journal article·2026-06-30

Synthesis and characterization of multiwall carbon nanotube added Fe-Mn-Al-Si-C low-density steel processed by mechanical alloying and spark plasma sintering

Anil Kumar, Raj Bahadur Singh

Publisher page

Abstract

A novel carbon nanotube-added low-density steel, Fe56.75Mn25Al15Si2C0.25 + CNT1, was developed via mechanical alloying followed by spark plasma sintering. X-ray diffraction revealed predominant BCC phases (Fe1.90Mn0.10 and Mn0.90Al1.10) along with minor intermetallics (Fe10Si6 and Mn20C8) after milling and were retained after sintering, further, the phases simulated by CALPHAD are closely aligned with those observed by XRD. Electron microscopy confirmed the successful integration of multiwalled carbon nanotubes into the steel matrix. The Spark plasma sintered sample achieved a density of 5.83 g/cm 3 , significantly lower than conventional steel. Microhardness reached ∼11 GPa with an elastic modulus of 214 GPa and compressive strength is 1134 MPa, indicating superior mechanical performance. The strain hardening exponent n and strength coefficient K are calculated as 0.47 and 3354 MPa respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute of Technology Hamirpur

References (74)

Show source-provided references
1. 10.1016/j.msea.2014.08.06410.1016/j.msea.2014.08.064 ↗
2. 10.1016/j.jmrt.2024.01.27210.1016/j.jmrt.2024.01.272 ↗
3. 10.1016/j.jmrt.2023.06.03710.1016/j.jmrt.2023.06.037 ↗
4. 10.1016/j.pmatsci.2017.05.00210.1016/j.pmatsci.2017.05.002 ↗
5. 10.1007/s11837-014-1032-x10.1007/s11837-014-1032-x ↗
6. 10.1007/s12666-021-02262-110.1007/s12666-021-02262-1 ↗
7. 10.4273/ijvss.17.5.1510.4273/ijvss.17.5.15 ↗
8. 10.3390/ma1421663110.3390/ma14216631 ↗
9. 10.1016/j.dt.2022.11.01910.1016/j.dt.2022.11.019 ↗
10. 10.1007/s11665-025-10662-310.1007/s11665-025-10662-3 ↗
11. 10.1016/j.msea.2023.14510910.1016/j.msea.2023.145109 ↗
12. 10.1016/j.jma.2022.06.01210.1016/j.jma.2022.06.012 ↗
13. Zhou Y, Man T, Wang J, et al. Secondary phase precipitation in Fe-22Mn-9Al-0.6C low-density steel during continuous cooling process. Materials (Basel) 2024; 17: 31.
14. 10.1038/s41598-023-49026-z10.1038/s41598-023-49026-z ↗
15. 10.1088/1468-6996/14/1/01420510.1088/1468-6996/14/1/014205 ↗
16. 10.1016/j.actamat.2017.08.04910.1016/j.actamat.2017.08.049 ↗
17. 10.1016/j.matlet.2023.13542110.1016/j.matlet.2023.135421 ↗
18. 10.1016/j.msea.2022.14413210.1016/j.msea.2022.144132 ↗
19. 10.1016/j.actamat.2020.03.02210.1016/j.actamat.2020.03.022 ↗
20. 10.1016/j.actamat.2017.09.02610.1016/j.actamat.2017.09.026 ↗
21. 10.1007/s41230-022-2033-y10.1007/s41230-022-2033-y ↗
22. 10.1016/j.matdes.2021.10981310.1016/j.matdes.2021.109813 ↗
23. 10.1016/j.scriptamat.2012.10.00410.1016/j.scriptamat.2012.10.004 ↗
24. 10.2355/isijinternational.ISIJINT-2020-46710.2355/isijinternational.ISIJINT-2020-467 ↗
25. 10.1016/j.carbon.2009.01.01110.1016/j.carbon.2009.01.011 ↗
26. 10.1007/s11665-018-3405-810.1007/s11665-018-3405-8 ↗
27. 10.1007/s11661-017-4233-410.1007/s11661-017-4233-4 ↗
28. 10.1007/s11661-016-3892-x10.1007/s11661-016-3892-x ↗
29. 10.1007/978-981-10-7892-7_1210.1007/978-981-10-7892-7_12 ↗
30. 10.1016/j.matpr.2020.02.31210.1016/j.matpr.2020.02.312 ↗
31. 10.1557/s43578-023-01162-y10.1557/s43578-023-01162-y ↗
32. 10.1088/0957-4484/17/1/00210.1088/0957-4484/17/1/002 ↗
33. Fredriksson T, Holleboom T. Carbon nanotubes: a theoretical study of young’s modulus. Heal Sci Technol 2014; 30: 1–57.
34. 10.1016/j.compositesa.2018.08.01010.1016/j.compositesa.2018.08.010 ↗
35. 10.1007/s12666-021-02242-510.1007/s12666-021-02242-5 ↗
36. 10.1016/j.wear.2022.20428110.1016/j.wear.2022.204281 ↗
37. 10.1016/j.msea.2017.06.06610.1016/j.msea.2017.06.066 ↗
38. 10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
39. Suryanarayana C. Recent developments in mechanical alloying. Rev Adv Mater Sci 2008; 18: 203–211.
40. 10.1016/j.msea.2017.08.03010.1016/j.msea.2017.08.030 ↗
41. 10.1002/srin.20060644010.1002/srin.200606440 ↗
42. 10.3390/met1102034510.3390/met11020345 ↗
43. 10.2355/isijinternational.50.89310.2355/isijinternational.50.893 ↗
44. 10.1016/j.msea.2020.13928610.1016/j.msea.2020.139286 ↗
45. 10.1016/j.jallcom.2020.15785110.1016/j.jallcom.2020.157851 ↗
46. 10.1016/j.msea.2016.07.02910.1016/j.msea.2016.07.029 ↗
47. 10.1007/s11837-014-1084-y10.1007/s11837-014-1084-y ↗
48. 10.1007/s41230-021-1026-610.1007/s41230-021-1026-6 ↗
49. 10.1007/s11837-014-1128-310.1007/s11837-014-1128-3 ↗
50. 10.1179/095066009X1257253017054310.1179/095066009X12572530170543 ↗
51. 10.1007/s10853-006-6555-210.1007/s10853-006-6555-2 ↗
52. 10.1088/0031-9120/40/5/00810.1088/0031-9120/40/5/008 ↗
53. 10.1016/j.actamat.2016.08.08110.1016/j.actamat.2016.08.081 ↗
54. 10.1016/j.msea.2022.14402910.1016/j.msea.2022.144029 ↗
55. 10.1016/S1006-706X(16)30145-510.1016/S1006-706X(16)30145-5 ↗
56. 10.1016/j.msea.2023.14477610.1016/j.msea.2023.144776 ↗
57. 10.1016/j.jallcom.2021.16269410.1016/j.jallcom.2021.162694 ↗
58. 10.1016/j.jallcom.2020.15501310.1016/j.jallcom.2020.155013 ↗
59. Kumar H, Kumar RP, Manna R, et al. Microstructure and mechanical properties of multiaxially forged Fe–30Mn–9Al–0.8C and Fe – 20Mn – 10Al – 1C low-density steels. Ironmak Steelmak 2025; 15: 1–15. https://doi.org/10.1177/03019233251315815
60. 10.1002/adem.20090006110.1002/adem.200900061 ↗
61. Frommeyer G, Drewes EJ, Engl B. Physical and mechanical properties of iron-aluminium (Mn, Si) lightweight steels. Metall Reaearch Technol 2000; 97: 1245–1253.
62. 10.1016/j.matdes.2015.11.11510.1016/j.matdes.2015.11.115 ↗
63. 10.3390/met903033010.3390/met9030330 ↗
64. 10.1016/j.jallcom.2018.10.25310.1016/j.jallcom.2018.10.253 ↗
65. 10.1016/j.jallcom.2018.11.13410.1016/j.jallcom.2018.11.134 ↗
66. 10.3390/ma1319442110.3390/ma13194421 ↗
67. Liu D, Ding H, Cai M, et al. Hot deformation behavior and processing map of a Fe-11Mn-10Al-0.9C duplex low-density steel susceptible to k-carbides. J Mater Eng Perform 2019; 1: 1059–9495.
68. 10.3390/met1210157210.3390/met12101572 ↗
69. 10.1007/s12008-023-01313-910.1007/s12008-023-01313-9 ↗
70. Banerjee S, Gogoi S, Siddiqui HR, et al. Development of Hall-Petch and Hollomon models for thermo-mechanically treated Al-Cu-Mg alloys with trace additions of sn. Adv Mater Process Technol 2024; 10: 2895–2917.
71. 10.1088/1757-899X/655/1/01200810.1088/1757-899X/655/1/012008 ↗
72. 10.1007/s10853-018-2551-610.1007/s10853-018-2551-6 ↗
73. Carneiro I, Simoes S. Strengthening mechanisms in carbon nanotubes reinforced metal matrix composites : a review. Metals (Basel) 2021; 11: 1–27.
74. 10.1179/1743284714Y.000000051510.1179/1743284714Y.0000000515 ↗