and study of additively manufactured three periodic minimal surface (TPMS) structured porous titanium interbody cage. Heliyon 2024; 10: e38209.
7. 10.1016/j.wear.2022.20453210.1016/j.wear.2022.204532 ↗
8. 10.1016/j.matdes.2024.11312110.1016/j.matdes.2024.113121 ↗
9. 10.1016/j.surfcoat.2024.13073510.1016/j.surfcoat.2024.130735 ↗
10. 10.3390/sci604008510.3390/sci6040085 ↗
11. 10.1016/j.ijmecsci.2021.10658610.1016/j.ijmecsci.2021.106586 ↗
12. 10.1016/j.tws.2023.11121410.1016/j.tws.2023.111214 ↗
13. 10.1016/j.jallcom.2025.17938010.1016/j.jallcom.2025.179380 ↗
14. 10.1016/j.vacuum.2023.11281810.1016/j.vacuum.2023.112818 ↗
15. 10.3390/met1410116510.3390/met14101165 ↗
16. 10.1007/s00170-019-04422-610.1007/s00170-019-04422-6 ↗
17. 10.1007/s40997-025-00844-810.1007/s40997-025-00844-8 ↗
18. 10.3390/ma1103037410.3390/ma11030374 ↗
19. 10.1108/ILT-11-2024-041410.1108/ILT-11-2024-0414 ↗
20. 10.3390/met1205070210.3390/met12050702 ↗
21. 10.1016/j.matchemphys.2024.12979110.1016/j.matchemphys.2024.129791 ↗
22. 10.1007/s11665-024-10476-910.1007/s11665-024-10476-9 ↗
23. 10.3390/ma1717443310.3390/ma17174433 ↗
24. 10.1016/j.ijimpeng.2024.10514710.1016/j.ijimpeng.2024.105147 ↗
25. 10.1016/j.matdes.2017.10.04010.1016/j.matdes.2017.10.040 ↗
26. Sokollu B, Gulcan O, Konukseven EI. Mechanical properties comparison of strut-based and triply periodic minimal surface lattice structures produced by electron beam melting. Addit Manuf 2022; 60: 103199.
27. 10.1080/15376494.2022.205390610.1080/15376494.2022.2053906 ↗
28. 10.1016/j.applthermaleng.2025.12688710.1016/j.applthermaleng.2025.126887 ↗
29. 10.1016/j.tws.2023.11128810.1016/j.tws.2023.111288 ↗
30. Veeraiahgari V, Regalla SP, Kurra S. Flexural performance of high strength-to-weight ratio strut-based and surface-based lattice-structured inconel-718 parts manufactured by laser powder bed fusion. J Br Soc Mech Sci Eng 2024; 46: 637.
31. 10.1016/j.jmbbm.2015.06.02410.1016/j.jmbbm.2015.06.024 ↗
32. 10.1016/j.addma.2019.10084610.1016/j.addma.2019.100846 ↗
33. 10.1016/j.mtcomm.2023.10735210.1016/j.mtcomm.2023.107352 ↗
34. 10.1016/j.actbio.2019.07.04910.1016/j.actbio.2019.07.049 ↗
35. 10.1016/j.jmrt.2024.08.09210.1016/j.jmrt.2024.08.092 ↗
36. 10.1002/adem.20210064610.1002/adem.202100646 ↗